Types of metal "MetalProfil": features and classification

Metal "MetalProfil" is very popular among consumers because it is characterized by aesthetics, high quality and reasonable price. The company offers a very wide range of roofing materials. This article describes the features and classification of types of metal from this manufacturer.

Metal "MetalProfil" is used in multi-and low-rise construction. It is used in the creation of sports buildings, kiosks, shopping pavilions, warehouses, stopping complexes. Since such roofing materials differ in aesthetic appearance, they are used for the construction of various commercial buildings, private houses.

Metal "MetalProfil" is quite easy, it does not load the rafter system very much, the load-bearing walls and the foundation. For this reason, such a building material can be used in construction on shallow grounds. The metal tile from this producer differs in the increased resistance to temperature differences, it is suitable for use in various climatic conditions.

Such roofing materials are suitable for a variety of roofs: for gable, single-pitch, non-standard. However, this is not a suitable option for rounded roofs. Metal tile "MetalProfil" should not be chosen also in the case if the angle of the slope is less than 14 degrees.

You can order a kit that will be cut to size.

Metal tile can be used for the reconstruction of old buildings. If the previous roofing is flat (created from roofing material or metal), there is no need to carry out demolition work.

If you store the material correctly and follow the recommendations indicated in the installation instructions, the finished coating will be highly resistant to various atmospheric influences.

The metal tile is called so for the reason that outwardly it is very much like a classic clay tile. Both of these coatings are environmentally friendly, but the clay is significantly inferior to the metal due to the high price and high weight. In the reviews, consumers write that the metal tile "MetalProfil" is quite affordable, but at the same time very high quality.

The manufacturer creates products on automatic lines. For the manufacture of metal used galvanized sheet steel. The steel sheet becomes undulating due to the forming rollers. The treated products look like tile coatings and are characterized by an increased carrying capacity.

Special protective coatings are applied to the products:

• Hot zinc melt. In some cases, aluminum is also added to this material. This layer is basic. It provides effective protection of surfaces against corrosive effects.
• Adsorption or passivation layer. The product is covered with an oxide film, which prevents the occurrence of corrosion. Such material is resistant to many aggressive substances.

• Priming. It increases the corrosion resistance of the surface and is the link between the base and the polymer coating.
• Polymer coating. Such coatings vary in resistance to mechanical stress, resistance to liquid, composition, and so on. They give the coatings certain decorative properties: color, textured pattern.

The manufacturer provides high quality products due to:

• using the latest equipment;
• the use of high quality raw materials;
• strict control at every stage of production.

The company "MetalProfil" offers a variety of collections of metal:

• MaxiCascade. Such material is very well suited for climate in Russia.It differs in the increased resistance to ultra-violet radiation, temperature differences, influence of liquid. This metal tile is very durable. It can be called universal, as it is well suited for both high-tech style and classic.

• "Cascade". This metal looks like chocolate. With proper installation, it will last for decades.
• Monterrey. This material is very similar to clay tiles, but its performance is much better. "Monterrey" can be attributed to the classic metal tile.
• "Maxi". This metal tile has high strength, but relatively low weight. It is well suited for large areas. Steel is quite thick, so it is highly resistant to various external influences.
• Supermonterrey. The degree of profile of such a metal tile is higher than that of Monterrey, hence the name. Such building materials are made of metal, which has a very high quality. They also apply a special coating that provides reliable protection of the surface from weathering.

Metal tiles "MetalProfil" differ from each other by the wave pitch, profile height. Such coatings are made in different colors, they can be matte or glossy. The final cost of metal depends on the quality of the protective coating, the thickness of the product. Consider the features of popular coatings from this manufacturer.

Such coverage is the most budget. Their surfaces are glossy, smooth. This tile can be of different colors (you need to ask about the presence of certain shades).

Sheet thickness - 0.45 and 0.4 mm. Coatings 0.4 mm thick are not highly resistant to mechanical stress. They may be damaged by large amounts of snow or during installation work.

Such coatings have a greater thickness: 0.5 mm. They can be called one of the most popular among all metal tiles from the company "MetalProfil". The manufacturer offers products Norman different colors.

Viking coatings are the result of cooperation between AkzoNobel (a company from Sweden) and a manufacturer from Russia.Such metal tile differs in noble appearance. The roof is matte. Sheet thickness - 0.5 mm and 0.45 mm.

On thicker products a special coating is applied. It consists of a polyester that provides elasticity and a polyurethane layer designed to protect the surface from mechanical effects. Such products are presented in several colors.

This metal tile has a special polyurethane coating: it is the result of cooperation between Marcegaglia (an Italian industrial company) and AkzoNobel. This coating is considered the most balanced. The sheets are rather thick: 0.5 mm.

Such coatings can be called ideal for the harsh Russian climate. In terms of reliability, they are not inferior to the best foreign analogues. The metal tile PUR50 differs in wear resistance, high mechanical strength and resistance to corrosion.

This metal tile has a very durable polyurethane coating. Additional corrosion resistance gives it an aluminum layer. Such coatings are not only standard colors: the manufacturer offers more original options. Metallic colors are available to consumers.

The coating is very thick, therefore it is very resistant to various mechanical effects. For this reason, such a metal tile is very popular among professional builders, roofers.

The coating consists of polyvinyl chloride. Such The metal tile differs in an original stamping, externally it reminds skin. Do not choose for regions that are characterized by hot weather, cover a very dark color, because the original tone can fade.

Such coatings look very similar to clay tiles, they have a matte texture. When creating metal Cloudy uses a special modified polyester: it is applied in several layers.

Such a metal tile perfectly imitates a copper coating. Material Agneta manufacturer created with Tata Steel and AkzoNobel. Coverage is two sided: inside - 25 microns, outside - 30 microns.

All coatings are created taking into account operating and climatic conditions. Since the range of metal tiles "MetalProfil" is very wide, you can choose an option that will make your architectural ideas into reality in full.

You can find out the detailed installation instructions for metal facing by watching the video below.