"Morion" from "Aquaphor": description and installation of products

Clean drinking water is the main component of the health of any person. However, in modern cities there is often a big problem with the plumbing system: the pipes are old, they have mold and rust. The water of them can not only drink, but even wash it with caution. The solution to this problem can be the installation of a stationary water filter in the apartment. And one of the most popular water purifiers of this type is the Morion filter from the Aquaphor company.

Special features

The filter "Morion" is designed taking into account the characteristics of different regions of the country. After installing such a device, the consumer has the opportunity to drink water directly from the tap, without making any additional manipulations, such as boiling.The water purifier operates at the expense of a compact reverse osmosis system (“Osmo”). It is easy to install and maintain. Small dimensions allow to fit such a device even in a very small kitchen, without harming the interior. The filter not only purifies water from impurities, but also enriches it with useful minerals, eliminates any odor and taste, significantly reduces the degree of hardness.

The filter operation system is fully automated, which makes it possible to use the equipment even with low pressure. This is especially true for apartments that are located on the top floors of high-rise buildings. In addition, the use of the Morion filter allows you to clean about 8 tons of water per year of use. This has a positive effect not only on the family budget, but also on the state of the environment. Indeed, in the modern world it is especially important to pay attention to the conservation of natural resources.

The company "Aquaphor" has released 2 models of filters "Morion": dwm 101s and dwm 101. The Morion dwm 101 was the first version of the water purifier. Its principle of operation was to remove small particles using the bottom of a special membrane module and a drainage tube.

"Morion dwm 101s" is a newer model of the filter, cleansing the liquid from impurities through the membrane, which is located on top. The fluid moves in continuous mode through the base of the cleaner and is discharged into the sewer pipes. This technology of water treatment is called "reverse osmosis". This is the newest method of water purification today, which allows you to drink raw water straight from the tap.

By the way, the new version of the filter eliminates interruptions in work under reduced pressure in water pipes. So, you will always be provided with high-quality purified water, regardless of any external factors. The filter works pretty quickly - the tank is fully recruited within 5-25 minutes. The approximate filling speed of the tank at low pressure is 20-60 minutes.

Features and Benefits

The Morion filter successfully copes with the removal of any kinds of impurities in the water, the elimination of its rigidity. It enriches water with magnesium and calcium - useful microelements that are important for the normal functioning of the human body. Installation of filters made without any extra effort. The cleaning time of 1 liter of water is 5 minutes.The filtration rate exceeds other water purifiers by 2 times. At the same time the filter is cheap, easy to install, just change the cartridges. And the whole system is quite inexpensive.

disadvantages

Some buyers may consider a minus a small volume of water purifier. However, for a large family, Aquaphor can provide other types of filters. Other disadvantages of this equipment have not yet been identified.

Device

The design of the water purifier is extremely simple. It consists of a body - the top with collectors. They are mounted replaceable modules for cleaning fluid. The upper part of the case is closed with a lid and fixed with plastic elements. "Morion" has a five-liter tank for the accumulation of water. Capacity does not change with pressure level, filter or membrane type. This means that the use of such equipment ensures constant high-quality cleaning of the fluid under any conditions. Another important structural element of the filter is the preliminary preparation unit. With it, water is thoroughly cleaned from heavy metals. This is necessary so that with further cleaning the membrane of the device is not damaged.

Next is a block with a reverse osmosis membrane. In fact, this is the main part of the water purifier, since it is there that the hazardous organic compounds are removed and the water is also softened. The liquid conditioning unit is required to eliminate the unpleasant smell of water, as well as to improve its taste. Water is enriched with minerals in this part if the type of construction provides for such a function.

Principle of operation

The new filter "Morion" has a unique liquid cleaning circuit. Water flows through the cold water supply to the dwm system. It is then passed through a pre-filtering unit. After that, a special automatic valve directs the flow of water to the membrane. Then through 1 opening of the casing passes purified water, and through 2 - drainage liquid, which is discharged into the sewer system. Pure mineralized water fills the tank, which has 2 parts. The first is cumulative. It is there that purified drinking water is stored. The other part is designed to accommodate industrial water. The water purifier system is thought out to the smallest detail. The manufacturer has done everything so that you can receive high-quality water without effort and cost.

This filter is warranted for 3 years.

Kinds

The manufacturer is constantly working to improve product quality. Therefore, there are several versions of the filters "Morion". Consider the main ones.

DWM 101S

This mineralizer filter effectively purifies water of any quality from harmful impurities and enriches it with magnesium. Water from such a purifier can be drunk to everyone, including infants and the elderly, people with low body resistance. No chemicals are used for filtration. At the same time, pathogenic bacteria, allergens, viruses, chlorine, antibiotics, as well as agricultural and industrial waste (phenols, pesticides, nitrates, etc.) are completely removed from the liquid. By installing such a filter, you save a lot of money. A water purifier saves approximately 9 tons of water per year.

And also the use of the filter extends the service life of household appliances: kettles, coffee makers, multi-cookers, and so on. Because hardness salts do not fall on them. In addition, you can forget about spending on bottled water from shops.

The equipment is small and takes about 4 times less space under the sink compared to standard cleaners. Replacement of cleaning models is carried out once a year and a half.In this case, the change of cartridges will take no more than 1 minute.

