Installation for the toilet: what is it and how to choose?

The modern market of sanitary appliances is full of different models. When arranging a bathroom, it is necessary to become familiar with the device of new equipment. This article describes the installation for the toilet: what it is, and how to choose the desired structure.

Translated from English, the term installation literally means "hidden, embedded." An installation for a toilet bowl is a device consisting of several modules. It is located in the wall and serves to fix the toilet with a cistern.

The installation holds all the elements of the toilet: the drain tank, the system of water and sewer pipes, the mechanisms of fastening the toilet.

The frame kit has some special features.

• Drain tank can be made from polymers. Plastic, unlike ceramics, has a relatively low weight. The lightweight model is easily fixed to the frame and does not create excessive load. Stone product strongly affects the frame, which can lead to the unwinding of fasteners and the collapse of the device. The tank is mounted inside the wall, so its appearance does not matter.
• The button for flushing the tank must be located on the side. The traditional model of this device involves the location of the lever on the tank lid. Plumbing construction of this type will not work in the frame.
• Modern tanks differ in two-sectional discharge: one button provides a complete descent of water, and the second drains a third of the volume. Such devices help to control the flow of fluid if a water meter is installed in the house.

After installation of the installation, only the toilet and the drain button remain in the room. - this technical solution plays an important role in freeing up the space of a small-sized room. The toilet is mounted on weight. To sustain such a construction, the installation is attached either to the wall only, or to the wall and floor at the same time. Fasteners are durable and can withstand weight up to 400 kg.

In addition to the frame system, there is an installation with block fasteners. The unit can be installed frontally to the partitions - this method is necessary if the wall in the bathroom is not bearing. Installation of the frame is made using special mounts. When mounted to a wall, the position can be adjusted with fasteners. The studs are designed to fix the frame on the floor, and the "paws" hold the structure on a vertical surface.

Suspended version of the installation of the toilet repels buyers with the illusion of insecurity. For this reason, most apartment owners prefer to install a floor standing device.

To dispel doubts, manufacturers highlight some of the benefits of a new installation technology.

• The ability to hide pipes allows you to give the room an aesthetic look. Free space can be decorated with mosaics or colored plaster. The application of any coating on the wall is greatly facilitated.
• The suspended design of the toilet bowl allows installing water floors along the entire perimeter of the room. You can stick to the spiral pipe-laying system without using a complex structure. The lightweight system allows you to save on materials and time in laying the floor.

• Facilitates the process of laying the floor covering - there is no need to trim the tiles along the contour of the toilet bowl. Fragile ceramic coating is easy to spoil, so the masters advise to avoid cutting the material.
• The ability to clean the entire surface of the floor, processing butt joints. In the bathroom it is necessary to maintain cleanliness, so the hanging device of the toilet bowl in some cases is even necessary.
• A drain tank built into the wall creates less noise - water can be lowered by placing the tank outdoors.

When constructing a suspended structure, it is imperative to take into account the dimensions of the devices and the peculiarities of their fastening - the parameters of the frame or duct must correspond to the sanitary devices. Each item requires a preliminary measurement.Before acquiring a particular structure, it is necessary to become familiar with the features of installation and construction.

The appearance of the installations is almost indistinguishable, but according to the method of fixing and picking, the toilet hangers are divided into three categories. One of the systems is a block variant. The built-in plastic tank of this design is fixed inside the metal frame. Complete with this installation get fixture for installation of sanitary devices.

The design is installed in a niche, the role of which is often played by the front wall of the toilet. A special niche is being erected in the form of a side cabinet in which the blocks are laid. The system can be closed with a plasterboard wall with a decorative finish. The recessed block can be held only by the bearing wall - the partition will not cope with the weight of the structure.

The advantage of this design is its low price, as well as the ability to put a floor-mounted toilet.It is important to know that the block system works only with strong reliable anchors and competent niche device. A niche implies a device compartment in which a flush tank and pipes are installed. The space below the blocks is necessary to impose bricks in order to avoid collapse of the structure. Installing this system requires partial dismantling of the wall, which greatly complicates the repair process.

In most cases, the master advised to resort to the device frame installation. - the installation of this system does not require much effort, and the design itself is durable and has a long service life. The frame is produced and metal of high strength. The design is fixed at four points and, if possible, supported on the floor. The built-in drain tank is fixed with special elements.

