"Crystal" from "Aquaphor": types of models and the installation process

It is no secret that modern man does not live in the best environmental conditions, especially as regards drinking water. Poor ecology, a worn-out plumbing system, a decrease in the quality standards of cleaning have led to the fact that water flows from our tap, which has an abundance of harmful impurities. The health of a person directly depends on the quality of the liquid he consumes, so the correct solution would be to use a filter for cleaning. A good filter will take care of all these concerns, but unfortunately, the usual cleaner in modern conditions is not enough. Water purifiers "Aquaphor" series "Crystal" will help solve these problems.

Three-module filter system "Crystal" from "Aquaphor",having a multi-stage filtration, allows you to thoroughly clean the water that will be used for drinking, cooking and will be safe for baby food. Each of the three modules thoroughly removes all harmful impurities. Eco-friendly materials and advanced ion-exchange technologies are used in the creation and production of filters. Thanks to the unique CFB technology, filters absorb various contaminants 4 times faster than conventional ones.

“Crystal” filters from “Aquaphor” are distinguished by the following features:

• water is purified from calcium salts, due to which it is softened;
• chemical-type impurities such as chlorine, hydrogen sulfide, pesticides, and many metallic elements are retained;
• deironing to avoid disorders of the digestive and urinary systems;
• the filter performs antibacterial disinfection, which allows the use of produced water for baby food;

• The structural system of the “Crystal” filter allows you to install the case of the product itself under the sink, while a convenient faucet is displayed on the countertop;
• high filtration rate is ensured due to the contact area of ​​the treated water and sorbents, which is larger than other filters;
• it is possible to choose a module depending on the quality of water in a particular region, which makes it possible to use the cleaning system more efficiently;
• unique mounting techniques avoid contact with dirt and the need to purchase a special tool when replacing cartridges;
• The body and fittings of the “Crystal” filter from “Aquaphor” are protected from abrupt pressure surges, thus avoiding leakage.

Many different contaminants present in tap water have led to the fact that often different technologies are required for cleaning. The filters of the “Crystal” series from “Aquaphor” at the expense of replaceable modular cartridges even under the condition of purchasing a certain series allow adjusting the cleaner to the specific needs of the buyer. The Aquaphor company has developed and patented a number of technologies used in their cartridges and ensuring the highest water quality.For example, Aqualen fiber retains metal ions, releasing sodium ions instead, processing the incoming liquid with ionic silver. Carbonblocks due to the special mixing system with the fibers "Aqualen" allow you to increase the throughput and filtering capacity of the cartridge.

The main line of filters "Crystal" is divided into three types: Crystal Solo, Crystal and Quadro Crystal. The main difference between these filters is the number of modules used for cleaning (one, three and four filter units, respectively). Quite recently, the new fourth development of the Aquaphor company, the Crystal Eco series, has appeared. It is necessary to elaborate on each species.

• Crystal Solo Line from "Aquaphor" are represented by the most compact filters. The main difference of this type of filters is the presence of one cleaning module. This cleaner will take very little space, while the buyer will receive drinking water of excellent quality. The price of this filter will be the lowest compared to other types. The filtration rate of the cleaner is 1.5 liters per minute. It is designed to filter up to four thousand liters."Crystal Solo" is supplied in two versions: "Standard" and "Ultrafiltration." In the “Standard” modification, the filter removes impurities, rust, pesticides, heavy metals and active chlorine. "Ultrafiltration" also allows you to remove bacteria, Giardia cysts and any other particles of impurities larger than 0.1 micron.

• Crystal Series Filters it is completed with three replaceable blocks, allowing to carry out cleaning stepwise. These are traditional water purifiers in the Aquaphor filter line. Their cost is slightly higher than that of the “Solo” series water purifiers and they take up a little more space under the sink, but at the same time, the filters of this series have higher productivity (filtration rate is 2.5 liters per minute). The resource of this filter is also significantly larger and is about eight thousand liters. The Kristall series is available in four versions (Standard, For Hard Water, Microfiltration, Microfiltration for Hard Water) and allows the buyer to choose the filter that is suitable for him.

• Crystal Quadro - This is the most powerful flow filter "Aquaphor". It is equipped with four modules and allows you to achieve a high degree of purification even in the most difficult conditions.The filtration rate and resource of the “Crystal Quadro” is identical to the filters of the “Crystal” series (speed 2.5 liters, resource up to eight thousand liters). "Crystal Quadro" is available in five versions: "Standard", "For turbid water", "For hard turbid water", "Ultrafitration of hard turbid water", "For very hard water". "Standard" and "For turbid water" is suitable for cleaning from rust, sand and many other impurities. They trap precipitation and allow for the removal of suspended particles from 0.8 microns in size. The remaining modifications of the Crystal Quadro filters are intended for purifying water of different degrees of hardness by softening it. The module "Ultrafitrati hard turbid water" will allow to make the cleaning of bacteria. The modification “For very hard water” will additionally soften the water using ion-exchange processes of the resins that make up the filter.

