Three-tier beds for children: types, design and tips for choosing

When arranging children's rooms in their home, young mothers and fathers pay special attention to the choice of a bed for their child. For parents with many children the best option would be a three-tier sleeping design. Today we will talk about the varieties of such beds and their features.

Triple beds for children may vary in design type:

• folding designs;
• three-tier fixed beds;
• retractable beds;
• transforming beds;
• suspended sleeping designs.

In addition to the three-tier beds, there are not folding designs, comfortable beds, sofas, beds, attics. Angular children's berths are considered to be an advantageous option. There are even combined models.Three-tier stationary beds are a design with three places to sleep. They are located above each other. Such models may have small storage boxes on the sides or bottom.

The most popular among consumers are vykatnye models. They are considered multifunctional sleeping places for children. This furniture is a design with three places to sleep. In this case, the lower surfaces are extended.

Not folding children's designs are in great demand from young parents. They represent three beds that are under each other. The last tier is almost under the ceiling. The cost of such models is much lower compared to others.

Parents often buy retractable three-tier corner beds for their children. All structural elements are angled relative to each other. This arrangement allows you to visually increase the space of the room.In the assembled state, such a model looks like one bed.

An increasing popularity among consumers is gaining a combined triple bed for children. This design is represented by three floors. The lower tier is retractable, and the top two are always in a stationary state located above each other. A small staircase is attached to the other two floors. The height of such a baby bed is at least 1.5 meters. Therefore, it is absolutely safe, even for small children.

Separately, it should be noted model transformers. They are the most versatile models that can easily be transformed from a bed to spacious storage cabinets. Often, transforming beds are transformed into podiums. Children can play on them during the daytime. Such designs significantly save space in the room.

Children's loft beds are also in good demand. These sleeping structures are different in that they can have a place to sleep only at the top, at the bottom there are various additional compartments for storage.But the loft bed can also have a sleeping place in the first tier. And at the top of them may be several. This option perfectly saves children's room space.

Before assembling and installing a triple children's bed, you need to choose a suitable place for him in the room.

In this case, you need to remember a few basic rules.

• Additional lighting for the upper floor. For a child who will be on the top tier, you need light. Therefore, the design should be located where the maximum lighting.
• Location farther from window openings. After all, the noise from the street can interfere with the sleep of children.
• Placement of the ladder at the side. When installing, provide some space on the side of the bed in order to fix the stairs there. Otherwise, it will interfere with the child who sleeps on the first lower floor.

• The organization of the play area. If there is too little space in the children's room, then use sleeping places as such zones. Often, maze games for children are made from such structures.
• Installation of additional storage space. To significantly save space in small children's rooms, you should leave some space on the side of the bed. There are capacious boxes for storage of children's things.

Three-tiered beds for children have a number of important advantages.

• Saving space. These beds can accommodate several children without taking up too much space. In addition, often similar sleeping structures provide for additional playing areas.
• Multifunctional. Most models of triple beds have game podiums, storage cabinets, compartments for toys.
• A wide variety of designs. Three-story children's beds are available in a variety of styles and colors, so you can pick them up for almost any interior room.
• Individuality. For each child a sleeping place was chosen. And children can be completely different ages.

Despite such a rather large list of advantages, three-tier children's beds have certain disadvantages.

• High altitude. Because of this, many children refuse to sleep in the upper tier, as they are afraid of excessive height.
• Unsuitable for children suffering from diseases of the respiratory system.Remember that on the top floor of such structures the air is much drier and warmer, which can harm the health of children.

If you want to install a three-story bed for your children, then you should take care of good lighting. In this case, it is most advantageous to install light sources for each individual bed. For lighting it is not recommended to use too powerful lamps. You can take small LED sources. At the same time, it is worthwhile to place them in such a way that the child can easily turn them on just by extending his arm.

Before buying a suitable three-story bed, you must carefully check all models. They must fully comply with all safety standards. So, all metal and wooden elements of beds should be carefully ground. After all, often young children pull out the details. Due to their poor processing in the production of parts, children can seriously get hurt.

All supporting structural components and racks should be made only of strong wood or metal base. Only in this case the bed will not bend under the weight of the child and will be able to serve for a long time.

Scroll through the base under the mattress. It can be of different types.

• Orthopedic view. Such a base is considered the best option for the child. It is a structure of broken slats.
• Deaf base. It is a flat plywood surface. This option is not the best, because it can not provide normal ventilation of the bed, as a result of which there appears excess moisture and harmful microorganisms develop. There will be no orthopedic effect from such a base.
• Rack base. It consists of wood slats. In the manufacture between them leave a small distance, it provides ventilation of the mattress. But at the same time there will be no orthopedic effect.

Check that the bed was made only from natural wood. After all, a lower-quality tree can emit various substances harmful to the human body that were used in its manufacture (formaldehyde). This is especially true of those with whom these sleeping structures are located under the sunlight. The cost of natural material is much higher than artificial.

All details in the three-tier beds must be bonded to each other with special durable hardware. Check the entire sleeping structure for strength. To do this, gently press on its edge. If it bends down, then for reliability it is worth additionally fixed to the wall with the help of anchors.

Take a separate look at the bottom and main frame of the three-story beds. They must be the most reliable and durable. After all, most young children love to play and jump in their beds. Pay attention and stairs. Her handrails must be firmly fixed. Otherwise, the baby, climbing it, can not resist and fall from a height.

1. Today, manufacturers can offer many different options for beautiful three-tier beds for children.So, in the nursery you can put a stylish retractable bed in black with bright inserts (green, yellow, blue) and with a small ladder. This design is suitable for almost any interior.
2. For children's rooms, made in beige colors, suitable wooden pull-out beds with a massive staircase, which are built-in storage boxes. At the same time between the tiers there may be shelves on which toys are placed.
3. Corner wooden structures with extra drawers at the bottom and brighter mattresses can be used for bright interiors. They can be together with small dressers for children's things.

Review the three-tier bed for children, see the following video.