Dimensions of the frame for the installation of the toilet

We all use the plumbing. It can include a bath, toilet, sink, bidet, and sometimes more devices. Today we will talk about the toilet. Its dismantling can be associated with the replacement of pipes. The purchase of modern and easy-to-use plumbing devices today is not a problem, as the stores of the corresponding profile provide a wide selection of toilet bowls of various manufacturers made from a wide variety of materials. Consider the nuances of the frame for the installation of the toilet.

In today's market, the buyer’s attention has been offered a wide range of similar products. The types of installations that are used when installing a suspended toilet can be divided into 2 main types: frame and block. Consider the nuances of each.

To mount this view, you must make sure that the main wall will be used for its installation.

This design is characterized by:

• original reinforced flat plastic tank;
• fasteners;

This installation is built inside the wall entirely. It is best to have a niche in the wall. The main reasons for installing a block installation are free access to it and its relatively low price. The main drawback is the use of a capital wall for installation. In the absence of a capital wall, a block type is not recommended.

The design is implemented on a frame made of steel, equipped with fasteners, mandatory connections, water drainage systems and sewage connections.

• Types of installations can be divided according to the methods of fasteners.
• Frame attached to the wall at 4 points. Here you have to look for an attachment only on the main wall.
• Variety with special supports, installed on the floor covering.
• Frame, which is attached to the wall and floor covering for 2 attachments to each surface.

Separately distinguished frame types of corner installations. Today, to meet the needs of the buyer, trademarks produce options for installations that fasten to the walls as well as to the corner. This can make the exterior look attractive and will allow you to use the living space more efficiently. Of course, such constructions will cost more.

Some people think that the installation is how the drain tank is attached to the wall box. This opinion is wrong. The installation is a frame with fasteners, which makes it possible to strengthen the whole structure. For installation of a suspended toilet bowl more often use a wall. With a small room, it saves space. Using this method of mounting the installation, you can hide communications pipes, the toilet will look more aesthetic.

Choosing plumbing, experts advise to pay attention to its coverage. Powder coating is the best option, as it helps to create the best protective film on the metal surface.

The frame must be equipped with fasteners:

• the suspension of the toilet;
• fasteners for installation of water and sewer pipes;

Differences between the size and shape of the bowls of suspended and floor toilets are minimal.

Standard dimensions are in:

• length - 550-650 mm;
• width - 350-450 mm;
• height / depth - 310-410 mm.

Such dimensions are considered to be optimally comfortable when used. They are most adapted anatomically. To create exclusive and custom-made interiors, designers often put comfort on the last place and deviate from these parameters, developing various options. Drain tanks for suspended toilet bowls are made of plastic with a thickness of 85-95 mm, width up to 500 mm. Different lengths are possible, depending on the height of installations.

The standard volume of waste tanks is 6-9l. In smaller tanks for a compact installation, it can be reduced to a volume of 3-5 liters. When installing the toilet, the parameters of the niches in the bathroom should be adapted to their dimensions in the drawing, if present. To avoid possible inaccuracies, you need to carefully measure everything before that. It may have happened that an overly narrow installation was acquired, then a niche size correction will be necessary.

The complete set of installations includes fasteners and the necessary instruction. Mounted mounting is carried out only on the main wall. As a rule, it is completed with fasteners. It is preferable to install the installation using anchor bolts. Installation of floor construction is more simple. When working it is necessary to check the strength of fasteners.

In another case, the toilet hangers are loosened, so the use will not be convenient or even dangerous. It is recommended to first check the sequence of operations, and only then begin work in accordance with the instructions and the plan. Choosing a suspended structure, you must carefully consider the overall size. Width and height vary between 350-450 mm. The free space between the front edge of the toilet and the wall should be 50–60 cm.

Installations of the block type are less than 1 m in height, 50–60 cm in width, 10–15 cm in depth. Frame-type installations are recessed no more than 30 cm (up to 150 mm with a non-standard installation). Indicators on the height level depend on the type of frame. It happens that in height they reach 140 cm or are minimal (up to 80 cm).

When choosing the type, size and shape of the toilet you need to know the standards of their norms and parameters. For small bathrooms it is preferable to install a smaller toilet. With the possession of a larger room there is the possibility of installing a full bathroom with the presence of a bidet, washbasin sink and children's toilet. When choosing a plumbing, it is necessary to focus on the growth characteristics of a taller family member.

