Lineup of Thermex water heaters

Modern living conditions are difficult to perceive without basic comfortable communications, one of which is the supply of hot water. There are many types of water heaters - gas, electric and wood. Recently, preference is given exclusively to electric water heating. Leading the line in the Russian market is a large concern Thermex, which specializes in the production of domestic water heaters.

Italy has become a country producing Thermex products.For almost 70 years, its release has been engaged in the eponymous concern. Consider what is the secret of the popularity of the product of this brand. Official goods are sold in 160 countries around the world, and demand is growing every year, which can be considered an indicator of high quality and unsurpassed performance. Another important characteristic of Thermex is considered to be exclusively engine assembly, the quality of which is monitored by high-class specialists.

In addition, the electronic installation of a well-known company has several positive characteristics.

• Reliability, which is peculiar to foreign production. You will not encounter problems on use.
• Durability - in the manufacturing process, manufacturers prefer containers resistant to corrosion phenomena and copper heating parts, which extend the functional cycle.
• An interesting design - according to the specialists of the plant, the unit must stand out not only uninterrupted service, but also a beautiful appearance.The result is elegantly designed electric heaters.
• The high speed of heating is the great merit of powerful heating elements that reduce the waiting time for heating a liquid.

The concern is considered to be one of the three global manufacturers of household heating appliances, the annual volume of which reaches 2 million units.

In fact, all such blocks are divided into flow and storage.

The action of the former is based on the heating of the fluid during its entry into the node. As a result, you can get a stream of the desired temperature. Accumulative imply an iron tank, where liquid is collected, preheated before use. Between them there is a fundamental difference: the flow system is a construction with a small size that does not occupy a large space and is fastened with a pair of self-tapping screws.

The storage device is a tank with liquid, which must be well attached to the wall or ceiling. In the issue of energy consumption, their use will be more economical due to the fact that flow-type units consume a lot of electricity.

Currently, the model range is represented by four types of electric devices designed to heat water.

The most popular among buyers. There are 11 varieties from the Italian manufacturer on the market. The most budget option refers to the model range of Champion and Champion Slim.

Champion consists of 13 models with a volume of 10-300 liters, Champion Slim - 7 units designed for 30-80 liters. Both rulers have a cylindrical shape and a steel tank with stekloparaforovoy enamel inside. They are characterized by a classic common device and the most necessary set of automatic functions.

Thermex Sprint is equipped with enamelled steel tanks that hold 30-100 liters and have a rectangular shape. But also the equipment is equipped with a high-speed mode of heating.

The remaining model lines in the amount of eight, are equipped with tanks, the manufacturing material of which was stainless steel.

Suitable for installation in the apartment or in a private house.They are perfect for those who do not have the need for frequent use of hot water. The device starts operation after opening the tap. If it is closed, then there is no electricity consumption, and it is saved: the boiler will constantly expend energy to maintain a given temperature.

The Thermex brand offers two models:

• Stream (six instruments having a power of 3.5-7 kW);
• System (six devices of 6-10 kW), rectangular, suspended.

In the Combi series, customers can choose 6 indirectly heated boilers., built-in heating elements, which is used for heating when the boiler station is turned off. The minimum volume of capacity is 80 liters, the maximum - 300 liters, in the outdoor version, a cylindrical shape, with a capacity of 1.5-3.5 kW.

They are available in three modifications, are made in a teardrop shape and are hung on the wall.

The heat transfer level for all is 2.5 kW, the minimum water capacity is 10 liters, the maximum is 30 liters.

Making a choice in favor of the Thermex water heater, you will be able to find exactly the device that is ideal for you. In small apartments, you can install small models of the HIT series, which have a small water capacity (within 10-30 liters).All products are made in case-squares and equipped with biofix glass porcelain protection.

Before installation, you should study the characteristics of all components of the electrical device.

