Types and device Ariston water heaters of 50 liters

Today, Ariston water heaters are among the most sought-after water heaters on the market. In particular, models for 50 liters have gained particularly high demand. Such water heaters have small dimensions, so they can easily fit in any room. Ariston water heaters are easy to use, maintain and have a long service life.

Ariston heater is able to heat water from +30 to +85 degrees. An interesting feature of this product is that such a water heater has an extremely pleasant and comfortable design that can fit into any room, and constantly provides the house with hot water. In many models, the function of saving electricity is also installed - the water is automatically heated to a temperature of +50 degrees. Of course, if you wish, you can increase this figure.As well as Ariston 50 liters boilers can be automatically shut off when a surge of electricity occurs, which helps prevent unit breakdowns. In modern models, it is worth noting the functions of accelerated heating and water filtration.

Among the main models of water heaters from Ariston are several types.

• Water heaters of accumulative type. Two tubes and power supply are connected to storage heaters. The first tube is intended for the entry of cold water into the boiler. After its heating, it goes through the second tube. Usually 50 l models are mounted - mounted to the wall. Water in these types of boilers is heated by electricity. Thanks to the thermostat, the cumulative electric boiler automatically shuts off after heating the liquid to the desired temperature. Users have noted Ariston VLS storage boilers, which, among other things, are flat. They are extremely compact, so do not take up much space.

• Boilers of gas type. Gas models are distinguished by the fact that water is not heated by electricity, but by gas.The rest of the device and the principle of operation is similar to storage type water heaters. It should be noted that the gas boiler is usually steel and is additionally covered with a layer of titanium enamel, which allows both to increase the reliability of the water heater and reduce heat loss.

• Indirect water heaters. They carry out heating of water by means of the coil installed inside. It is noted that these models heat the water faster than all previous ones. But usually they are quite large and have a lot of weight, but they are able to heat a large amount of water (150–500 liters). Such volumetric models are not recommended to be fixed to the wall, but placed on the floor. Outdoor water heater has a very durable coating, which increases its service life.

Among other types of Ariston boilers it is worth noting flat machines. These compact models are minimal in size and can be placed anywhere. Despite their small size, such boilers are quite powerful. This option fits perfectly into the premises of any area and does not take up much space. As well as the manufacturer offers customers a rather unusual boilers, which can be arranged horizontally.Horizontal models can be placed in a dedicated niche, thereby completely hide it, which allows for even greater savings in usable space.

It is necessary to highlight a few of the most common models of Ariston boilers.

• Ariston Velis Inox. This model has horizontal and vertical variations. The stylish design and flat body make the boiler a rather attractive technical device that does not take up extra space.

• Ariston ABS VLS. This option is almost completely automatic. The apparatus has various systems that monitor the temperature and protect the heating elements from overheating.

• Ariston ABS PRO. This type of water heater is cylindrical in shape, which allows it to be placed in the corner of a room. This version of the boiler is one of the most budget.

Usually installation and connection of Ariston 50 liters boilers does not cause great difficulties. The operating instructions are attached to each device. Therefore, the installation of the boiler - it is a simple affair and doable with your own hands.

Install the hinged boiler as follows:

• measurements should be made on the wall, including determining the height of the unit;
• then a punch should be made a couple of holes, which in depth should be about 10 cm;
• for mounting the boiler, strong anchors are used that can support a large weight of the structure;
• then the boiler is simply hung on the anchor with a special mounting plate, which is located behind the body.

One of the main points when installing a boiler is to properly connect and carry out the first launch of the device, using rules such as:

• first you need to open the valve to supply cold water to the boiler;
• then open the mixer, from which hot water should flow; most likely, when you first start it will produce loud and intermittent sounds, but do not be afraid - this is normal for the first start;
• then it is necessary to wait a little while the boiler makes a set of cold water to heat it;
• after filling the boiler and heating the liquid, the water from the tap should flow stably; it is desirable not to expose a large temperature regime immediately;
• after the first start, the water temperature can be easily adjusted using simple commands on the water heater.

Even the most reliable equipment is not insured against accidental damage. Whatever high performance the device has, it can still fail. Various factors may influence this. For water heaters usually characterized by breakage of the elements of water heating and thermostats. In order to avoid breakdowns of heating elements, it is recommended that at least once a year, the prevention and cleaning of heating elements be carried out. As an indicator of malfunction can be a long period of water heating, extraneous sounds when the boiler is working or more private spontaneous shutdowns. Repair of the boiler can be made independently; This requires disassembling the unit and determining the location of the breakdown.

In order to eliminate the malfunction with your own hands, it is necessary to follow certain steps.

• To begin with, it is necessary to disconnect the device from the mains and then completely drain the water from it. To do this, you can use a hose that connects to a special hole for water discharge.
• It is necessary to block the flow of fluid into the boiler. After draining the water, you can proceed to inspect the parts of the water heater.
• Often breakdowns occur precisely at electric heaters, so you should immediately inspect the heater (heater).
• With prolonged use of any heating element is scaled. Therefore, it should be carefully removed, while you can use special tools.
• If it is necessary to replace any components, then it is necessary to purchase only original parts by contacting the official manufacturer.

In some cases, the tank of the water heater may leak. In this case, you need to carefully inspect the body of the product. It is possible that the problem lies in a leaky gasket, which is simply replaced by a new one. But if the heater tank is leaking due to a crack or chipping, then it is unlikely that it will be possible to eliminate this malfunction by independent forces. You can try to use the soldering method, but this is unlikely to help for a long time. In case of damage to the housing, corrosion in the heater begins to occur faster, and the heat loss begins to increase.

After analyzing customer reviews on the use of Ariston boilers, it should be noted that most of the owners are satisfied with the purchase, because the work of such a water heater does not cause serious complaints. Buyers appreciate the stylish appearance, compactness and simplicity in managing the water heater. Also, low heat loss and low power consumption during boiler operation were separately noted. In general, owners of Ariston boilers noted good value for money and professional service in specialized services.

As negative points, periodic failures of the water-heating element were noted. Usually the manufacturer Ariston gives a guarantee for heating elements up to one year. Some owners of boilers breakage occurred before. But the performance of this element depends on many factors - the frequency of use, water hardness and others. And also among the negative aspects, it is worth noting the lack of complete elements for fixing some wall-mounted boilers. These brackets must be purchased separately.

As a recommendation, it is worth noting that if the water heater is not used for some time, then the water should be drained from it. With a long stay of water inside the apparatus, it begins to oxidize, which negatively affects the details of the product. And also it is not recommended to constantly turn off and turn on the heater, because of this automatic systems become unusable.

At installation of a water heater it is worth remembering also about safety measures, namely:

• the outlet to which the boiler is connected must have ground terminals and also it must be reliably protected from moisture;
• in the care of the water heater is not recommended to use detergent chemicals; just wipe the surface with a wet soft sponge or wet it in a soapy solution;
• if there is a water filter in the boiler, it is necessary to check it periodically and, if necessary, replace it.

So, modern water heaters manufacturer Ariston are among the most popular on the market. These devices advantageously combine high quality, unpretentiousness in installation and maintenance, long shelf life, cost effectiveness, pleasant design and reasonable price.The owners of these boilers have appreciated Ariston water heaters and are extremely pleased with their work.

See how to install the Ariston water heater in the next video.