One of the most famous manufacturers of sanitary products on the Russian market is Cersanit. If this product is not in stores, it is worth scrolling reviews about what is and make the right choice. When buying it is important to pay attention to the availability of relevant documentation. This is the guarantor of the acquisition of quality products.

It is possible that you will be sold an installation along with a toilet. However, it may be a separate device. To be sure that everything is the same, it is preferable to purchase both at the same time. If there is a bowl in the set, it will be necessary to examine the frame dimensions, to find the correspondence of the distances between the fixing points.

If the toilet was purchased not complete with the installation, you should pay attention to the presence or absence of free space in the bathroom. Sometimes when choosing plumbing based only on the quality of the material or the name of the brand. However, without taking into account the dimensions of the room where the installation will be installed, the user will experience discomfort during the operation of the equipment. We note some criteria that you must pay attention to when choosing, given the characteristics of the room.

The toilet can not block the front door to the room, it also should not interfere with the movement of visitors. For the most comfortable operation of such plumbing equipment, it is necessary to leave at least half a meter of free space between the front edge of the toilet bowl and the nearest object (wall, obstacle). In terms of height, toilets should be comfortable for use by each adult family member. If possible, it is better for the child to install a model of a children's toilet or use a special footrest.

Too wide or too narrow a toilet seat will bring uncomfortable sensations.Incorrect selection of parameters can have a strong effect on a person when using plumbing (up to a violation of the blood circulation of the lower extremities). Individual selection of the rim would be the best option. The constitution of man is very individual. For example, a slender man would be comfortable using a bezel of a different size than, say, a large woman.

When performing a high-quality installation installation on the wall or floor will have to obey the requirements.

These include the definition of the area of ​​assembly production, as well as the location of the reinforcement of the floor frames.

• After that, you need to fix the device.
• Then make a fixation on the wall.
• The next operation is the installation of the toilet itself.
• Then check the installation level.
• The last operation will be securing the lid of the toilet seat.

It is possible that the purpose of the fasteners is not entirely clear. To this you need to pay special attention. When installing, follow the location of the mounting lugs. When installing on the inner wall, this is essential. If the feet are placed incorrectly, the load is unevenly distributed.

This will further cause the deformation of the pier on which the toilet was mounted. Adjust the frame is necessary until the desired height can not be fixed. Finishing should begin only after installation. Toilet bowl attached to the finished wall.

There are only two types of toilet flush mechanisms:

• single-mode (water from the tank is removed completely);
• dual-mode (water remains, its volume varies).

It is preferable to install a dual-mode drain, since water saving is achieved. If you press the small button, 2-5 l will spill out, by pressing the big button - up to 7 l. Some models of toilet bowls allow self-adjusting the volume of water to drain. Installation must be reliable. Frame constructions are strongest, since in their manufacture they use built-in reinforcement of greater thickness. Because of this, its cost is higher. However, in order to increase the service life it is better to buy them.

Check the strength characteristics of the product. The deflection and reeling of the frame are unacceptable: this indicates the fragility of the structure. All weld seams should be done carefully, cracks and drips should not be present.Painted parts should be inspected for defects in the coating. They can cause rust.

Before you install the toilet in the bathroom of your apartment, you must carefully consider everything. When connecting the sewer pipes and plumbing to the plumbing with their own hands to connect the drain, the frame nozzles are connected to the sewage system with a knee or a corrugated pipe. Special attention should be paid to this area. Check the tightness of the clamp and the quality of the seal. The same applies to the junction of the cold water supply in the drain tank. All weaknesses can cause trouble, as it is problematic to eliminate the leak due to blocked access to it.

Frame installation can be installed even to a plasterboard wall. The installation procedure is a process that is performed prior to the finishing of the floors. It is carried out at the time when partitions are constructed. In another case, they are mounted in a niche. It is necessary to be sure that all the details have been selected correctly, since it will not be possible to make any changes during installation, and even more so after it.The whole installation will be closed by facing, access to it will be closed.

If it is necessary to repair, you will have to remove the finish or some part of it. To carry out such an operation, you will need to spend extra money to acquire the necessary materials. This will take extra time. Installing a floor system and installation means reducing the usable area. Independent installation of a suspended toilet installation is theoretically possible, but it will require careful fulfillment of all instructions requirements. As a result, it is quite possible to obtain a user-friendly product.

About what are the sizes of frames for the installation of the toilet, see the following video.