Features of use and range of radiators Sira

As soon as the cold season comes, the owners of cottages or their own apartments are seriously beginning to think about improving their heating system, making it much more efficient, while significantly reducing operating costs. The easiest way to this upgrade can be installation in the rooms of modern radiators.

Nowadays, you can find a lot of companies that produce equipment for heating. One of the most famous leaders in the production of heating devices is the company Sira Group. This company from Italy produces such devices that fully meet the existing international standards, stand out for excellent quality and are easily installed with their own hands, and their cost is completely democratic.

Bimetallic devices for home heating from Sira - the best choice to change outdated cast iron appliances. This is an extremely successful and most suitable symbiosis of advanced materials and innovations. These are products that will last as long as possible and will fulfill their intended purpose at a high level.

Simetric bimetallic radiators of two types of metal are produced. The most commonly used steel and aluminum. Steel with a thickness of 2.5 mm allows these products to work even in such heating systems that have a rather high pressure (about 40 atm). And also it is internally treated with a special composition that protects the metal from rust.

As for aluminum, even after prolonged use, it will not lose its operational and external characteristics. Aluminum shell, capable of transferring heat to the air in the room, is produced in such forms that will ensure the highest quality heat transfer without unnecessary losses.

In the production of these devices, precise instructions and the latest technology are used, and for this reason, these batteries are characterized by a solid structure, robust design and efficiently transfer heat from the heat carrier to the air in the room.

The appearance of such products is very attractive, the devices you have purchased will look great in any modern interior.

Key features of Sira devices:

• have resistance to increased pressure - therefore, they are easily operated in systems of the centralized type;
• adapted to domestic operating conditions - the company has made every effort so that its products can be used even in the most difficult conditions;
• excellent quality of products - it was obtained due to special control over all stages of production.

Prefabricated bimetallic structures from Sira are a good choice for a modern house or an equipped apartment.

These radiators have many universal characteristics, due to which the popularity of batteries from Sira is growing more and more.

• Long term use due to the protection of all elements from corrosion and high pressure.
• The excellent degree of heat transfer is due to the selection of pipes from steel and radiator parts from aluminum alloy. Among the wide range of products, it is bimetallic ones that have an increased heat transfer and help to quickly heat up a room of any size.

• Essential warranty period.The company promises that its devices will last at least 20 years, without losing any of their quality characteristics.
• You can always choose the number of sections you need.
• Catchy design and unique shape of products.
• High-quality durable coloring.
• Easy installation of batteries.

As a minus, many consumers can name only non-standard sizes of certain models: they are significantly shorter than conventional devices. These radiators have no more shortcomings.

Sira company offers its customers extrusion products and cast aluminum devices, electrical appliances and bimetallic radiators. In total, Sira produces more than 30 types of devices.

Aluminum alloy structures are produced in an Italian factory, and at the same time specialists use a technology called extrusion. This means that all sections of the battery are made by casting metal, this process takes place under very serious pressure. The product can withstand high pressure up to 30 atm during operation. These devices have an affordable price, excellent quality, and their material is fully adapted to domestic realities.Their advantage is considered to be simple installation, cost-effective and stylish design.

Products are coated with a composition with special components that are resistant to the formation of rust. The products have a power of 240-430 W, they are delivered in an assembly of 2 to 6 sections, and they are referred to the group of extrusion products. These batteries are up to two meters in height, which meets certain expectations in decorating some modern homes.

The devices are of the casting type, suitable for operation in conventional heating systems with very low temperatures. Used to work with various panels. Available in the form of a bend without sharp corners, heat comes from three outlets, which guarantees maximum comfort in the room.

A series of data of bimetallic type constructions - the most popular low-end models. True, they will have low performance, and this is worth remembering. The power of one section will be 92 W, and the pressure - about 30 atm. The height of the product is 275 mm, width - 80 mm, and the distance between the sections themselves will be 200 mm.

Gladiator stands out with its unique design, which by its design also increases heat transfer. This product is extremely popular among customers - it is the most versatile and easy to use.Sira Gladiator easily connects to any modern home heating system. The working temperature of the model is at least 120 degrees.

A series of small-sized batteries, which are also installed in small rooms. These products are produced most often exclusively and only with even sections. The product has a heat transfer of 142 W, as well as 40 atm of pressure during operation, 300 mm is the distance between the axes. RS models are the most convenient and most affordable.