• TEN is a tubular heating element. The time required for heating water is directly proportional to its capacity: the more power, the faster the heating process. However, keep in mind that failures in this case happen more often.
• Thermal sensor - a temperature regulator of water inside the storage tank. In various modifications of the boiler it is installed in the form of a standard scale with an electronic indicator arrow.
• Hoses for draining hot and cold water. Some models have an additional pipe to drain the liquid, if you need to flush the storage tank.
• The thermostat is a capillary, rod or electronic device that is needed to automate the heating process. Thermal sensor after determining the temperature of the liquid in the tank turns on or turns off the thermal relay, activating or deactivating the heater.
• Insulation - sealing gasket that prevents leakage at the junction of the tank with the heating element. Requires frequent replacement due to the short service life of this part.
• Tank - a storage tank, the production of which uses stainless steel, having a plastic, metal, enameled outer casing.
• Magnesium anode - the rod that protects the heating element and the entire container from corrosion.

The outer side is equipped with a thermometer and a control panel, which, when assembled, is placed at the bottom, on the right, or on the outside.

Thanks to the indicator lights provided on the dashboard that shine as the fluid heats up and goes out after the process, users will know when they can open the hot water tap.

The safety valve eliminates the possibility of a return water intake, which is possible if the pressure level in the pipeline drops.

After purchasing the Thermex heater, the owner will have to install it correctly. Having finished with the choice of a place for the equipment, carry out two branch pipes for hot and cold water supply, make high-quality wiring and prepare an outlet having a grounding contact. When placing it, keep in mind that if a water leak occurs, the socket should not be in the place of flooding.We recommend placing the nest in some distance from the unit.

To hang the boiler on the wall, you should take care in advance of the purchase of the mounting kit. To connect the installation to the water supply you need:

• 2 ball valves;
• 1 tee;
• 1 safety valve (if it is not in the set)

Upon completion of this operation, connect the device using the standard circuit.

In the case of instantaneous water heater, the connection instruction looks like this:

• Fill the device with water before use, as it is forbidden to turn dry;
• To do this, open the hot water tap, then - the cut-off ball valve located in the strapping of the device;
• When a liquid from the tap appears, turn it off, insert the plug into the cartridge and perform a test run.

Included with each heater is attached instructions for use, where you can learn how to properly use equipment and rules for safe operation.It is necessary for the proper installation and activation of the device, the detection of faults and the adoption of measures to eliminate them. Each model has its own instruction sheet.

What you can learn by reading the manual:

• data, which describes the equipment and technical characteristics of components;
• the process of properly installing the device;
• how to maintain the unit during its operation, preventive measures, repairs;
• safety rules during operation;
• disposal of used parts.

Manual prohibited:

• connection to the electrical network until the tank is completely filled with water;
• use of the boiler in the absence of grounding;
• the use of water in the process of cooking;
• discharge of liquid from the tank when switched on;
• connecting if there is no safety valve;
• Removing the protective cover when turning on the outlet in the plug;
• connection to the water supply system with a pressure exceeding six atmospheres;
• filling the tank in case of saturation with suspended particles (sand, rust, etc.)
• use of removable components and spare parts of poor quality.

The manual describes the signs and symbols of the dashboard buttons in Russian. You will learn what damage can be fixed warranty service. Warranty from the manufacturer one year uninterrupted operation of electrical components, up to 94 months - housing and tank.

During the use of the unit, the heating elements over time become covered with salt deposits that interfere with the heat exchange process. Despite the presence of a filter that is installed in front of the inlet of the supply fluid, one can observe an accumulation of sediment on the walls of the internal tank. There are breakdowns of relays and sensors.

When there is a need for repair work without the inclusion of technology:

• long process of heating fluid;
• appearance of extraneous sounds in the tank;
• frequent activation and activation of the protective system;
• change in the quality of hot water;
• unit does not heat water.

You can independently replace and clean the heating elements, flush the tank. If there are any malfunctions in the operation of the control unit, contact the specialists of the specialized center.

First of all, de-energize the installation in order to carry out any repairs. Then empty the tank by draining the water through the faucet, supplying air to force the liquid out of the flasks.

Replacing the thermal component or descaling is carried out after dismantling and turning the tank. Take a picture of the connection order, so as not to forget how to properly assemble the installation. Remove the heating element to clean or replace it.

In the event of a replacement, keep in mind that the heating elements of the Thermex water heaters are used according to the brand and the manual. Most samples have a pair of heating components, the number of magnesium anodes should be similar. At installation of TENA do not allow a distortion. Keep clean seals, cuffs. Flanges are mounted in a cruciform pattern.

If the water used is characterized by increased rigidity, a tank drainage process should be performed frequently and sediments should be removed from both the heating parts and the bottom.In the presence of scale on the walls of the boiler last contribute to the creation of an additional insulating layer, which does not interfere with the heating process. Release the dismantled and working component from the residue of scale and check the anode operability. If necessary, replace it with a new one.

Magnesium anode protects the heating component from destruction. The presence of loose sediment indicates a decrease in heat transfer and excessive consumption of electricity.

Thus, the process of descaling is divided into 3 stages.

• The first is to prepare the boiler for cleaning. Disconnect the unit from electricity, turn off the water supply, empty the storage tank, disconnect the wiring and remove the heater.
• At the second stage, the apparatus is cleaned. Solid deposits, dirt, debris should be removed from the tank and the walls should be flushed using warm water. To better clean the surface, you can use the chemical composition or a solution of acetic acid in the ratio of 25 ml of vinegar to 10 liters of water. It is necessary to rinse the surface of the inner walls of the tank with the resulting liquid mixture. At the same time you need to put the heater in the tank, where the cleaning solution is added.After dissolving scale, remove the part.
• In the third stage, collect all parts of the boiler. Rinse the tank with the heating element with warm liquid, wipe, collect and connect the assembled unit.

Water heating equipment in most cases flows for two reasons:

• deformation of the sealing lining;
• damage to the internal storage tank.

To eliminate leakage during deformation, simply drain the liquid from the drive, remove the damaged component and replace it with a new one.

To solve the problem of leakage of fluid caused by the reservoir, you should purchase a new boiler. In this case, the repair of the tank will not bring the expected results. In addition, at home to remove the tub without damaging the external case will not work.

Fine welding will return the integrity of the apparatus if the material for the production of the tank was stainless steel. With plastic or glass-enamel coating, welding work will damage the outer coating, and further recovery will be impossible.

The most common errors are:

• E1 or Vacuum - by this encoding it is meant that the water accumulative capacity is not completely filled with liquid during heating. To fix the problem, you need to turn off the heating spare, wait until the container is full, and then reconnect the device to the network.
• E2 or Sensor - problems with thermal sensor. It is necessary to turn off the boiler for half a minute and make a full restart.
• E3 or Over Heat - Critical mark of heating temperature (above 95 degrees). It is recommended to press the button to turn on thermal protection.

It is not surprising that customer reviews are positive and negative. Even a world-renowned manufacturer can be awarded negative reviews. You can find similar reviews about Thermex electrical heating equipment. In practice, negative comments often come from those who decided to install the unit themselves, but did not consider it necessary to familiarize themselves with the instructions for use and proper installation. As a result, the device functions incorrectly or fails at all.

Basically, flawless work for a long time is noted, providing hot water supply to users year-round.

As we have already noted above, all water heaters are divided into flow and storage.

Speaking about the advantages of flow-through heating units, the following qualities can be noted.

• Durable, wear-resistant copper heat exchanger, which is equipped with a heating tank. Due to the physico-chemical characteristics of copper, the period of service is unlimited.
• By means of a multistage protective system of the heating part, the switching on of the apparatus in the absence of liquid, overheating of the device, and low water pressure is eliminated.
• Temperature resistant plastic case protecting heat exchanger.
• High-end automation, which is equipped with devices.

• Due to the presence of the heating element Silverheat provides protection against bacteria, corrosion, reduces the time required to obtain hot water. Silver ions contribute to the purification of microbes, and also the heat-electric heater made of this metal has more protection against precipitation, which increases the service life.
• The technology of anti-bacterial internal coating of the biosteklafarfor tank (bio-glasslined) prevents thermal and water hammer and disinfects the liquid, which for a long time remains clean and fresh, as if in glassware.
• Biosteklarfarofovy layer applied to the surface of the vessel wall in the microenvironment with an inert gas. Due to this, the penetration of air bubbles into the layering is excluded, and the operation time and resistance to thermal changes increases.
• Detection of a manufacturing defect that is invisible to the eye, such as pores with air inside, by means of ultrasonic quality control of the storage vessel.

