Water filter "Modern" from "Aquaphor": features and recommendations for use

If you need a filter to clean the water, many prefer cleaners in the form of nozzles. One of such products is the filter "Modern" from the company "Aquaphor", which has extensive experience in the production of cleaning equipment, as well as constantly improving its products with each new collection. These products have their own characteristics and recommendations for use.

Filters "Modern" company "Aquaphor" are flow-nozzles flow type. They are characterized by maximum performance and ease of maintenance.Such products have a sleek, streamlined design. They look modern, so they will fit perfectly into the water supply system. The operation of these devices is aimed not only at purification, but also at softening tap water.

Filters from "Aquaphor" are equipped with replaceable cartridges, inside of which is activated coconut charcoal. In the process, he acts like a sponge, absorbing harmful impurities that pass through it with water. In this way, water is discharged from chlorine. At the same time, rust and other debris characteristic of the running water of multi-piping pipelines are retained.

These filters belong to the category of household cleaners, they are:

• more efficient than jug models;
• easy to install;
• do not work with spray valves;
• have replaceable modules;
• intend for cold water;
• mobile and easy to remove if necessary.

The filtering substance of each modification of the filters "Modern" are soft granules of coconut coal. It allows you to get the output water that is safe for human health. Due to the existing aqual fibers, it is possible to maintain a high rate of water purification. These filters cope with chlorine and its compounds, which is beyond the power of other analogues of other brands. However, if the water is very hard, their life may be reduced.

Filters "Modern" have 3 types of execution. Modernization allows you to increase the capabilities of cleaners.

Model 1 performance is different from other post-treatment functions. It is able to neutralize active chlorine, remove turbidity and rid the water of complex chemical compounds. This filter has an attractive design and ergonomics, has 2 types of bushings in the configuration (standard and smooth). Because of this, it is suitable for any cranes. The principle of purification is based on the use of granular and fibrous absorbents, which give a high level of water purification.

Filter 2 of the performance has a cartridge that holds sand granules, rust, suspensions and small particles that make the water turbid. Due to its small size, it can be installed in any (even hard-to-reach) place. The model has a separate tap for drinking water and a convenient switch that allows you not to disconnect the filter if the user does not need filtered water.

The device cleans water well, improving its taste. Against the background of its disposal of harmful impurities, the work of the cardiovascular system and the gastrointestinal tract, normal to which rusty water with harmful suspensions harms, is normalized.

Filters 4 versions, as well as other analogues, are devices for deep cleaning, which are installed to the mixer tap without disassembling the pipeline. Such a unit also has its own spout for clean water and a kit consisting of two filter modules. The resource of this model is 4000 liters. In a minute this device is able to clean about 1.2 liters of water.

Model 4 performance differs from the classic version 1 and 2 performance of water softening. It is equipped with a nozzle with a switch, so that this filter can be fixed not only temporarily, but also permanently.This is the most popular version of the Modern filter nozzles, which is best suited for hard water.

Inside the housing, the nozzle has filter modules that are located at the top and bottom of the water purifier. Dimensions of the cylindrical body are 273x117 mm. The maximum possible pressure can reach 5 atmospheres. The housing has a tap for connecting to the water supply and a tap for a tap supplying purified water. So that the user does not forget to change modules in time, on top of the filter there is a calendar that determines the recommended date for replacing the cartridges.

The first 50 liters of the device will be:

• completely eliminate water from active chlorine (100%);
• “Release” it from petroleum products and heavy metals by 98%;
• will remove phenol by 99%;
• will remove pesticides by 95%.

By the end of the work, the efficiency will decrease slightly - the filter will rid the water of oil products and pesticides by about 90%. At the same time, chlorine will be removed from water by 95%, phenol - by 91%, and pesticides - by 90%. To clean the fluid, you can use a replaceable module B-200, or B-200ZH. They change when the resource ends.

In order for the filter to serve for a long time, it is necessary to change replaceable modules in time.

The device maintenance is simple - you need to follow a small instruction:

• it is necessary to unscrew the upper and lower parts of the case of the water purifier installed in the sink to the left, or to the right of the faucet;
• modules are carefully removed;
• in their place you need to install new cleaning cassettes;
• on the calendar set the date of the recommended replacement;
• the upper and lower parts of the case tightly twist;
• then wash the water purifier at a capacity of 1 l / min for several minutes.

Cleaning filters-nozzles need to comply with certain rules of operation. For example, they cannot be used to filter hot water - they are not designed for this. If for some reason the user has forgotten this rule, accidentally passing hot water through them, you need to rinse the filter for a few minutes to ensure its normal operation. However, continuous filtration of hot liquids is unacceptable.

The manufacturer notes that the filter is designed for the purification of tap water. If it is used to cleanse a different liquid, it must be boiled after filtration. Drinking such water without boiling is not worth it. If the device is in an idle state (for example, the user went on vacation), to work properly, you need to clean the filter by opening the tap for 5 minutes.

During operation, you should try not to allow mechanical damage to the device. You can not hit it, you need to protect the device from falling. In addition, it should be protected from possible negative external factors. For example, you can not connect to the mixer, if it is located near the heating device.

When the life of the cartridges is over, they must be disposed of in accordance with environmental and sanitary standards. The service life of the filter is 5 years. Only products that are stored in the right conditions for no more than 3 years before the sale are suitable for the purchase. If the package was opened before the purchase, you should not take such a product.

You need to purchase a filter in the store, which will provide the buyer with a certificate of quality, which will indicate the authenticity of the goods. You can visit the manufacturer's website, as well as inquire about the address of a particular outlet, find out for yourself whether the seller is the official supplier of the company’s filters.

It should be taken into account and reviews of customers who have already purchased such devices. When buying, you need to consider each element of the cleaner, whether it is a case, cartridges or an adapter for a crane.

The kit must be complete. The label must indicate the date of issue. In addition, the seller must stamp with the date of sale. Having a warranty is another criterion for a proper purchase.

Review of the water filter "Modern" from "Aquaphor", see the following video.