Filter "Geyser Nanotek": features, advantages and installation rules

There are a huge number of filter models on the market, but not all of them can really trust such delicate work as drinking water purification. To a full extent, this task is handled by installations of leading manufacturers. It is worth considering in more detail one of such models - the filter for reverse osmosis water “Geyser Nanotek”.

Consumers rate the “Geyser Nanotek” system quite high. Judging by their opinions, it gives impeccably clean water, characterized by a pleasant taste. At the same time, the flow rate of the device is high and covers the needs of 4 or 5 people with a guarantee. It should be borne in mind that with a pressure of less than 3 atm the filter will be idle forcedly. "Geyser-Nanotek" is mounted under the sink.The water that has passed through all five stages of purification is discharged into a separate tap.

As the instruction indicates, the system will be able to perform the following actions:

• remove chlorine;
• reduce the concentration of iron;
• get rid of excessive rigidity.

Ultrafiltration and activated carbon cleaning help achieve these goals. This solution allows you to simultaneously get rid of hazardous components and not reduce the presence of useful substances. If the filter is operated correctly and the cartridges are replaced in the allotted time according to the standards, you can get clean and tasty water for quite a long time. But nevertheless it is necessary to study the device in more detail and deeply.

“Geyser-Nanotek” is made in the size of 470x430x420 mm. And this means that even in a small kitchen there is a place for him. The standard delivery includes a tap and a water-accumulating tank. When a pressure of 3 atm or more is reached, 0.14 l of water is cleaned at the inlet in 60 seconds. Its maximum allowable temperature is +40 degrees.

The system has a membrane that operates at the nanoscale. It provides a complete cleaning fluid with a minimum of salt balance.The first link is a cartridge, a similar option is used in simpler devices. To obtain such parts used foamed polypropylene. A typical element resource is 20 tons of water, if it is exhausted, it is easy to change the problem block with your own hands.

The second level of protection against dirt sometimes becomes a BAF cartridge, which can also be an autonomous cleaner. This device allows you to save water from the following elements:

• heavy metals, manganese, copper;
• mercury, petroleum products;
• phenol, many bacterial and viral organisms.

The liquid treated in this way has an excellent color, taste, and is distinguished by the absence of bad “aromas”. During service, the BAF can clean up to 12 tons of water, with a minimum daily pass of 7 liters. If this requirement is not met, the quality of work cannot be guaranteed. In the isolated mode, the operation time is significantly shorter than in the complex filter.

The set of interchangeable cartridges also includes the SCB system, obtained on the basis of coconut wood (converted into charcoal). Compared to a simple granular preparation, it is muchmore effectively absorbs various pollutants. Such a unit finally releases water from chlorine. It helps to improve its color and other organoleptic properties. Change the SSC is required after cleaning 7000 liters of water.

The next stage of processing is performed in a nanofiltration membrane, which can reduce water hardness up to 80%. Since this method of softening does not lead to the complete elimination of mineral salts, the beneficial characteristics of the water are saved in full. When all the listed stages are completed, the fluid passes into the hydraulic accumulator.

The feedback from experts about Geyser-Nanotek is certainly positive. But professionals point out a number of subtleties that consumers should take into account.

• You should carefully check the completeness of delivery, only this helps to prevent many problems.
• It is advisable to put a pressure gauge and constantly monitor the pressure on the input. If the water supply cannot provide a pressure of 3 atm and more, there is no point in buying this filter, it will be disconnected all the time spontaneously.

The perfection of reverse osmosis filtering systems results in high installation requirements. When the seller’s package of services includes installation for free or for a symbolic amount, it should not be neglected. The fee for "Geyser-Nanotek" is quite high, you can reduce financial losses when buying shares. It is also important that all costs incurred invariably pay off. The critical pressure for the incoming water will be 8 atm, and it should not be colder than +4 degrees.

We must not forget that the hull parts were subjected to tests for tightness and resistance to water hammering; therefore, water may remain in the newly purchased filter. Only when absolutely necessary should the connections made at the factory be disclosed. Be sure to block the flow of cold water and relieve pressure, opening the mixer.

Experts check whether the flasks are tightly tightened and tighten them as needed. This check is repeated during the installation process, which looks like this:

• the collet ring is pressed against the fitting, carefully removing all shipping plugs;
• bracket with housings and cartridges must be placed in a convenient position at least 150 mm from the floor;
• It is forbidden to install the filter and its tank closer than 1 m from the heating equipment;
• after sealing the joints mount the tee on the cold highway;

• after inserting a plastic tube into the nut, the same tube is inserted into the fitting of the valve and screwed tightly;
• through the free end the water will flow directly into the filter or on the low pressure switch tee;
• further, they collect a storage tank, immediately taking care of its stability;
• sealing joints made with a special tape;
• the drainage clamp is placed along the line intended for it; you will have to drill a 0.7 cm wide hole;
• for durable connection, use screws, trying to ensure that the holes in the fitting and the drainage strip match.

When the system is installed for the first time, and after replacing the cleaning elements, the carbon cartridges are washed. Drink the water that first entered the tank, it is impossible.You have to completely drain it and refill it.

How to install the filter "Geyser-Nanotek", see below.