The frame is installed on the wall or in the corner of the room. Corner design helps save space. It is suitable for fixing bidets, sinks, and also for a urinal. Such frames differ from analogs in high price and long service life, so the cost of the purchase and installation will pay off.

Installations for the toilet also differ by the type of flush panel. Drain buttons must be durable, as they will experience constant mechanical stress. The panel should have a simple and harmonious design, not to stand out from the overall design of the bathroom wall.

Customers can purchase button types from the following materials.

• Plastic. Polymers have a low cost. Such panels have become widespread in the market due to their long service life. In addition, the plastic has a presentable appearance.
• Metal. Stainless steel panels have increased impact resistance. On sale you can find analogues of black chrome steel, but the cost of such devices is quite high.
• Glasses. This type of panels has a wide palette of shades and variability of textures. Glass coatings are often complemented with metal or wood inserts, giving the device sophistication. Contrary to expectations, the glass is able to withstand prolonged loads, while maintaining its appearance.

By the principle of operation, the panels are divided into dual-mode, “sink-stop” and non-contact. The first group includes the above-mentioned buttons with the possibility of full or partial discharge of water in the tank. The "stop-flush" function allows you to turn off the flow of fluid at any time. Panels with both functions are easy to install, as they work without electricity. Such devices are considered to be the most reliable.

Touch buttons do not require pressing the surface - they are equipped with special sensors that react to movement. Contactless buttons require an electrical connection and power supply installation. The cost of such devices is high, but it is easier to use them. The design of touch screens is called futuristic - this design will be an excellent completion of the modern interior of the bathroom.

The main dimensions of the frame installation are the dimensions of the frame and components. The drain tank of any manufacturer has standard sizes with minimal deviations.

Plastic thickness reaches 90 mm, and width - 50 cm. The height of the frame varies from 1020 to 1400 mm. Thanks to the supports - legs - you can change the height of the structure. It is important to know that a low system does not always become a good solution, therefore, any frame structure must be buried 200 mm into the base.

The width of the truss reaches 500 mm.The depth of installation of the frame can vary from 150 to 300 mm. The distance from the base to the middle of the sewer pipe should be not less than 220 mm. Fixing the toilet have at a distance of 180 or 230 mm from each other. These indicators practically do not change regardless of the choice of the frame structure.

The block system is located at a height of 80 to 100 cm from the floor. It is usually deepened to 10 or 15 cm, depending on the dimensions of the structure. The blocks are fixed to the surface of the wall in the places specified by the manufacturer. As a rule, anchor bolts are screwed into each corner of the structure. Some samples differ in that they have an additional hole in the center.

The choice of a suspended toilet depends on the method of attachment and design ideas. A small device in length reaches about half a meter - this option is suitable for small spaces. Medium-sized appliances are 54-60 cm. This is the most common option and is suitable for medium-sized toilets. For large rooms, the master advises to purchase devices with a length of 70 cm.

The width of the toilet - from 300 to 400 mm. The bowl is raised to a height of 300-400 mm. When mounting the structure, it should be remembered that the gap from the edge of the device to the opposite wall should not be less than 60 cm.Between the toilet and the adjacent wall is kept a narrow strip of 10-25 cm. Lift the device from the floor should be 60 cm.

A system of any kind should not be located in the far corner of a spacious room. - devices must be located within walking distance. It is important not to create unnecessary problems with movement: no need to block the path to the instruments with furniture or mirrors. Around the toilet, you need to release 60 cm. If the dimensions of the room allow, you can install a bidet and urinal. When mounting each construction, one must take into account the height of the tallest household.

In the case of a frame device installation, the drain tank is installed in the upper part of the structure. In front of the device is a hole for connecting communications. A system of suitable pipes provides the flow of water and its discharge. Plumbing is connected to the plumbing through the side holes on the tank, which bring the adapter.This device is suitable for several sockets, which allows you to change its position as needed.

Inside the tank is a valve for supplying fluid or stopping its flow. The device provides flexible connection of the valve with the shut-off mechanism, which is presented in the form of float valves. In the cavity of the tank are also located mechanisms for adjusting the drain and devices to protect the system from excessive discharge of water. The drain is connected to an additional socket in the tank.

Suspension system works on the principle of the traditional version. Pressing the water release button at the base of the tank lifts the valve - the water leaves the tank and pours into the toilet bowl. The lever returns to its original position, and the valve is lowered under the pressure of water and its own weight. When the button is stationary, no water leaks. After closing the valve and emptying the tank, the automatic tank filling device is activated.

In an empty tank, the float is lowered, opening the valve. Through the formed hole water enters the tank. As the vessel is filled, the beacon rises.As soon as the float reaches the critical high point, the hole closes and the flow of water stops. Plumbing is at rest until the button is pressed, after which the cycle repeats.

Dual-mode tanks work similarly to a full drain system. A distinctive feature of such a system is the possibility of regulating the opening of the valve. Not all the water enters the bowl, but only a given part. Economical drainage reduces fluid consumption.

The traditional toilet device and installation are prone to breakage. The most common problem is tank failure. Heavy water clogs the valves of the tank and reduces the rate at which water enters the bowl. The filter cake in the inlet valve causes the liquid to take more time to fill the tank. To return the system to a working state, it is necessary to dismantle the tank and clean the valves.

Filters have a mesh structure. Over time, the cells fill the fractions resulting from the interaction of the mechanism with heavy water. Clean such a device with a soft brush.For these purposes it is not necessary to purchase a special device - you can use a toothbrush. Rinse the filter recommended several times.

Failure of the valve at the inlet to the tank will reduce the intensity of the flow of water into the tank. In some cases, the lid may simply twist. The valve position can be adjusted by applying pressure to a suitable metal lever. The connection of the float to the valve is often broken - such a system does not work smoothly. The valve opening must be flushed, adjust the position of the float and cover.

A rubber gasket is attached to one side of the valve. It can accumulate dirt, which negatively affects the circulation of water. To detach the rubber and flush it, it is necessary to loosen the valve mount.

The device is not recommended to be completely disassembled, since the design collection scheme is rather complicated. The remote gasket is cleaned, the valve is washed. Then the system is assembled, after which the installation can be put into operation.

Disruption of the connection between the valves and the button leads to structural failure. In this case, the button will not start the system - water will not drain.Breakage occurs when a valve is malfunctioning. To eliminate the problem, it is necessary to completely dismantle the system and replace it with a new device. Appliance suppliers can assist with the installation of spare parts.

If water flows into the bowl without stopping, but in a small stream, the rubber gasket on the drain valve must be replaced. Old rubber is unable to hermetically plug the hole, so there is a leak. During prolonged operation, the valve cap may be deformed, which can also cause fluid to pass through. To repair damage, it is necessary to replace not only the gasket, but also the valve mechanism.

An emergency tube designed to eliminate excess fluid may fall over time. Changing the design will cause leakage. Uncontrolled descent of water - a signal to fix the inlet valve and float.

There are several solutions to this problem. First, you can pick up the phone. Secondly, with the help of screws, it is possible to lower the float. These measures will significantly lower the level of fluid in the tank and normalize the system.

Most leaks can be eliminated by replacing the rubber gasket. Some modern models of polymer tanks do not provide for a gasket device — the inlet valve is a monolithic structure. To eliminate leaks in such a device, it is necessary to completely replace the valves.

In the modern market, you can purchase a complete set of all the necessary installation equipment for installation. Spare parts are also sold separately if the need arises to partially replace structural elements.

The complete set of frame installation represents the steel case. To install the system in the set get clamps and adjustable fasteners. Valves and pipes for water supply, drainage systems and hoses can be purchased separately. It is important to ensure that all components can be connected without gaps.

Frame systems are distinguished by a wide range of design solutions for installations — for example, you can purchase a model with an angular pattern. Before purchasing the installation, it is important to measure the location of the future construction - the dimensions of the module should be commensurate with the dimensions of the toilet bowl. Mounts need to choose reliable. The ideal system can withstand loads of up to 400 kg.

When purchasing an installation, you must purchase the following tools:

• perforator - necessary for mounting the system to the partition;
• set of ring keys - must match the size of the fasteners;
• construction level and tape measure;
• drills with a suitable diameter for installation.

The speed and quality of work depends on the right choice of tools.

Corrugation - a pipe with carved walls; it is necessary if the toilet bowl is installed with the bowl displaced from the axis. It helps to establish the connection of the device with a non-standard type of release. The walls of such a pipe are movable, so they can take any form without cracks on the surface. However, the wall thickness is small - the design does not withstand the aggressive effects of the external environment.

Also, with the help of a ribbed pipe, the toilet bowl is connected to the sewage system: a small section of the corrugated pipe is connected to the ceramic device through a branch pipe at one end, and the opposite end of the tube is inserted into the drain pipe. Plastic gaskets are installed at the pipe joints to prevent leakage.

Corrugation must be hidden from the eyes, as it has a very unaesthetic appearance, thin walls can be translucent. The design is built into the wall and covered with sheets of drywall. Such a pipe requires frequent inspections - weak walls often leak, which can negatively affect the installation work. Masters recommend installing a special box around the system.

The water supply is connected to the tank from above or on the sides. The scheme of connecting the installation to the central system must be made in advance. It is important to use as few pipes as possible. Experts advise not to use thin plastic pipes with flexible walls to connect the water supply system to the drain tank - these components can not withstand the internal pressure.

In the market of building structures, devices of various configurations and installation methods can be purchased. Each company is responsible for the quality of the goods and can confirm the reliability of the installation certificate. The sites have a rating of the best brands, and reviews are written for each model.

Company Cersanit - Polish company, producing machinery since 1998. The installations of this company are distinguished by a good bundle - the kits have everything you need for quick installation of the structure. They include a toilet with a dual-mode sink button. In addition, each model is equipped with a seat and a circle. Frame systems of this company have small dimensions, allowing to place it in any niche.

Buyers will be attracted by low price and ease of installation. As disadvantages can be identified a small number of threads on the mounts. The control panel of this system wears out quickly and sometimes blocks the flow of water. The system may require the purchase of additional fasteners. Some customers note that the shape of the seat does not always match the shape of the bowl.

German corporation Grohe operating in the market since 1936.It is famous for the production of sturdy fittings. Structures of this company are being bought not only for furnishing apartments, but also for installation in the premises of construction companies and shopping centers. Installations differ in wide possibilities in installation. Sewerage can be supplied from any point of the tank, which greatly facilitates the connection of the installation with the water supply system.

A continuous drain device is great for quick bowl cleaning. The tank is equipped with a gasket that serves to reduce the noise of water - thanks to this device, the set and the descent of the liquid is carried out almost silently. The design is equipped with an insulating coating - excess moisture does not accumulate on the surface of the tank and does not destroy the surface.

Chrome control panel. Customers notice that the coating peels off over time and requires additional staining. To hold this event is not always possible. A maintenance window is installed on the tank - its dimensions are rather small, which makes it difficult to control the water supply. Included with the installation is a decorative panel.

Geberit - a company from Switzerland. The company has 17 branches worldwide.Installations of this manufacturer are suitable for people of large stature. Structural elements are made of reinforced profile. The fasteners of the toilet bowl are equipped with additional inserts that help fix ceramics. Legs are pollinated with zinc to protect them from corrosion and increase service life.

Additional water supply pipes are included in the kit. Frames can be mounted both on the supporting wall and on temporary partitions. Designs are usually painted. The company gives a guarantee of its devices for about 10 years. The drain tank has no seams, therefore the risk of scaling on the inner surface of the tank is minimized.

The frame height reaches 112 cm, so this design is only suitable for devices in a room with high ceilings. The choice of buttons on the dashboards, as a rule, is small. As a significant drawback of the structures, it is possible to note the difficulty in repairing, since monolithic tanks are difficult to disassemble and quickly repair the leakage.

Bulgarian company Vidima different affordable price. In Russia, the products of this company are in special demand, as they are distinguished by low cost and high quality.The company mainly manufactures devices for residential installation. Unusual design execution gives the room a zest. Easy to install and use attracts beginners.

Another company with equally affordable installations - AlcaPlast. Czech craftsmen create frame and block designs, characterized by small dimensions.

Products of such a company is suitable for installation in small bathrooms and will save space. Models do not attach to the floor - the design is completely suspended. For this reason, the entire load from the devices takes on the wall. The installation can not be mounted on light walls.

The lack of communication with the floor allows you to install the toilet at any height. It is important to understand that the lightweight design is not able to withstand excessive load. Such systems are suitable for people who want to save money and time.

The competent choice of installation in many respects depends on the location.

There are several types of fastening structures, each of which requires a special approach /

• Standard location. The seat and drain tank are fixed in the middle of the wall.This option is suitable for the design of any company and does not require detailed preliminary measurements.
• Under window. The frame of this design should be low. The optimum fastener height is no more than 82 cm.