• The latest control mode (UZO) will automatically turn off the heater if an energy leak is detected or the device is connected incorrectly.
• The stainless steel of the device is welded using an electron beam in vacuum according to G. 5 technology, which gives the maximum resistance of welds to destruction and extends the life of the entire unit.
• Stainless steel austenitic structure with a large number of components that help strengthen the material. Tanks made of such material last longer than standard stainless steel tanks.
• The development of a Double Tank (double inner tank) is used for the construction of flat-plate heating in order to ensure durability and resistance to hydro and temperature changes.

• The heating equipment of a double look provides the accelerated heating.
• The introduction of a double magnesium anode increases the time of the unit.
• High-density polyurethane foam in thermal protection helps to better retain heat and save electricity.
• The electronics will turn off the device during overheating due to a thermostat having double protection.

Consider the small disadvantages of the cumulative type of device:

• periodic maintenance is required - replacing the magnesium anode, washing the inner surface of the tank, removing scale STENov;
• small amount of hot water.

Minuses of flow-through modification samples:

• equipment cannot supply hot water to several places at the same time;
• in view of the high power of the kit, the installation of automatic machines 40A and the installation of additional conductors from the shield is necessary.

You have learned a lot of information about this useful device. Finally, we have prepared useful recommendations from specialists that will help you choose a model of the desired volume and extend the work time.

Before you go to the store for the device, decide - how much volume you will buy. Important points when choosing will be the duration of heating and power consumption.

The required capacity depends on the needs in the acquisition of a water-heating complex. When buying a device to turn it into a backup source of water supply (if the central network was turned off), and also if rare use is planned, representatives of the model range up to 60 liters will be an ideal find.

What else should be guided to purchase the best device:

• the number of hot water users;
• the number of feed points;
• the presence of a bath or shower in the toilet room.

The necessary amount of water for consumption is influenced by the habits of family members: the period when the household uses the shower. The liquid is needed in the morning and in the evening: the required displacement will decrease, since in this time interval the installation will provide everyone with a sufficient portion of water. A large cubic capacity of a tub of 80-100 liters is suitable for the needs of residential construction of three or more close people.

Standard equipment is designed for 30-150 liters. A collection of 30-50 liters will be able to serve one point. You can install it above the sink. On sale are the machines of a larger water intake of 500 liters. They are mainly intended for production needs.

The nodes of indirect orientation of large capacity are connected to the heating network. Their power is enough for the sink, shower, batteries. Approximately 80–100 liters are enough for 2-3 consumers. But in order to make sure that the choice is correct, it is necessary to carry out mathematical calculations.

The volume for four people is calculated by the expression Р х (t ° - t1) / (t2 - t1)where:

• Р - necessary daily water consumption, which is required for daily use. To calculate it, think where you are spending the liquid. So, to rinse in the shower for 10 minutes, you need five liters. Therefore: 5 x 10 x 4 (number of residents) = 200;
• t ° - the level of heating of water from the tap at the exit, 38 degrees is considered optimal without the addition of cold liquid;
• t1 - level of inlet temperature: in the summer season it is equal to 16 ° С, in cold time - 9 ° С;
• t2 - the level of temperature heating, reaches 85-90 degrees.

It remains for you to use the substitution method to calculate the capacity of the vessel.

Products with dimensions greater than 150 liters are installed on the floor. To place it, you need to free up a certain area.

Do not forget that you will open and cold tap. To take a bath, you have to combine the cold with the hot stream to get a comfortable solution.

Flow-through unit is chosen in the same way. But the period required to prepare the liquid is considered according to another mathematical expression: Pm = Q / ((Tmв-Tхв) * 1.163).

• P - the level of water consumed;
• Q - the performance specified in the instructions;
• Tmv and Tkhv - temperature regime of warm and cold liquids.

Such calculations will guide the consumer to the appropriate size of the installation. And directly in the store, appreciate the design, build quality. Pay attention to bandwidth, protection system from the destruction of the coating.

Today, more and more people are striving to be independent of public utilities by installing autonomous water heaters. In this regard, consumer demand for Thermex products is growing due to ease of use, ease of installation.

How to install a water heater with your own hands, see the following video.