Choosing klyymery for lining

Klyimery for lining are convenient and durable type of fasteners. The simplicity of their design and ease of installation allow you to cladding the walls yourself and in a short time.

Kleimer is a bracket for the manufacture of which is used galvanized iron or spring steel. The design of this hardware provides for the possibility of reliable fixation of the lining slats. The fastener perfectly matches the shape of the rails with the tongue and groove system. Klyaymery also used for fixing the MDF-plates "Calm" and plastic panels.

On the surface of the bracket there are holes provided for fixing the hardware on the rough base or crate. Fastening is carried out with the help of nails, screws or screws and depends on the material of manufacture of the working surface. Each Klymer is equipped with deep hooks, with which the board is strengthened. Some models are additionally equipped with spike-hooks, which strengthen the fixation of the material and provide additional strength of fasteners.

Klyaymery are available in a wide range with a wide variety of varieties and sizes, which greatly facilitates the selection of the necessary hardware and systematizes the model range. The classification takes place according to the height of the tongue and the thickness of the Klymer. The minimum height is 1 mm; the maximum height is 6 mm. The most common are staples with tongue height of 5 mm.

This type of hardware is considered universal and suitable for many types of wall paneling. For eurolining installation, it is better to use a size of 4 mm, and for facing a block house - six millimeter models.

High customer demand and popularity of kleimer due to the many indisputable advantages of this type of fasteners.

• The simplicity of the design and simple installation process allow you to independently perform the facing of the room, without resorting to the services of specialists, and the exact observance of the installation technology will significantly reduce the time of work.
• The use of staples eliminates drilling, nailing and other mechanical effects on the lining slats, making the occurrence of cracks and chips becomes impossible. This is one of the advantages of using fixing klyaymerov before installation, carried out with the help of screws, nails and screws.
• A large size range of models allows you to create a neat seamless coating, even when using the technology of combining lining with other finishing materials.

• Reliable fixation, which is achieved with the help of clamps, completely eliminates the risk of deformation and shear of the coating.
• Klymery are highly resistant to aggressive environmental influences and high humidity, so that they can be used in conditions of negative temperatures, and in the finishing of baths and saunas.
• Comfortable cost.The price of Klymery compares favorably with the price of other types of hardware.
• The versatility of the design allows the use of staples when installing the wall paneling on any draft surfaces, including wooden, concrete, cinder blocks, cement foundations and lathing.

The disadvantages of Klyimer for lining include lack of reliability under the influence of increased loads or vibrations of the foundation.

Find the right hardware is very simple. The main condition for this is the selection of the required size, which is determined by the type and width of the wall paneling. Attention should also be paid to the integrity of the galvanized coating, since the corrosion resistance of the staples will depend on this. Self-tapping screws should be purchased at the rate of 2-3 pieces per one klyaymer. Fixing the hardware with one screw is unacceptable - immediate savings in the future will provoke deformation and shift of the wall panel.

In order to select the desired number of clears, it is necessary to make simple calculations: on average, you need to purchase 20 staples per square meter. m surface.It should be borne in mind that when finishing a flat area, the step between adjacent hardware should be equal to 45 cm, when facing the outer zones - 35 cm, and when installing the wall paneling in the corner sections, the step length is 25 cm.

Installation of klyaymerov carried out using a screwdriver, building level, tape, angle, hammer, screwdriver and marker. The first stage of the work should be the preparation of the working base by leveling the surface or, if necessary, installing the batten. The evenness of the base is determined using a laser or building level. All protruding parts must be removed, and large cracks, chips and deformations are eliminated using a cement-sand mixture.

After that, you should make an antiseptic treatment of the base and wait until the surface is completely dry. Then you can begin to mark the place of installation klyaymerov. It should be borne in mind that with the vertical arrangement of the rails, the installation of the hardware should be planned at a distance of the width of the board from the adjacent wall.When horizontal position should retreat from the floor 2-3 mm, necessary for screwing screws. Particular attention should be paid to the clarity of the location of the first element, since it will depend on the correct installation of all subsequent slats and the appearance of the lining as a whole.

Installation of klyaymer and lining rails occurs alternately, so the main thing is to strictly follow the order of installation and follow the parallel arrangement of elements. The use of nails as fixing elements for a bracket is permissible only in the case of installation on a wooden crate. In all other cases, use screws or dowels, depending on the size of the bracket and the weight of wooden slats. Then you should proceed to the installation of klyimer, while it is necessary to ensure that the board lay flat: without shifts to the side and disrupting the general procedure of installation.

In order to facilitate the screwing of the screws, you must first mark the right places with dots. After the installation of the first brackets, it is necessary to proceed with the installation of the wall panel, simultaneously fixing the following brackets. The first lamella is installed in the hook of the bracket, and then the subsequent strips are inserted into the groove with a groove.The next bracket should not be fixed until a completely flat installation of the first panel is determined. The end part of the lamella, equipped with a comb, should be pressed tightly to the base, and at this time, insert a Klymer into the groove and fix it with self-tapping screws.

Following this method of installation, you need to finish the installation of the material, periodically referring to the readings of the construction level. After installing the last board, you must close the metal fasteners with a wooden side.

Compliance with the following simple rules will extend the life of the wall paneling and will keep the original appearance for a long time:

• Kleimers should be acquired in specialized building stores, which will eliminate the risk of forgery and prevent corrosion and a quick failure of fastening brackets;
• In order to avoid the appearance of rust and the destruction of hardware, it is not recommended to use liquid sealants to form joints;
• after the completion of the installation work, the paneling should be coated with a varnish, oil or wax composition - such a coating will help protect the material from aggressive exposure to sunlight and excessive moisture;

• When installing the wall panel, do not allow direct contact of the lamellae with the surface of the base - this may adversely affect the ventilation of the walls and cause the formation of fungus and mold;
• Cutting holes for sockets and switches should be carried out using a flared saw immediately after facing, before applying varnish or wax;
• the space left near the floor is hidden with the help of decorative plinth, suitable in color and texture.

Using a clapboard for clapboard as fasteners, it is possible in a short time to independently produce a beautiful and spectacular finish of a house, apartment or bath.

You can find out the fastest way to mount a car from the video below.