Installation of the installation of the suspended toilet Alcaplast

Toilets of the suspended type Alcaplast have many advantages: they save free space, look original, besides it is an excellent option for a small-sized bath. However, the installation of the installation of plumbing should be carried out according to the established scheme - depends on the success and duration of the equipment.

The most economical and affordable option is the installation of Alcaplast. Due to its compactness, it is able to fit organically into any small area. This is a frame system that is placed on a foundation or floor, after which it is securely fastened to the base and wall.

By adjusting the height with the legs, the design can be fixed anywhere (there is also a corner option). In addition, it corresponds to, in fact, all modern models of toilet bowls. In this case, it is recommended to have sanitary ware next to the bearing wall. The floor must have a screed thickness of 200 mm.

The main advantages of products from the Czech Republic:

• saving space in the toilet room;
• hygiene (due to the convenience of cleaning under the hinged model);
• installation at optimum height;
• high quality parts;
• nice appearance (due to the fact that communications are hidden).

Of the minuses emit: the need to dismantle the replacement, rather complicated installation process.

When purchasing products from this manufacturer, there is always the possibility of connecting additional plumbing: next to the toilet, you can install a bidet or a hygienic shower with a mixer, because the design provides adapters for connecting other water sources. If the frame has a connector under the outlet, it allows you to install a bidet with electronic control.

Installation Alcaplast is a budget, lightweight and compact model that can be purchased with a toilet.

Included from the manufacturer are the following items:

• installation system;
• plasterboard for sound insulation;
• elegant and hygienic console toilet without rim;
• seats with lift device for smooth lowering;
• white button.

The system is supplemented with a two-stage drain mode (large and small). Products are guaranteed for up to 5 years of use.

Other Alca products, such as the A100 / 1000 Alcamodul, are available with no floor mounts. In such cases, the entire load, both of the structure and of the person, falls on the wall; therefore, brickwork or a partition of at least 200 mm is preferable.

During the installation, you will need tools such as a level, a construction knife, captive keys and for a threaded connection, a measuring tape.

Also for the work must be prepared elements of the structure:

• frame installation;
• toilet;
• nozzles of different sizes;
• double flush key;
• mounting studs.

All work is carried out according to the established scheme.

• First you need to create a niche in which the frame will be placed. It is made in the bearing wall and provides a load of up to 400 kg. The size of the niche is 1000x600 mm, its depth can vary from 150 to 200 mm.
• At the second stage, the sewerage system is brought to the location of the hidden system. A pipe with a diameter of 100 mm is placed as close to the floor as possible under a proper slope. At its horizontal part put steel oblique outlet. The connection point should be located at a distance of 250 mm from the center of the niche.
• Next, mount the frame, fixing its legs on the floor, it is fixed to the wall using brackets. It is extremely important to check the evenness of the structure location with a level, as distortions can affect the operation of the internal device, and this will lead to system malfunctions and breakdowns.

• It is advisable to make a screed legs cement solution with a layer of 15-20 cm for stability. In order to hang the plumbing, in the lower part of the construction there are special holes. Between them and the floor surface maintain a distance of 400 mm. Through this perforation, the mounting needles are inserted and fixed in the wall with nuts - onIn the future, they hang a toilet bowl.
• The last connection to the sewer pipes. A special tap in the installation system is connected to the communications by one side, and the other is tightly fixed to the frame, for which purpose a threaded connection and sealing gaskets are used to prevent leakage. It is also recommended to bring polypropylene or copper pipes to the tank, which are much more practical and durable than flexible hoses.

After that, conduct tests on the performance of the system and possible leakage. It is necessary to open the tap located inside the barrel, and as it is filled, to identify the presence or absence of problems. If no errors are detected, the installation button is installed: pneumatic or mechanical. Pneumatic key is attached using special tubes. The mechanical type model is installed after mounting the pins and adjusting their position. Both operations do not cause much difficulty, since there is a hole and the corresponding connections.

On how to install the installation for a suspended toilet, see the following video.