DWM 102S

This filter has similar characteristics with the previous version, except for some moments. It enriches water not only with magnesium, but also with the optimal amount of calcium. And also completely eliminates the increased hardness of water - the main cause of the occurrence of scale. The rest of the functions of the Morion DWM 101S and DWM 102S are the same. This filter also effectively removes any harmful impurities from water, including pollen, chlorine and phenols. Easy to install and maintain.

Replaceable cartridge K-100s

This replaceable cartridge is presented in the updated case. It is suitable for filters DWM-31, DWM-41, Aquaphor Osmo 100K, DWM100. With this cartridge, you can achieve a perfect softening of the liquid, the elimination of all dangerous impurities, viruses and bacteria. Do not install the cartridge in an inappropriate water purifier. This can significantly affect the quality of the filtered water.

Replaceable cartridge K-50

This type of cartridges is intended to be excluded for the “Aquaphor Morion” DWM-101, 201, DWM-70, “Aquaphor Osmo” 50K, DWM-41 filters. If you do not know what type of membrane you have, then you can easily find this information on the box and in the equipment passport.If you do not have either one or the other, then you should be guided by the date of production and the sequence number of the filter, which are written in the lower part of the structure. So, for the DWM-101S models, the release date can be no later than 12/21/15, and the maximum sequence number is 114,992. If the release date is earlier, then you have the DWM-101 filter.

Installation and Repair

Installation of any type of filter should begin with choosing the right place to install it. It is important that the inlet tubes pass unhindered, without bends and creases. The surface for the installation of the equipment must be smooth and durable, because installation in an uneven place can cause vibrations and noise. And also next to the filter should not be boilers, stoves, washing machines, other sources of heat.

After a suitable place is determined, connect the filter in the sequence specified by the manufacturer.

  • Shut off the cold water supply.
  • Open the kitchen tap to relieve system pressure.
  • Connect the connection with the water supply, if necessary, seal the threads with a fum-tape.
  • Connect the water connection.
  • Connect the red JG inlet tube. To do this, it is necessary to remove a special clip from under the plastic sleeve and place the end of the tube wetted in water into the fitting sleeve until it stops at a depth of about 20 mm.
  • Return the clip to its previous position.
  • Check the reliability of the fixation of the tube: it should not be pulled out with a force of 8–10 kg.
  • Close the inlet tap.
  • Run the main water supply.
  • Check if the connection is flowing.

During the entire installation process, it is important to ensure that the seal always remains in place and is not damaged.

Now you need to go to the installation of the tap for the supply of clean water.

Prepare all the parts, then follow the steps below:

  • make a hole in the wall diameter of 12 mm with a drill;
  • put on the rubber gasket and decorative stand on the threaded shank;
  • place the faucet in the drilled hole;
  • Slide the plastic and metal locking washers onto the shank, securing everything from the bottom of the worktop with the nut;
  • insert the blue tube into the shank of the crane with the end with the metal sleeve, fasten everything with the flare nut up to the stop;
  • check the reliability of the design.

Then the drainage clamp is installed.

Remove the protective film from the gasket, stick it on the inside of the clamp so that the holes in the fitting of the clamp and gasket match. Install the clamp on the drain line, evenly fasten the bolts. Then make a 7 mm hole in the nozzle. Put a plastic nut on the fitting, and check the strength of the connection. After installing the system can not immediately drink water from the tap. First you need to skip approximately 10 liters of fluid to wash the modules and membranes of the water purifier. If you need to repair the filter, it is better to call for this specialist who will cope with the work quickly and without consequences. However, if you still need to quickly resolve any problem, be guided by the same sequence of actions as when installing the equipment.

Tips

To choose a filter that will perfectly cope with water treatment in your home, you first need to determine the type of tap liquid. To do this, you can do a special analysis or focus on the physical characteristics of water.For example, if scale is formed in a kettle, it means that the water is too hard, and water purifiers with softeners should be used. When the liquid has an unpleasant smell, this indicates the vital activity of pathogenic bacteria. So, in this case, a filter is needed, which has the function of removing germs. The Morion filter is just one of these water purifiers.

But it is also extremely important to change the cartridge for cleaning in time. The approximate period of replacing the modules is registered on the packaging of a specific filter. However, the exact time depends on the degree of contamination of water and the intensity of use of the filter. Professionals recommend changing cartridges at least once every six months. However, in some cases, you can install another cartridge only after a year and a half. The main thing is to strictly use only those replacement cartridges that are suitable for your model of water purifier.

Even when choosing a filter is to take into account the number of members of your family. Indeed, the volume of the filter depends on the amount of drinking water consumed daily.

Reviews

Most of the reviews on the Internet for the products of the brand “Aquaphor” are positive, thanks to this, more and more buyers make the choice in favor of just such water purifiers.The main advantage of these filters over others is the ratio of cost and quality. The price of the filters is quite affordable, affordable for every family. At the same time, the durability and efficiency of the equipment remains at the highest level. As well as buyers note the convenient compact dimensions of the device. Due to this, it can be easily installed in any kitchen. And most importantly - with this filter you can drink water directly from the tap without fear for your health. The taste and color of water varies noticeably, it becomes completely safe for humans.

How to install the filter Aquaphor DWM-101 Morion do it yourself, see the next video.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom