Wood siding: types and colors

Siding is a finishing material, which is currently very popular among consumers. Wood siding always looks very beautiful, no matter what colors it is.

Advantages and disadvantages

The buildings made of wood look very presentable, beautiful, natural, and therefore this material is chosen by many. However, some are not satisfied with such disadvantages of wood, as capriciousness in use and difficulty in care. It is also worth noting that construction work with wood is usually quite expensive. With a siding imitating a wooden surface, in all these plans is much easier.

Such coatings appeared about half a century ago in Canada and North America, and they very quickly became popular due to the large number of advantages.Previously, siding, imitating a wooden surface, was used only for buildings made of wood, but now it is chosen for a variety of buildings.

Siding can imitate even the curvature of logs. With the help of this material, any building can be given a special style.

The main advantages of wood siding:

  • environmental friendliness;
  • profitability;
  • esthetics;
  • fire resistance (such materials do not spread fire and do not burn themselves);
  • the ability to provide excellent ventilation of the building (if properly carry out installation work, the humidity level and the microclimate in the room will be optimal);
  • ease of installation, low weight;
  • high strength (surfaces finished with siding do not have to be further strengthened);
  • resistance to insects, sunlight, mold, rust;
  • resistance to temperature extremes, cold, heat, various atmospheric influences;
  • opportunity to do without noticeable joints;
  • ability to provide sound and heat insulation.

Siding is a material that can last for a very long time (up to half a century). Particularly careful care of such coatings is not required: it is enough just to wash them from time to time. If the need arises, you can easily replace individual elements.

The disadvantage of siding panels is that they are not easy to attach to broken and curved bases.

Kinds

Front siding under the wood is divided into several types, depending on the structure of the coating. There are the following types of materials for exterior decoration.

  • "Herringbone". This option is not very popular among Russians, because such materials are more often offered by foreign manufacturers.
  • Block house or "under the log". Most often, such materials are chosen for country buildings. So you can achieve similarities with log cabins.
  • "Shipboard". Such coatings can be called classic.
Herringbone
Block house or "under the log"
"Shipboard"

Siding can be vertical or horizontal. Vertical panels are used less often horizontal, but lately they have become popular, because they look very interesting. Some consumers even prefer to combine different elements. Siding wood panels are divided into different types depending on the material from which they are made.

Vertical
Horizontal

Usually, consumers buy vinyl, acrylic, metal (for example, aluminum) or wood siding.

Vinyl

This siding is resistant to mechanical stress and frost. It will be able to serve for a very long time, and at the same time it will not lose its color, it will remain beautiful and will provide reliable protection for the foundation. Vinyl coatings are environmentally friendly, they are not subject to rotting. The building will not prematurely collapse because no insects or parasites are created in the coatings.

Vinyl siding panels are coated with a special coating, making them more durable and absorbing heat. Vinyl siding is very much like a natural wooden surface. The price of such products is quite affordable, and installation work is usually carried out without significant difficulties.

Vinyl siding does not spread fire, does not ignite. You will not need to take care of him after the installation work. Such panels are flexible, they can even be used for rounded bases.

Acrylic

Acrylic siding products are also quite easy to install, especially careful care of them is not needed.Externally, acrylic and vinyl materials are similar to each other, but there are some differences in the characteristics.

Acrylic coatings are resistant to mechanical stress and wear. They are resistant to high and low temperatures, able to maintain properties in cold and heat. Such coatings are not affected by UV radiation. Acrylic siding is resistant to chemicals, acids, alkalis, oils. Acrylic siding panels can be glossy, they have different shapes. Thanks to a special embossing, it is possible to imitate rounded logs.

You can choose an option that fits perfectly into the overall design of the house.

Metal

Metal panels are very easy to install, usually installation work is carried out as soon as possible. Metal siding has a long service life. Such panels are environmentally friendly, they are well concealed various disadvantages of surfaces. Before installing the metal siding does not need to level the base. The color of such coatings remains the same even in those cases when they are exposed to UV light for a long time.

There are many advantages to metal siding, but it should be noted that the protective coating should not be damaged. If it is nevertheless burned or spoiled in any other way, prime the damaged area and apply paint to it to match the tone of the panel.

Wooden

Wood siding is a material that many consumers prefer. Such coatings provide coziness and comfort in the house, because they have such a wonderful property as thermal conductivity. Such materials are not afraid of even very low temperatures; This quality is especially important for residents of the northern regions. Wood siding is easy to install.

However, wood siding panels also have disadvantages. Wood products are not resistant to high temperatures or fire resistance, so they should be kept away from sources of ignition. Residents of the southern regions better to opt for other materials. For such coatings need special care. It is recommended to use antifungal, waterproofing agents. Wood siding is best not to apply in places where very high humidity is typical.

For additional protection of a tree it is worth applying wood stain or varnish on it.

Dimensions

The length of the siding panels varies from 200 to 600 cm. Usually their width is from 0.1 to 0.3 m. Siding is a rather thin coating, most often its thickness is about 0.1 cm. Since such products are light, they are very convenient in using. In the implementation of finishing work problems arise quite rarely.

Colors

In modern stores you can find siding panels of various shades. Manufacturers offer a variety of options: from dark walnut and pistachio to golden oak, chestnut, cappuccino. Among the most popular options can be identified sandalwood, oak, cherry.

Selecting the most appropriate shade of siding, focus on the overall design of the building. In general, the design of the house sheathed should create a sense of harmony.

How to choose?

To find the right siding for a facade of aerated concrete or other material, It is necessary to take into account certain recommendations.

  • Consider the likelihood of a fire. In some regions it is worth using only those materials that are fire resistant.
  • For frame-shield, block houses, buildings made of brick siding panels are particularly well suited for metal.
  • Choosing metal products, pay special attention to how well the finish coating. It should be uniform.
  • When purchasing acrylic or vinyl coatings, focus on the quality of the cuts. There should be no noticeable cracks on the surface (this is especially true for products that are embossed).
  • When selecting materials from wood, pay attention to the wood type and quality. Protective antiseptic agents should be applied to the products.
  • Make sure that the warranty of the manufacturer, quality certificate.

Since all of the above materials have both advantages and certain disadvantages, it is rather difficult to say which siding is the best. It all depends on the specific situation. However, in any case, preference should be given to products of manufacturers who have won the trust of consumers.

If the most important quality for you is fire resistance, you should choose materials from metal. For lovers of naturalness, wood is well suited.If you need relatively inexpensive coatings, you should stop the choice on plastic. Whatever material you choose, you should take into account all the recommendations of experts regarding the implementation of installation works.

If they are held according to the rules, the results will not disappoint; and coverage will last as long as possible.

Subtleties of installation

Before installation, remove protruding elements from the facade wall, remove bushes and tree branches that are located near the base. Remove from the wall the old peeling coating, mold, dust, various contaminants.

If the base is made of wood, assess its condition. Loose boards will need to be fixed, rotten ones must be replaced. If the surface is concrete or brick, pre-install a strong frame made of a metal profile or wooden bars. To facing materials are not deformed due to temperature differences, install products so that they overlap each other (at least - 30 mm).

Use the grinder for cutting panels should be with the utmost care, otherwise it is possible that the products will melt around the edges.

Beautiful examples

  • Acrylic materials over time, do not change their color, they will always look very beautiful.
  • Vinyl materials very similar to natural wood.
  • Metal products suitable if you want to get aesthetic and maximum durable coating.
  • Wood siding - ideal for those who appreciate the beauty and benefits of natural materials.

You will learn more about wood siding in the following video.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom