Use of soundproof material "StopZvuk"

Low noise insulation in the room is a fairly common problem. It is impossible to establish absolute silence in the house, but it is quite possible to reduce the noise level to the optimum value. In the modern construction market a wide range of sound-proof products is presented. In this article we will discuss the use of the material "StopZvuk".

"StopSound" is a small insulating plates, which are made on the basis of basalt fibers of various lengths. Such fibers are obtained by melting minerals of natural origin. It should be noted that plates of basalt fibers are not only able to prevent the spread of sound, but also have insulating properties.

In the modern construction market, you can find a lot of modifications soundproofing "StopZvuk". Characteristics of the material depend on its manufacturer and technologies that were used in the production. Plates can have various sizes, thickness and purpose. There are both versatile materials and variants designed for certain surfaces and structures.

The system "Stop Sound" is suitable for use in residential, industrial and office premises.

Modern manufacturers of building materials produce several modifications of this system.each of which has its own scope of application. Basically, the plates are used as a middle layer in frame noise insulation structures. Customer reviews speak of the high quality of the StopSound soundproofing system, which is not inferior in its characteristics to such popular materials as Schumanet and Vibrostek.

Sound insulation material "StopZvuk" is classified depending on the composition and technology used in the manufacture of plates.Each subspecies of basalt fiber-based slabs has its own technical and physical parameters. Consider the main types of material in more detail. "BP Prime"

For the production of plates "BP Prime" uses the highest quality basalt fibers. The material is used for sound insulation of walls and ceilings with a suspended or tensioning structure.

The advantages of such panels include:

• resistance to mechanical stress;
• resistance to temperatures above 1000 degrees;
• health safety;
• resistance to deformation.

Also material:

• not subject to burning and melting;
• does not absorb moisture;
• not afraid of mold and mildew.

Panel thickness is 27 mm. Most often, the material is produced in packs of 6 kilograms each with panels of 1000x600x27 mm.

Standard slabs are made of basalt fibers obtained by melting basalt and passing it through specialized equipment. Only long fibers are used in production, due to which the product is highly resistant to mechanical loads. The material is suitable for sound insulation of all standard designs.

The versatility of the panels due to the high technical characteristics:

• high strength;
• resistance to high temperatures;
• moisture resistance;
• resistance to aggressive chemicals;
• resistance to the formation of fungal formations, insects and rotting;
• low thermal conductivity.

Modification "Premium" is made of high quality basalt fibers. The role of the binder component is aluminum oxide. This material is environmentally friendly and completely safe for health. In addition, the plates are not subject to burning.

The product has excellent technical parameters, which indicates its high quality:

• plate density is 60 kg / m3;
• the percentage of basalt fibers is not less than 90%;
• noise absorption coefficient is 0.95;
• plate thickness is 5 centimeters.
• High-strength slabs can be used for soundproofing the surface of walls, ceilings and load-bearing enclosing structures indoors. The panels have parameters of 100x60x5 centimeters and come in packaged 4 units each.

"StopZvuk-M", unlike other modifications, is not available in the form of plates, but in the form of a roll material.The material is a product of bitumen-polymer membrane, which is covered with a layer of needle-punched polyester fabric and film of polymers. Most often, the product is used for sound and waterproofing "floating floors". Fastens the material under the screed floor. When laying sound insulation it is necessary to glue the joints with a special adhesive tape.

The material is characterized by good elasticity, environmental friendliness and resistance to the formation of fungus and mold. The product is not subject to rotting, and is also characterized by a long service life. The product is produced in the form of rolls with a length and width of 10 per 1 meter, respectively.

Modification "Flor" is designed for sound insulation of floors in buildings for any purpose. This material is classified as fireproof, as it is not susceptible to burning. The product is resistant to the formation of fungus and mold, and also has repulsive properties for insect pests and rodents.

Eco noise absorbing system is made of polyester components.Polyester fibers are interconnected with hot air. Such harmful bonding agents such as phenol-formaldehyde resins, formaldehydes and adhesive mixtures in the composition of the material are absent. The plates are completely hypoallergenic and safe for human health.

The material is used not only for surfaces of walls, floors and ceilings, but also for insulation and sound insulation of roofing. Panels are issued by packing on 6 pieces in the size of 1200х600х50 millimeters. Installation of the material is based on the principle of fastening mineral wool. Plates are easy to trim with a knife. They are fixed with the help of dowels fungi.

Modification "Eco Slim" is different in thickness of the plates and materials used in the manufacture. The product is made on the basis of synthetic polyester fiber. Such fibers belong to the category of fireproof materials. Eco Slim panels do not peel off and do not emit prickly particles that irritate the skin, which facilitates work with the product.

Sound insulation plates are not subject to rotting, as well as the spread of fungus and mold. The material has a noise absorption coefficient of 0.75.It is produced in packs of 15 plates with dimensions of 1200x600x20 millimeters. Such panels perfectly are suitable when it is necessary to save the free space indoors. The product is used for finishing stretch and suspended ceilings, flooring on timber logs and walls in buildings for any purpose.

How to independently conduct sound insulation, you will learn from the following video.