Frameless glazing of the veranda and terrace: the details of the process

Frameless glass began to be used in the seventies in Finland, but has been successfully used in our days. Currently, this system has gained wide popularity around the world. Today, the process uses the latest technology and modern high-quality materials.

Frameless glazing has been widely used due to the fact that it can be used in most of the premises in which the windows are located, both in cottages and private houses, and in summer cottages. Installation of glass by this technology can be carried out on balconies, verandas and terraces.

Glazing without frames is being used more and more often, it is recommended to carry it out with the help of professional craftsmen, but it can also be managed on its own.

Frameless glazing is a single coating based on tempered and very durable glass. It has a different thickness, which should not exceed 10 millimeters.

In addition to special strength, it is necessary to note the thermal safety of the glasses used in the process. After glazing without the use of frames, the consumer gets a flat surface without defects and distortions.

In this case, the glasses are located as close as possible to each other and are connected with a special sealing layer. This layer helps to achieve tightness at the joints, gives additional strength, eliminates the penetration of dust and moisture inside.

Sliding doors are moved using aluminum guides that are mounted above and below the glass. In some cases, models may be presented in which the flaps are folded.

High-quality installation and installation - a mandatory component of frameless glazing. Only with a competent approach to these processes, the result of the work will delight the consumer over a long period of time.

First of all, it is necessary to fix the upper ebb and attach the upper profile of aluminum. The next step is to properly install the ball bearing system. They are located in the upper profile and hold the double-row rollers.

After that, when using a silicone sealant, a glass profile is installed at the top. Next come the glass panels. The profile from glass is placed, it is processed by a sealant, the lower aluminum profile is mounted.

The design must be fixed on the fence of the lower ebb. After that, with the help of a sealant, possible gaps are eliminated, the joints are coated.

In some cases it is possible to use monolithic polycarbonate. It is cheaper than quenched glass. Guide profiles also have a fairly high price, but replacing them with similar and non-glazing elements will inevitably lead to a loss of quality at the end of the work.

When working with a terrace you need to remember that the recommended glass thickness should be 10 millimeters, the height of the valves - 3 meters. In general, the design looks like a glass wall with a leaf that will turn. This leaf acts as a door and is equipped with a handle and a locking system.

Glazing cut frames can be done with your own hands. In some cases, the consumer can replace basic materials with similar ones.

When using not tempered glass, but polycarbonate on the terrace, some conditions must be met. The upper cut-off area is covered with a special film, and openings are left around the lower perimeter for free water to avoid material clouding. When attaching sheets, it is recommended to use a thermal washer, and to protect the edges of the canvas - rubber linings.

If a transparent roof is intended, it is also made of polycarbonate. This will make the whole room light and airy.

The use of frameless glazing gives the room an open, stylish and elegant look. When used on the veranda, it is possible to open its windows entirely.At the same time the technology is absolutely safe.

The leaves are fixed with the help of locks, which means that the possibility of their free opening is excluded. Durable and thick glass can withstand quite serious loads, protects the room from moisture, dust and wind. In addition, the system does not cause difficulties in maintenance and operation, is easy to clean and has a long service life.

Due to the size of the glass room becomes more open and bright. With a possible damage to the glass, it does not break up into fragments and it is impossible for them to get hurt. In addition, the market offers various options for the form of glazing, so you can make your version of the veranda non-standard.

Among the shortcomings can be noted that the glazing will not affect the temperature in the room. In addition, the tightness of the structure does not imply its noise isolation, and this means that it will not be possible to protect against noise coming from outside. The system does not assume a mosquito net. And, finally, frameless glass - an expensive procedure.

Verandas and terraces with frameless glazing do not cause difficulties in the care and maintenance.Once a year they are recommended to be treated with silicone spray.

In order to prevent defects and scratches on the glasses, they cannot be cleaned with newspapers. This method, although it can be quite effective when cleaning, however, over time will inevitably lead to the appearance of damage on the surface.

Frameless glazing is gaining all the great popularity around the world. It is used in apartment buildings, private houses and country houses, in cottages and in summer cottages. Why are consumers increasingly using this technology?

First of all, the protective function of this system is noted. In areas with an unfavorable climate, where frequent precipitation and strong winds are observed, unframed glazing can be an indispensable aid. It protects the room from the penetration of dust and dirt, moisture and exposure to various weather conditions. In rooms bordering the veranda, condensation and mold are often observed. With frameless glazing, this problem is easily solved.

In addition, the appearance of the veranda or terrace becomes more stylish and modern. The space is visually expanding, and the joints between the panes are completely invisible, which creates the effect of a glass wall.

The latest technologies and modern high-quality materials used in the process of work guarantee durability, reliability of the design and long service life. Glass is resistant to external influences, it is difficult to damage or break it, and the closing mechanism helps to protect the structure from breaking.

When breaking glass, it crumbles into cubes that cannot be cut, does not have sharp edges and fragments. This ensures safety for the consumer even in case of emergency situations.

It should be noted aesthetic function of frameless glazing. The room becomes bright, looks modern and original. The undoubted advantage is that the technology can be used in most rooms that have glass. The main thing is to comply with the technology during the installation of the structure and take into account all the features of this method.

For tips on how to choose frameless glass, see the next video.