80 liters Ariston water heater: instruction manual

Comfortable life of modern man can not be imagined without hot water. And public utilities are not very worried about its filing, especially in the summer. Therefore, everyone wants to take care of the welfare in his home. Currently, many people began to use water heaters. They are economical and practical. The most popular today are water heaters brand Ariston.

The main feature of the water heaters is the tank built in inside, in which water keeps the programmed temperature for quite a long time. This type of heater is suitable for people who often have problems with hot water.The most common is a water heater of eighty liters. It works on one heating element and has a power of 1.5 kW. Accordingly, the water to a maximum temperature of seventy-five degrees, he can warm up for three hours. This heater will be enough for a family consisting of three people. Model Ariston, having a capacity of 120 liters, has a capacity of 1.8 kW. As you can see, the entire line is very economical, but at the same time not very fast.

Of course, outwardly such a water heater only benefits from this, but ease of use is much more important. By the way, it is worth noting that the on and off of the boiler itself is also done with the help of a rotary knob. This approach to the design leads to the fact that in front of everyone there is only a light indicator and a thermometer. But, despite the minor flaws, all the equipment company Ariston, has many advantages. Water heaters are no exception to the rule.

• Stylish design will help to decorate any interior room.
• Each model is created by new technologies.
• Water heaters of this company have a long life. This is achieved due to the fact that the inner sides of the storage tank are covered with a layer of modern material that protects it from the appearance of rye and plaque.

• Supplied with dividers that prevent mixing cold and heated water.
• Ariston water heater with built-in temperature control sensors has protection against overheating. Safe use is guaranteed by a safety device that can be triggered by any voltage fluctuations. Even if there is no water in the system itself, then you should not worry that it will turn on itself, because it has special protection.
• Heaters from this company help save gas and electricity consumption. This contributes to thermal insulation, which retains water in a hot state for a long time.
• Many of the models are equipped with protection against the appearance of any bacteria. Thus, the water is already purified.

But when creating water heaters it is impossible to do without flaws.There are not many of them, and the main problem is that some structural details fail from time to time. Very often the magnesium anode breaks, and then the water heater must be handed over for repairs. And a safety valve may also fail. All this is quite expensive.

Ariston products can be divided into the following types:

• floor boiler;
• condensing boiler;
• indirectly heated boiler;
• the flowing water heater working at gas;
• gas storage water heater;
• electric heater having a cumulative function.
• a heater having a heat pump.

Such a water heater is different electrically heated. It has a tubular element of the heater, pressure type of tank, electronic control, vertical and horizontal installation, as well as wall mounting method.

This unit is slightly different from the previous model. In addition to wall mounting, here you can add mechanical control, as well as automatic on and off. The shape of the water heater is cylindrical.

If you do the abbreviation decoding, ABS means that it is a device that turns off the storage water heater in cases where there are surges. PRO means that the water heater has a cylindrical housing designed for vertical installation.

INOX means that stainless steel is used for the interior decoration of the flask, which will give a guarantee for a period of up to seven years. PW indicates that the water heater has an economical electrical unit and a half kilowatt, as well as supplemented by another one ten kilowatt. This, of course, gives a greater load on the grid, but at the same time, 80 liters of water heats up much faster.

The design of this model consists of stainless elements. On the electric cord installed protection system. But also this model has a fuse that prevents the heater from starting when the tank is empty. This is quite reliable protection against common breakdowns. The shape of the water heater is flat.TEN is made of copper of the highest quality. The power of this model reaches 2.5 kilowatts, so the wiring must match.

This model has a disconnecting storage device that allows you to leave the water heater unattended. And there is also an additional feature that provides anti-bacterial protection. Outside the tank protects the stainless steel layer.

Such a water heater has a power of up to one and a half kilowatts. The body is covered with stainless steel. The diameter of this model is only 35.3 centimeters, and from the inside the tank is covered with an antibacterial protective layer. This water heater does not take up much space and will save energy.

This model has a rather narrow cylindrical shape, so the water heater can easily be installed in any place. It is controlled electronically. On the one hand, this is very good, but on the other hand, if the system fails, you will have to reconfigure everything in a new way.

The water heater consists of a mechanical thermostat, besides it has a magnesium anode that protects it from various bacteria. The heating adjustment is located outside, not inside. Pleasantly pleased that this is the most economical model.

Such a model has a very narrow shape of the water heater itself. Complementing such a simple and uncluttered design is all the necessary protective systems. And it is also economical in terms of electricity consumption.

This type of heater is perfect for both the kitchen and the bathroom. It has all the protection systems, its design includes an additional heating element that allows you to more quickly cope with the heating of water.

