Oasis radiators: features and benefits

One of the important components in the heating system of an apartment or house is a radiator. Today, there is a huge selection of models on the market, but according to statistics, Oasis radiators are more preferable for consumers.

Depending on the engineering technology, heating radiators of this company are divided into sectional and panel. There is also a division depending on the material used.

Differ in rather good thermolysis in spite of the fact that slowly heat up. The efficiency is more than 80%. These devices are available in two versions - sections and pipes. Both groups have a rather high resistance to mechanical damage, as the surface is treated with a special layer for protection.Still steel radiators differ in the moderate price and laconic appearance.

Aluminum radiators of this brand are produced in two ways - casting and extrusion. In the first case, such a product acquires thicker and stronger walls, which has a positive effect on the service life. In general, the service life of such batteries ranges from 10 to 15 years due to a special protective layer that is applied to the external surface. They are produced by European technology, but adapted to our climate. Therefore, it can easily withstand the high temperature of both the working fluid and pressure.

They heat up very quickly compared to steel radiators and retain heat longer. Pipes from plastic and metal are equally suitable for such batteries. More of these products have a collapsible design, so there is a quick installation and disassembly. These radiators also have shortcomings, such as the softness of the metal,therefore, be careful when handling them. The need to bleed the air in the pipes regularly.

This type is produced directly from two metals: steel and aluminum. This feature allows you to significantly increase their service life. And also such radiators are not afraid of the highest temperatures and pressure drops. Another feature of the product is its composite design, that is, if you wish, you can add or remove sections, which is an undoubted advantage in our unstable climate. Bimetal radiators are highly resistant to chemicals and organic substances that can affect both inside and on the surface of the product.

The only disadvantage of such products is its price. - It is significantly higher than the cost of radiators made of aluminum or steel.

A heating radiator, or as they call it informally, batteries, is a device consisting of sections within which water circulates. The main country producing them is China, although the radiators of this company are found both Italian and Russian.

Most models of the Oasis brand are designed for high pressure in pipes and are distinguished by long pipelines.which is typical for our heating networks. Therefore, they are leaders in the domestic market.

Specifications of some models of radiators made of bimetal, aluminum and steel are significantly different. Thus, a model of bimetal 350/80 (6) can heat a room up to 10 m2, withstand pressures up to 30 MPa, and temperatures up to 120 degrees. This type of standard number of sections - six, but if necessary, they can be supplemented or removed. The size of the radiator is 413x80x 80 mm, so it will harmoniously fit into a room of any size.

In turn, the model of aluminum SV-500/12 can heat a room up to 24 m2, taking into account 12 sections in the radiator. Their standard number varies from 4 to 12 sections, the radiator is prefabricated. The pressure that this model can withstand, can reach only 10 MPa, and the temperature - up to 110 degrees. The dimensions of the model are 580x80x80 mm.

The steel radiator OV-11/3/04 has dimensions of 400x300x68 mm and is a panel option with a bottom connection. To warm the most efficiently, this model can cover up to 8 m2, and withstand pressures from 10 to 16 MPa. The temperature that a steel radiator withstands is usually 100–120 degrees. Knowledge of the technical characteristics and features of the radiators of this brand will allow you to make the right choice, but it is worth considering a number of other nuances.

Choosing Oasis radiators for residential premises, you should pay attention to the following aspects:

• Type of construction. If you intend to install the radiator in a private house with an individual plumbing, then you can opt for steel models, since the radiator of steel is susceptible to various chemical elements in the working fluid. If radiators are installed in an apartment, then bimetallic or aluminum models will be the best option, as they warm up faster and keep the heat longer. For heating a small room in some cases suitable oil radiator company Oasis, with which the room quickly warms up.This option is suitable for cottage or in the season off heat.
• Pressure directly the products themselves must withstand, and it is better to exceed the pressure of the entire heating system. Thus, in high-rise buildings of old construction, the pressure is from 5 to 8 atm, in houses of the new layout this figure is 12–15 atm.

• Resistant to water hammer. This is especially true for apartment buildings, where the pressure in the system is often unstable. It is better to foresee this situation in advance and choose a reliable model.
• Resistance to working fluid. As a rule, water with an admixture of chemical substances flows through the pipes, which may improperly affect the service life and the appearance of the product. Therefore, you should choose a radiator with a protective inner and outer layer. It should also take into account the thickness of the walls of the battery, so that the particles of abrasive substances could not wipe the surface.
• The time of heating and cooling batteries. The best option for residential premises is fast heating and slow cooling of radiators. In this case, the undoubted leader is bimetallic products.

• Design. You shouldn’t bypass this aspect because a concise and compact radiator is needed to harmoniously complement the rooms. Oasis models, according to reviews, will fit into any interior, as they are perfectly white in color and small in size.
• Lifetime. This factor is one of the most important in making a decision when purchasing. When purchasing a radiator, most expect to mess with the assembly and disassembly of the product as little as possible. Oasis models have a rather long service life and guarantees, which undoubtedly pleases buyers.

In the next video you will find an overview of the budget oil cooler Oasis OS-15.