Technical characteristics of Atlantic water heaters

In homes that are not equipped with gas water heaters, it is customary to install water heaters. The most popular among buyers are heating devices of the company Atlantic. Consider the characteristic features of these devices, as well as examine tips on choosing the best equipment.

The trade brand Atlantic appeared in 1968 in France (this country is the official representative of the company), however, the company began to specialize in electric water heaters only in 1978. Thanks to a wide range of products, water heaters of this brand satisfy all the needs of consumers.

Today, Atlantic water heaters are made in various forms. Especially popular are heating devices of cylindrical and square shapes. They are most often installed in private homes and apartments.

The advantages of Atlantic water heaters are quite significant:

• protection against elevated temperatures and pressures in the tank;
• built-in ceramic dry heating element;
• rapid heating of water, due to the large heat transfer area;
• long time of maintaining high temperature of heated water;
• no risk of mineral deposits;
• easy disassembly and replacement (there is no need to release water from the tank to perform these manipulations);
• lack of requirements for frequent maintenance;
• long warranty period for equipment;
• ecological safety of heat-insulating material, which helps reduce heat loss;
• saving electrical energy, because the manufacturer guarantees minimal electricity costs without affecting the performance of the water heating device;
• the presence of several modes, which allows you to adjust the required level and rate of heating water;
• a wide range of products;
• strength of the body, which is provided by an enamel coating containing titanium and cobalt.

Among the minuses of heating devices, you can select only their great value. Nevertheless, due to a number of advantages, they are a more profitable choice (compared to other brands).

Atlantic water heaters are available in three basic versions.

• Classic - the most affordable version of the device. It consists of a copper heater and a magnesium anode, which is located in the tank and protects against corrosion.
• Advanced - more demanded model of heaters Atlantic. The package includes ceramic heaters and immersion heating element.
• Premium - electric water heater of higher cost, which is caused by the presence of an anode made of titanium, ceramic heating elements and a protective coating.

Consider also the most popular models of Atlantic boilers.

The model with a capacity of 10 liters has a barrel shape. The case of the device is covered with a protective glass-ceramic layer. Magnesium anode prevents rust on the welds. Devices are installed at cottages and in apartments during periods of disconnection of hot water.

Specifications:

• power - 2 kW;
• possibility of operation in conditions of high humidity;
• water heating - up to +65 degrees;
• pressure - 8 atmospheres;
• heating duration - no more than 20 minutes.

Model with a capacity of 80 liters (this volume is enough for a small family). The water heater has a ceramic dry heater. The inner surface of the water storage tank is protected by a layer of special enamel, which prevents the formation of corrosion. The wall mounted unit is installed in a vertical or horizontal position. Due to the thin elongated body, it does not take up much space in the room.

Specifications:

• power - 2.1 kW;
• heating level - up to +65 degrees;
• pressure - 8 atmospheres.

The model with a volume of 100 liters is resistant to corrosion, which is caused by a protective housing that protects the heating elements from moisture. The storage tank is covered with a durable glass-ceramic layer.

Specifications:

• heating time - 4 hours;
• power - 1,5 kW.

Model with a capacity of 80 liters. The water heater is mounted on the wall vertically. Equipped with a system of accelerated heating of water up to +65 degrees at a pressure of 8 atmospheres.

It has the following specifications:

• electronic control with economical use of electrical energy;
• anti-corrosion protection;
• glass ceramic coating storage tank;
• power - 2 kW.

Model with a capacity of 65 liters. It has a rectangular shape and is suitable for any room design.

Specifications:

• power - 2.25 kW;
• water heating rate - 30 minutes;
• corrosion resistance, thanks to which the boiler can be installed with high hardness of tap water.

Among other models, we highlight:

• Atlantic Round with a volume of 80 liters - a wall-mounted unit with a cylindrical storage tank.

• Atlantic Steatite Cube Available in cubic form. Mounted on the wall vertically or horizontally. Boilers have volumes of 30, 50, 75, 100 and 150 liters. Cost depends on the chosen model.

• Atlantic Steatite Exclusive - high-capacity electric outdoor water heater (200-300 liters). It is used both in life, and in the industry.

As well as any modern equipment, it is recommended to operate the heating device for water with observance of certain requirements.Due to this, it is possible to increase its service life and reduce material costs for repairs.

At the beginning of the installation process, the boiler should be hung to the wall at the optimum height. After shutting down the water supply system, you can go directly to the network connection. This requires compliance with some rules:

• pipes and pipes are joined by American women;
• crane for drainage is installed on the tee;
• A transparent tube is inserted into the fitting of the safety device and goes into the sewer system;
• if the pressure increases above the permissible cold water inlet, the pressure regulator should be installed;
• It is necessary to close the shut-off valves.

After installation of the water heater, it is necessary to open the tap for cold water supply, and then to open the shut-off valves in the input and output of the heater. Later, the hot water tap on the mixer opens and is held until water appears.

When you turn on the water heater in the network, you need to lay a separate wiring line by installing automatic circuit breakers. Also, do not forget about grounding, which is performed in accordance with safety regulations.

Before starting to operate the water heater, it is necessary to warm the water to the maximum mark. Then open the tap on the mixer and make sure that hot water flows. After this, the boiler should be carefully examined to detect leaks. If they are not found, then you can go to the direct operation.

You also need to carefully study the manufacturer's instructions. And after turning on the unit, it is necessary to set the required heating level. However, you should follow some recommendations.

• Do not start up the water heater with an empty tank; otherwise, a breakdown of the heating element can occur.
• The check valve at the inlet is recommended to check for serviceability at least once a year.
• Twice a month, the boiler should be turned on using the maximum capabilities of the device. The boiler in this state must be maintained for several hours.This helps to prevent the proliferation of bacteria.
• It is recommended to install a mesh filter element at the inlet of cold water for additional cleaning and desalting. Otherwise, the service life of the water heater will decrease.
• Once every few years, the heater must be descaled and the condition of the magnesium anode must be checked.

With the purchase of water heating equipment Atlantic It is necessary to adhere to certain criteria for selecting the optimal model of the device.

• Capacity of storage tank. For example, 80 liters of volume is enough for a family of 3-4 people. They can fully take a shower, however, only 2 households can take a bath. If there is a need to combine cleaning and washing, then you should opt for boilers with a capacity of 100 liters. Such volume will satisfy the most part of needs for hot water supply.
• Power. It is necessary to take into account the power grid. Water heaters with maximum power (2-2.5 kW) provide accelerated heating of water. If the wiring in the room is not new, then it is recommended to choose less powerful devices (up to 1.5 kW).This will avoid overloading the power supply network, but the rate of water heating will be greatly reduced.
• The quality of the heated water. When using water of increased hardness, minerals will be deposited on the walls and bottom of the storage tank, which will significantly reduce the life of the water heater.

After examining the positive and negative customer reviews, you can draw some conclusions about Atlantic water heaters:

• many consumers have noted intermittent failures of electronics and a decrease in the volume of heated water;
• fast water heating;
• long service life of the heating element.

For information on cleaning the Atlantic water heater, see the next video.