This series is one of the newest varieties. So far, there is only a single model - Concurrent 500. It comes with a ribbed structure. It can be used in various systems, can withstand up to 110 C. Thanks to non-welded seams, devices are not afraid of pressure up to 170 atm.

The most demanded mark from bimetal, as the structures have standard parameters, and they can be mounted in all buildings. In stores you can find batteries with the number of sections 4, 6, 8, and so on up to 12, you can easily find 10 sections and 20. Pressure is about 40 atm, high-quality heat dissipation is 200 W, the type of connection is side.

The device will allow to mount it where there are low window sills, as its height is only 372 mm.Heat transfer of one section - 142 W, diameter 300 mm between the axes. The product is used in systems that are filled with antifreeze, which is produced specifically for filling these systems.

Bimetal devices are hybrid-type products that have an autonomous power supply system from heated water and electricity. The heating component is housed in a heat radiating case. When the boiler is running, the battery itself will be operated in a special “bimetal” mode. If the heating system is turned off, you can connect the device to the mains, the thermostat will help to adjust the economical consumption of this resource. These products will help to create the best microclimate in any of the rooms in your home. They have the highest heat output - 1200-2100 watts. Consumer reviews about this model are only good, they are extremely popular, although they have a high price.

Another successful idea of ​​the Italian company. These products have combined a number of innovations in the field of climatic instrumentation. For the complete sealing of existing seams and joints, a special material is used, which prolongs the life of the structure.The devices of this model are produced by the already known method called “extrusion” of the most proven materials. Suitable for lines with a coolant that has a temperature up to 110 ° C. The shape of the product is harmonious, and it itself is covered with excellent enamel, which is not afraid of wear.

A completely new line of electrical appliances from Sira, high-performance products that are made according to modern technology. Onice is an all-aluminum, innovative radiator that uses electricity but consumes energy economically and with a high level of comfort.

The technical characteristics of heating radiators made of bimetal of the Sira brand are described in some detail by the manufacturer in the instructions; therefore, it is quite simple to calculate the necessary number of sectional radiators.

You just need to know:

• What is the power of one section of the product - it is indicated in the instructions;
• What is the total area that needs to be heated - you just need to multiply the width of the room by its length.

Having specified these parameters, you can quickly calculate the total number of sections.

• The thermal power that is needed is calculated using a separate formula that looks like this:

100 W = 1 m2.

Hence, for 23 m2, 2.3 kW of energy will be required.

Now we consider how many sections of the radiator will need to be installed. Volumes of thermal efficiency in different models will also vary. For example, the S4 series will have a capacity of 210 W, and the Ali series represents sections with power from 150 W. For the first series, to heat a room of 23 m2, it will be necessary to have 11 units of sections, in the second case - 15-16 units.

• Calculate the desired number of radiators themselves. Sira sells devices from 4 to 15 units of sections. Indoors it will be possible to install either one product with 11, or 2 products of 6 units of sections - as you prefer.

Bottom-connected Sira products are a quality device, with thread connectors for connecting to the pipeline located below. The number of sections and the height of the products are selected depending on the thermal power that is needed to heat the entire building. The product can be mounted in cottages and high-rise buildings.

In addition to the devices themselves for heating, Sira also produces components that will be necessary for the high-quality installation of appliances.Combining sections is carried out in the factory to ensure complete tightness of devices. If leaks occur, you can buy a special repair kit.

At installation of the battery it is necessary to follow certain recommendations.

• The brackets must be mounted horizontally. You can allow a deviation, but not more than 0.1 degrees. You can not mount the radiator close to the wall, it is necessary that the air behind it could easily circulate.
• It is worthwhile to put the shut-off valves on all the instruments for heating in the house so that if the instrument breaks down, it can be dismantled without stopping the operating system.
• The thermostat must also be installed on all instruments of the system. The valve for adjustment is fixed on the coolant pipe itself. It is installed on the battery using a separate adapter.

• Special plugs for batteries are installed after connecting the products to the system. In the case of the usual model there are 4 special holes for speedy connection.
• After installing the battery, there are 2 inlet channels. Ideally, a Mayevsky faucet will be inserted at the top of each device, which will remove air traps.
• Collection of sections is carried out only in the factory workshop. Self-tests of such a plan will lead to subsequent denial of service under warranty if necessary.
• Technical connection is carried out by employees of the company that sells radiators and is licensed by the manufacturer. Then the warranty will continue. For installation work use special seal rings.

Overview of Sira radiators - in the video below.