Built-in toilets - decoration bathroom

Installing a toilet in the bathroom - the most time-consuming repair process. Installation is complicated due to the small size of the room. Many problems can be avoided by installing a built-in toilet. Built-in toilets - it's easy installation and a real decoration of the bathroom.

There are such advantages of the device:

• Wall mounted toilet looks stylish and beautiful. The flushing tank and the sewer connections are mounted behind the wall of the toilet room, which improves the look of the room.

• Another important advantage of the model is its compactness. You can easily pick up the toilet of the required shape and size.

• Cleaning the toilet will be much easier and faster, because this will disappear all hard-to-reach places.

• You can easily lay out the floor tiles with a decorative pattern right under the toilet.The tile will keep the unique drawing, it should not be cut.

• You will easily install the "warm floor" system, which is very convenient when combined bathroom.

• A wall mounted conventional toilet is easily height adjustable, and some installation systems allow it to be mounted even in the corner.

• Thanks to a special metal frame installation allows not to resort to the help of professionals.

One of the main disadvantages of this model is the high cost compared to the toilet toilets. When choosing this product, you will not regret the finances spent, they are worth it. The second drawback is the difficulty of repairing and troubleshooting. This problem is easily solved when installing an additional door in the wall of the bathroom.

The device, which is called the built-in toilet, can be made of various materials.

• Porcelain - the high-quality grade of ceramics having pure white color. A pattern can be applied to porcelain toilet bowls, which gives the product a special refinement. Porcelain models are more expensive.Porcelain sinks have a more dense structure, less dirty and do not turn yellow with long-term use. They can complement any design and look good in various interiors. Reviews of this material is mostly positive.

• Faience - a cheaper grade of ceramics compared to porcelain. The disadvantages of faience toilets can be attributed to a large wall thickness with low strength, faience products lose their whiteness over time. Faience does not withstand high temperature and may crack. Earthenware and porcelain plumbing from above is treated with a chemical solution - glaze. The outer coating gives them a similarity, and it is almost impossible to distinguish between new products. Firms producing plumbing, specify the material of manufacture. Independently distinguish porcelain from faience can be resorted to the following tricks. Products made of porcelain with a slight tapping emit a ringing and drawn out rumble, and the faience sounds more booming and short.

• Toilets stainless steel set in common areas. They are practically not amenable to any impacts, do not lose their color and properties during sanitation.Such models are not popular in apartments.

• Glass toilet bowls require careful maintenance and are expensive.

• Natural and artificial stone. From these materials make expensive models for individual orders. They have a sophisticated appearance and not always a standard form. For these purposes, marble, white and green onyx, black and gray granite, travertine are used. The most expensive models are made from natural onyx.

Built-in toilets are fixed on the wall with a special frame construction - installation. Installation of a bathroom with the installation will not cause problems. If you are not confident in your abilities, you can always call an experienced plumber. After repair, all fittings are behind a plasterboard or tiled partition. The button to drain the water is displayed in a special door - hatch, which is mounted on the wall.

There are several types of installations.

• Frame. The kit includes a metal frame with fastening system and a drain tank. It can be mounted on several points: both to the wall and to the floor. Installation of installation is possible only to the floor.

• Block. If you install a toilet before repairing in the toilet, feel free to buy a block installation. It is cheaper and more reliable than the frame installation, as it is attached to the main wall. The main advantage of the model is that it already has a drain tank.

Before installation, special attention should be paid to the reliability of sewage joints. After repairs in the toilet access to some communications will be limited. As they say, it is easier to prevent a problem than to solve it. Be sure to replace the old metal riser with a plastic one. Visually inspect all pipe joints. It is very important that the sewage system does not drip or leak.

If sewage is leaking, seal all joints with silicone sealant. Approach this process especially carefully. If possible, treat all joints with sandpaper, then degrease with alcohol or solvent. Try to evenly distribute the silicone over the entire diameter of the nozzle.

After sealing, you should wait a day until the silicone has completely set, and then proceed to the next stage of installation. Even after the sealant has dried, it is impossible to twist and move the nozzles.With a strong sewer leak it is better to replace the pipes or individual flanges.

Sometimes when buying an installation, there may be a problem due to the short length of the pipes. It is better not to increase the length of the part with home-made devices, but to buy a pipe from another manufacturer. The diameter of the installation nozzles is 90 mm; they are inserted through a rubber adapter into a sewer hole with a diameter of 110 mm.

This design can be mounted directly to the floor without resorting to the main walls. A block installation must be attached to the main wall. When choosing a model, do not forget this rule.

Installation of frame installation should be carried out according to a specific scheme.

• According to the instructions going frame. The width of the frame depends on the manufacturer, but all of them are suitable for any toilet bowl.

• Installing a drain tank. The hole for water intake in the drain tank can be bottom or side. Connect the tank to the water supply. For liner it is better to use plastic pipes, they are much safer and more durable than rubber hoses.

• Installation of the assembled installation. Screw the frame to the floor.Using the retractable legs, adjust the height of the frame; do not forget to align the frame horizontally with a level.

• Connect the toilet drain with sewer. To do this, you can use plastic corrugation. Treat all joints with sealant as described above. After waiting for the right time required for the sealant to set, then let the water in and check the tightness of all joints.

• The toilet is put on metal studs in the installation and is attracted by nuts.

• The framework under moisture resistant gypsum cardboard from metal profiles becomes. The installation is closed by plasterboard from the front and top. You will have a closed box with a convenient shelf on top. Skilled craftsmen continue the section from the shelves to the ceiling, it turns out very comfortable wardrobe.

• Cut the technological hole in the drywall under the door for servicing the flush tank.

• Depending on the desires of the owner, the drywall is tiled or puttied.

Block installation is installed only on solid capital walls. For installation in a private house, this design may not be suitable.

The installation procedure is as follows:

• Measurements are taken to install the structure mounts.

• Anchors are inserted into the holes drilled by the perforator, the main frame is fixed.

• The system is aligned horizontally and vertically.

• The tank is attached to the main frame with the help of parts included in the installation kit.

• The system is connected to the sewer. The toilet bowl drain is inserted into the sewer outlet, pre-joints are processed with silicone. The tank is connected to the system using a plastic pipe.

• The toilet bowl is mounted on pins and the system is fastened with nuts.

• After the sealant has dried, the system is checked for leaks.

• Next, the false wall is made of moisture-resistant drywall, as described above.

As can be seen from this manual, installation of a block and frame installation is not much different. Reliable companies producing plumbing provide a guarantee for a ten-year service life of their products, as well as all components, gaskets, gaskets and tank.

The following companies have recommended themselves in the plumbing market: Grohe, Geberit, Roca, Vitra, Cersanit, Laufen. Some models are not available to every buyer because of the high cost.

Swiss company Geberit produces luxury models.Her toilets are equipped with a sensory sink, water heater.

Toilets in the style of high-tech preferred by the Spanish company Roca. In its model range there are round and square bowls.

High-quality economy class bathroom fixtures produced by a Turkish company Vitra. Prices for this plumbing are quite affordable: from 5 to 10 thousand rubles. There are expensive models.

Products from faience offers Polish company Cersanit. Polish toilets are designed for the budget buyer himself. Custom sizes are not available from this manufacturer.

Austrian company Laufen produces models mainly from faience. There is a diverse range: drop-shaped, classic and even pyramid-shaped toilet bowls. Price plumbing ranges from 5 to 25 thousand rubles.

About the intricacies and secrets of installation installation described in the video.