• Placing in the corner. This modern design requires the acquisition of special fasteners. There are modules that repeat the shape of the pairing walls. The cost of this design will be more expensive.
• Partitions on both sides. Suspension system can not be installed without knowledge of the exact dimensions of the walls. It is not always possible to correct errors with this arrangement of devices.
• Line installation - This is an interesting solution for those who want to combine the toilet, bidet and sink. The system helps to correctly manage the space of the room and ensure an unhindered approach to each device. Nearby you can arrange a closet for storing towels or household supplies.

But if the bowl was purchased in advance, it is important to choose the right frame. Installation fasteners must coincide with the toilet openings. It is possible to adjust the lifting height of the suspension device using a movable frame.Special attention should be paid to the coating structure.

The armature is often painted - this measure is necessary to protect the device from corrosion. Powder coating forms a film characterized by durability. Analogs are quickly removed from a metal surface, and the reliability of the powder was checked by masters repeatedly.

When choosing an installation, it is necessary to pay attention to the strength of the structure. The system must be fixed, because any deviation can lead to serious violations in the process of operation. The pipes should not sag, and the connecting seams should be securely fixed. On the surface of the reinforcement should not be cracks, scratches, chipped paint. It is better to give preference to the system with minimal bending of pipes.

Modern solution from the company Geberit - hanging toilet with a monoblock. This design does not require an additional frame device and complex conduit. The installation is not mounted in the wall, since all the necessary elements are already located in the toilet bowl. The design of the bowl fits the high-tech interior. The main disadvantage of the design is the high cost: the price for such a toilet starts from 50 thousand rubles.

The “normal” cost of installation varies in the region of 11-15 thousand rubles. Such sets are fully equipped with all necessary elements. Cheaper analogues can be made from low-quality materials. Reduced wear resistance shortens the life of the structure. Cheap metal frame can not withstand the load from the pipe and bend - this design will require immediate replacement.

Masters advise to give preference to exceptionally high-quality materials, since such an installation will last a long time, and partial leaks can be easily eliminated. Overhaul will not be needed for many years, and the dismantling of some components will not require large investments.

Installation of the installation begins with a rough work. The water pipe must be brought to the place of the future drain tank device in advance, and the sewage drainage should be parallel. The diameter of the pipe section can reach 110 mm. According to this characteristic, the dimensions of the installation pipes are selected.

The frame is set according to a preliminary plan and pencil marks. Do not be afraid to draw on the wall - the design will be hidden under a layer of drywall.The armature is attached with special pins and securely fixed. The scheme drawn up in advance must correspond to the contour of the structure obtained. To align the system using the construction level.

First, the frame is set to a small height. Then the installation is carefully lifted - the normalized height of the structure is 42-47 cm from the floor surface. The toilet is attached with temporary pins. After that, it is necessary to mount the structure into the wall with fasteners and screws. Dowels are usually included in the set. Experts advise buying mounts with a margin.

Then it is necessary to make a supply pipe installation to existing communications. The pipe must be strong - flexible counterparts do not withstand pressure and break. Avoid a large number of joints. Each seam must be reinforced with plastic mounts and windings. During operation, the valve cannot be opened in the drain cavity.

After the joints and the connection of the toilet bowl and the cistern with the water supply system and the drainage of the sewage system are strengthened, the system must be tested: water is supplied and the tank is being monitored. As soon as the float reaches the top point, the water must be drained.Properly folded bathroom should work without leaks and unnecessary sounds. After multiple tests, you can perform the lining.

The master advises to use plasterboard blocks as cladding. The material must have a high moisture resistance. According to the preliminary marking, the slots are made in such a way that the sanitary devices are covered with a coating on all sides. Some manufacturers print the contour of the bowl on the panels, which facilitates the workflow.

On the lid of the drain tank install restrictive cuff of polymers and a cover for protection - these devices prevent the ingress of dirt into the tank, the lid also plays the role of insurance. After finishing, it is necessary to wait at least 10 days - during this time the glue will dry out and a strong shell will be formed, due to which the tile will not crack during operation.

The hanging bowl of the toilet bowl is fixed after hardening of the topcoat. Installing this device does not require much effort - just pick up such pipes so that there is no water leakage. Two nozzles are brought from the installation to the ceramic device: the first one drains the water, and the second connects the construction to the central sewage system.

The fixing pins, on which the bowl was pre-fitted and the drain was controlled, should be exposed from the plane of the lined wall. Before installing the bowl, you must lay a cushioning layer and wrap the studs with PVC couplings. Then the bowl and pipes are installed on the pins and fastened with nuts. After fixing the device, it is necessary to carry out several experiments with the drain.

The dashboard is mounted at the last moment. The buttons of each design have their own specifics. For its proper installation is required to familiarize yourself with the manufacturer's instructions - it should be easy to press.

Installation of all devices is considered to be performed correctly only in the case when the device does not have leakage. The design should not sink under the weight of a person. Drain buttons should carry out a smooth descent of water, and the frame or block system - securely hidden under the panels.

If we talk about the advantages of a suspended structure, it is necessary to highlight some aspects.

• Compactness. Plumbing appliances are relatively small. All dimensional parts are securely equipped and hidden.The design occupies a small area due to the reduction of coils of pipes. The built-in tank is not suspended from the ceiling, it does not create excessive load.

• High-quality fittings. Manufacturing companies are trying to produce reliable designs that can be used for many years. Any external or structural deviations of parts are unacceptable, because after installation it is almost impossible to make any changes to the system.
• Economical water consumption. Thanks to the dual mode, the flow rate can be controlled. Suspended structures have a high discharge pressure, so they consume less water.
• Noise reduction. The enclosing plastic construction and rubber gaskets isolate the flush tank from the apartment owners - it will no longer be heard as water flows through the pipes. Such a device will make the bathroom more comfortable.

• Easy to clean and use. Since the pipe system is hidden, it will not accumulate dust and dirt. There is no need to clean up complex communications. Suspended toilet facilitates the process of washing floors.

The most important disadvantage of the installation may be its high cost.Buying additional fasteners, amplifiers and struts does not significantly increase the total amount. Also, this design requires time-consuming: it is necessary to carry out a lot of measurements, to carefully select every detail of the design, it is also worth paying more attention to tests and experiments.

Additionally, it is worth noting the inability to carry out repairs without dismantling the partitions - in case of breakage of monolithic structures, it will be necessary to completely replace all components.

Another disadvantage may be that the suspension device will not be appropriate with every interior. Designers recommend decorating such bathrooms in the style of minimalism or high-tech. Simple shapes and clarity of lines will suit the classics, but for a romantic style this solution does not always look successful.

To have a complete understanding of the use of the installation in the interior, you can familiarize yourself with the following design solutions.

Simplicity and reliability.In this interior, the installation allows you to place the toilet near the bath. A small and neat item does not spoil the interior. The absence of a drain tank allows you to install a window in the wall and place a flowerpots with flowers.

A wooden shelf in place of pipes not only hides communications from the eyes, but also adds coziness to the room. Brown shades can be traced throughout the interior. Green colors create bright accents, filling the room with colors.

Heavenly motives. The main task of the designers of this bathroom was to create an atmosphere of lightness. Suspended structures greatly facilitate the task of arranging the space. The linear arrangement of devices helps to save space. The lack of communication structures with the floor creates the illusion of weightlessness - the room is filled with air and light.

The blue frames repeat the outlines of the instruments, creating a certain heavenly aura. Such a frame is not just a design move. The crossbars reinforce the wall to which the frame is fixed. Externally, these subtleties completely unnoticed.

Cabinet wall. The frame is fixed on the floor, so it allows you to install the toilet not only on the wall.In this interior, the sanitary device is mounted in the cabinet - this design allows you to efficiently manage the entire space of the small-sized room. The advantage of the wall-cabinet is the possibility of placing objects on both sides of the structure.

The Scandinavian combination of wood panels and gray colors creates an atmosphere of warmth and comfort. Smooth lines give the room finesse, and dark green spots add to the room with bright colors. Due to the low location of the frame cabinet serves as a table.

Space saving. Installation for the toilet becomes a real salvation in small spaces, as it does not interfere with the approach to the shower, and the lack of a cistern allows you to place a zigzag towel dryer. The white tile of a toilet bowl is well combined with wooden panels of a floor and walls.

White panels add light and space to the room, and tile visually expands the area of ​​the room, creating harmony. Illumination is reflected from the lacquer surfaces, filling the room with air.

Floral motifs. Purple color and decorative mosaic in perfect harmony with white tile.In such an interior, the installation is used both as a fastening of a toilet bowl and for installing a sink. Owners of the apartment can freely wash the floors.

A dark monochromatic wall visually lengthens the room, and light tile in combination with ceramic devices makes the room airy. "Soaring" elements of the interior complement the overall picture of lightness and airiness.

Installation installation Grohe toilet bowl, see the following video.