A rather convenient cylindrical shape allows you to install a water heater in any corner of the room. It is the most affordable option and has a diameter of up to 350 millimeters. Heats up quickly, has all kinds of protection, it includes a safety valve.

Any water heater that seems, at first glance, simple, has a simple and internal structure. Its dimensions can be both cylindrical and flat. Any water heater consists of:

• boiler, that is, the internal tank;
• the body, which is framed by a boiler;
• Heater heating water that entered the tank, there may even be two, which contributes to the rapid heating of water;
• a layer of insulation between the body and the boiler, allowing the water to stay warm for a long time;
• branch pipe with a divider;
• magnesium anode, which prevents the deposition of mineral salts on the walls inside the tank;
• voltage indicator;
• thermostat;
• thermometer.

To make the correct installation of the water heater, you must strictly follow the instructions. Her reading will help not only to study all its subtleties, but also to extend its working condition.

• Before starting work, you should first choose the place where the water heater will be installed. It should be close to the bathroom or shower, so that heat loss is not large.
• Next, you will need to ensure that the tank is filled with water when turned on and off.The first inclusion must occur with a full tank.
• When the heater is already connected to the network, temperature indicators should appear on the control panel. The manual states that if the numbers flash, it means that the water heater is still in the off state. To enable it, you must press the on / off button, which is in the upper left corner.
• On the remote control is a button that sets the power. It regulates the power of voltage from 1500 to 2500 watts.

• The temperature can be adjusted using the button that says plus and minus.
• After installing the program, the water heater remembers it and works in the already specified mode. If the boiler was turned off, the settings are automatically reset.
• If any batteries are damaged, they must be replaced. You need to buy them from the same manufacturer as the water heater.
• Planning to not use the heater for a long time, especially in winter, it needs to be prepared for the "stagnation". To do this, drain the water, leaving it empty.
• From time to time it is necessary to clean the water heater from the inside from dirt.To do this correctly, you need to have certain skills. Therefore it is worth contacting specialists.

• The connection work should also be entrusted to specialists. You must first carefully examine the safety valve. He should not have any flaws. If they are available, it is necessary to replace the part that is damaged.
• And also it is worth checking whether the grounding is working.
• At the end of the manual, a very good function is mentioned that protects the water heater from bacteria. Since a hot environment is a great place to breed. When it is turned on, the heater will raise the temperature to more than 65 degrees, which will not allow bacteria to exist. This function needs to be enabled once a month, this will already be enough.

When buying a water heater Ariston, you need to know which of its places are the most vulnerable. The first is the thermostat, gauges, heating elements, switches. But also very often repairing insulating gaskets and valves.

If the water heater is handled carelessly, the integrity of the tank may be affected. And it is repaired only in service.To identify faults in a water heater, you need to understand whether there are changes in its work. This can be a strong hiss during work. And also often the period of heating water increases significantly. A sign of a breakdown may be the fact that the device turns on and off quickly or the lights often flash.

In order not to contact the service center if there is a slight breakdown, you can make repairs yourself. This is done not so difficult. First you need to de-energize both the device and the whole room. Then you need to drain the water. This is done with a hose having a diameter slightly smaller than the hole intended for the discharge of fluid. A cream hose should be put straight into the toilet. Next, shut off the flow of cold water. Then you need to disconnect the hose from the valve with cold water.

This hose must be connected to the faucet and also lowered into the toilet. Next, disassemble the water heater and remove the heater, which is mounted on a nut with a plate or washer. Stretching the heater, you need to very carefully inspect the places where there is scale. Where it is available, it is necessary to clean it, but very carefully, so as not to harm the tank. After the scale is removed, you need to pour the tank with clean water. If the heating element is in working condition, it can be cleaned in the same way. After that, in reverse order, all hoses and spare parts of the water heater should be installed in place.

To determine the choice of Ariston water heater, you need to know what should be the "ideal" boiler, and look for these particular functions and characteristics in the descriptions.

• The water heater should have a magnesium anode, which protects it from scale and prevents corrosion.
• Equipment with a vertical design is much cheaper than a version in a horizontal version, which is important for those who have savings in the first place.
• Those water heaters that are made of stainless steel or titanium will last the longest. However, their price is higher.
• It is necessary that there is a bypass valve, which is necessary to relieve excess pressure, which occurs as a result of the difference in the coefficients of thermal expansion of metal and water.

Water heater Ariston volume of 80 liters will comfortably equip a country house or apartment. It is easy to use and receives mostly good reviews from customers. In addition, its connection can be made independently, if you carefully read the instructions. But when installing the heater with your own hands, you need to remember that the further operation of the device largely depends on the correct installation. Therefore, it is better not to save on installation, and invite experts. This will help extend the life of the heater, as well as save the host’s nerves.

How to install Ariston do it yourself, see the next video.