Rommer radiators: what are they made of and what operational capabilities do they have?

Rommer is a manufacturer of heating radiators used to heat apartments, private houses, cottages or summer houses. The company produces various types of heating devices. They are distinguished by their material of manufacture, design features, technical characteristics and design. In order for the radiator to please the owners with uninterrupted work for a long time, it is important to responsibly take its choice.

All manufactured models of radiators Rommer are made in accordance with Russian State Standards and European standards. The products of this brand has all the necessary certificates confirming its high quality, environmental friendliness and safety.

Consider the main features of the heating equipment Rommer.

1. High thermal performance achieved by the special design of radiators and materials used. Thanks to this parameter with the help of heating devices it is possible to quickly warm the room.
2. High strength performance and resistance to power loads, causing the durability of devices.
3. Resistance to lime formation and clogging. Radiators "are not afraid" of inorganic inclusions and other chemical impurities in the coolant.
4. Low weight. The small mass of the heating equipment provides its facilitated transportation and installation.

Under the Rommer brand, dozens of models of radiators are produced. All the proposed devices are similar to each other: they have high working pressure, good thermal properties, modern design. They are also united by reliability, increased efficiency and long service life.However, such heating equipment has differences. It may differ in materials of manufacture, design and technical parameters. In addition, the batteries are manufactured using various technologies.

Rommer manufactures and sells aluminum, bimetallic and steel panel radiators.

Material production largely determines the advantages and disadvantages of heating devices.

1. Aluminum Batteries are produced by high pressure casting. This is one of the most popular types of radiators among consumers. Their main advantages include low weight, ease of installation and maintenance. Depending on the model, the device can be equipped with a different number of sections with different power ratings. Radiators may vary in size. The disadvantages include susceptibility to corrosion. Batteries quickly rust if the integrity of the protective oxide layer is damaged.
2. Bimetallic - heating equipment, for the manufacture of which alloys of steel and aluminum are used. Their design includes aluminum panels and steel tubes (manifolds),interconnected by welding. Such batteries are resistant to "aggressive" coolants. They are able to withstand a maximum pressure of 70 atm. Their disadvantages include susceptibility to rusting and high cost.
3. Steel panel - radiators designed for use in closed-type heating systems. Their design includes several panels of steel (from 1 to 3, depending on the modification), as well as vertically and horizontally located channels for heat carrier. In order to increase the level of heat transfer, additional steel fins are welded to the panel. These devices are able to withstand pressures up to 10 atm and coolant temperature up to 120 degrees. All the models proposed by the manufacturer have a flat design, low mounting depth. The disadvantages of batteries include the "fear" of water hammer.

The technical parameters of heating devices will determine how quickly they will heat the room.

The most important include several characteristics.

1. Operating pressure. The parameter on which will depend on how much pressure is allowed to operate the battery. Bimetallic models are able to withstand from 16 to 70 atmospheres, aluminum from 6 to 16, steel panel to 10.
2. Power. This parameter is measured in watts. The efficiency of heating devices will depend on it. The heat output of the section varies over a wide range (from 100 to 230 W). This indicator depends on the material of manufacture of the battery, its height and coolant capacity. All this information is indicated by the manufacturer in the passport to a specific model of the radiator.
3. Maximum temperature of the heat carrier. Aluminum radiators can withstand temperatures up to 90 degrees, bimetallic up to 120.

Before you buy a heater, it is important to know what you should pay attention to first.

When purchasing a radiator, the overwhelming majority of consumers place many demands on heating equipment.For many, it is important that the batteries quickly heat up the room, have a stylish design and at the same time be inexpensive. However, the cost and appearance of devices need to pay attention last.

The first step is to determine the type of heating system. It can be centralized and autonomous. The first require radiators to withstand high pressure. It is best to use bimetal or steel batteries. They are able to withstand the maximum pressure. With independent heating, you can give preference to any radiators, since in this case the pressure will be minimal (no more than 5 atm), and the coolant will be free from destructive chemical impurities.

It is necessary to pay attention to the heat transfer heater. Leading positions in heat transfer are aluminum radiators, and steel is second. Another important factor is the size of the equipment. If sills are standard, it is recommended to give preference to batteries with a height of 500 mm (it is important to note that when installing the heater before the sill there should be at least 10 cm).The size is also chosen in accordance with the area of ​​the heated room and its type (residential, office, industrial). To heat the spacious objects will require overall batteries.

Dozens of models of radiators are among the most popular Rommer radiators.

The following batteries are in great demand among them:

1. Optima 500. Sectional aluminum heating equipment with a maximum working pressure of 16 bar. It has a wall construction. Designed for side connection. This model has anti-corrosion properties. The high quality of these batteries is due to a three-stage inspection system. Consumers note the easy installation of devices, their thermal efficiency and durability. Depending on the size of the premises, the buyer can choose from 1 to 14 sections.
2. Profi Bm 500. Bimetallic radiators with a capacity of sections 175 watts. They are designed for both centralized heating systems and autonomous. The term of operation declared by the manufacturer is not less than 5 years. Consumers value this line of radiators for high thermal power, aesthetic appearance and reliability.
3. Plus Al 500. High pressure casting radiators. The outer and inner walls of the equipment are covered with a specialized protective film that protects against the effects of aggressive components in the coolant. Products have a capacity of 160 watts. Radiators of this series are loved by the consumer due to the optimal ratio of price and quality.

Heating equipment Rommer - modern development, designed for operation in the Russian context. Due to the absence of edges and corners in batteries, they can be installed not only in residential and commercial buildings, but also in children's institutions: hospitals, kindergartens, schools. Due to the numerous positive feedbacks from consumers, Rommer products are gaining increasing popularity every year.

For information on what is manufactured and what operational capabilities Rommer radiators have, see the following video.