• Crystal Eco - this is a novelty in the Aquaphor filter line, which is distinguished by the use of a hollow fiber membrane from Japan in the filtration system. The filter not only allows you to clean impurities and chemical contaminants, but also provides absolute protection against bacteria.At the same time water is not enriched with antiseptics.

And also it is possible to single out such models as the stationary set “Osmo” and “Universal”, which have hydraulic resistance. Customer reviews about them are mostly only positive. The cleaning circuit of these units is simply excellent.

Important! Before starting the installation of the cleaner, check the need for a pressure regulator. To do this, measure the pressure in the water supply system; it should not be higher than 0.63 MPa (6.5 atmospheres).

Installation can be divided into several stages.

• Location First you need to choose a convenient place to install a water purifier. It is necessary to determine the place for the installation of the faucet and the place where the cleaner connection to the water supply will be located. During installation, it is important to position the loose tubes in such a way that they are not overtightened, they could not be damaged or pulled out of the attachment points. It is necessary to distance the cleaning system from heat sources (cookers, boilers, washing machines, etc.).
• Training. To install the cleaning system, it is necessary to prepare the following tool: a drill, a 12 mm drill for metal, an adjustable wrench, a phillips screwdriver, and a 14 mm tubular end wrench.
• Installation of the crane. In the place of installation of the crane should be drilled a hole with a diameter of 12 mm. On the threaded tail of the crane, you should put on a decorative stand, a rubber gasket and a washer. You should try to avoid the use of force, because the connection node can be easily damaged during installation.

• Installation of the filter. It is necessary to block cold water and be sure to relieve pressure by opening the mixer. It is also necessary to drill holes under the filter in order to install the self-tapping screws on which the cleaner will hang. Need to hang a filter. Then you need to start connecting the supply tubes. The arrows and pointers drawn by the manufacturer on the filter, do not get confused during installation. The tail of the crane should be placed in the drilled hole, then consistently put on it a plastic washer, a metal washer and fix the element with a nut. You need to install filtered modules in the sequence specified in the instructions for a particular type of filter. It is necessary to moisten the end of the tube (without pressed metal sleeve) with water. Insert the tube with the wetted end into the filter up to the stop, the arrow of the entrance will show the correct direction and the required depth of insertion, then it is necessary to fix the tube using a retaining clip.It is necessary to take a tube with a brass bushing and, putting a cap nut on it, attach it to the crane, securing the structure with a fixing nut. Having detached the retaining clip, you need to insert the supply pipe into the connection and reinstall the retaining clip. Open the faucet with cold water, the free end of the tube, which does not contain bushings, should be inserted into the filter, arrow “exit”. Secure the retaining clip again.

• Check. To check the filter's performance and the absence of leaks, it is necessary to open the valve on the connection point, adjust the head, remove the cap and the transport films, if any. It is necessary to open the tap supplying the purified water, and to drain it for at least 10 minutes. This measure is necessary to remove the microscopic parts of the sorbent and coal dust. Then it is necessary to close the valve and leave the filter inoperative for 10 minutes. After a break, it is necessary to drain the water from the tap for at least 50 minutes. This procedure will completely flush the cartridge to get clear and clear water.

Such turbidity will not last long, and when the water becomes clear, you can try it. If you feel a bitter taste of water, do not be afraid, this taste gives the material of the cartridge desalting blocks. Soon the bitterness will disappear and the water will remain clear, clean and ready to use for drinking and home cooking.

For effective cleaning consumers need to follow some simple rules of operation. To monitor the occurrence of possible kinks in the hose, in the connection node. Promptly replace the cleaning module cartridges. The life of the cartridge is indicated by the manufacturer on the front of the filter. As a rule, cartridges for models of the “Standard” series are designed for a service life of up to 7000 liters. Cartridges for models that soften water and purify turbid water, have a service life of 4000 liters. For models working with hard water, the service life of up to 6000 liters. On average, depending on the amount of fluid consumed per household, each cartridge must be replaced after 6–10 months of use. The membrane for filters of the Crystal Eco series is changed once a year.

Softening cartridges for the series "Crystal", "Crystal Quadro" can be regenerated. To do this, you must purchase an adapter for regeneration (recovery) and spill salt solution through the filter module. This type of recovery will allow you to use the cartridge for another 3-5 months. In a cartridge used as a softener, an ion exchange resin replaces sodium ions with calcium and magnesium ions found in water. A solution of salt will restore the supply of sodium ions and allow the filter to soften the water in the same volume and quality. Any of the selected filters “Aquaphor” will purify the water and enrich it with antioxidant properties.

How to install Aquaphor OSMO Crystal, see below.