Conord gas boilers: models and terms of use

The release of the well-known heating boilers under the Konord brand is produced by a domestic enterprise located in Rostov-on-Don. The newest and most advanced technologies, as well as a complete renovation of production capacities, allowed the Rostov plant to produce products that are not inferior to the most famous foreign counterparts. Quite large floor-type devices are distinguished by increased productivity and enviable reliability.

To make sure that this product has the best quality, you can read the various reviews about these products that users leave about them. Consumers pay attention to the fact that the device for heating from "Conord" have a long service life, a decent degree of reliability and excellent efficiency. For all products of the plant there is an increased warranty, for this reason, if something breaks in the first 3 years of use of the device, the manufacturer will carry out free maintenance or quality repairs. Full warranty period is 15 years.

Outwardly, these units are quite strict design. Models with two circuits can be used in hot water supply systems in the warm season of the year and will not be dependent on heating. Gas products from Conord are launched by piezo-ignition, and the technical characteristics reflect their excellent functionality.

All instruments from "Conord" are divided into:

• Models where there is no system for supplying heated water to the consumer. They have built-in Italian automation and they are extremely in demand.
• Heating devices that can give only warmth in the home. Their automatic elements use the principle of thermohydraulics.
• Boilers, which provide not only the heating of the home, but also warm the water for domestic needs. They built automatic from Italy from SIT.
• Models that are able to heat rooms and calmly warm the liquid for various tasks.Thermo-hydraulic automation makes these tasks easier.

The positive features of gas appliances from “Konord” can be determined according to reviews of those owners who actively use them:

• large model range;
• models have 3 types of automation;
• profitability;
• high efficiency;
• in case of a breakdown of the boiler, it is possible to quickly find spare parts;
• good thermal insulation;
• guarantee of perfect work for 3 years;

• smooth operation for nearly 15 years;
• steel heat exchangers help withstand heat distortion;
• the use of water from the mains as a coolant;
• the ability to connect to the system with different types of circulation of the working environment;
• almost complete lack of wall-mounted devices;
• non-volatility of devices;
• use in certain series of automation parts made in Italy and Poland;
• simplified process of using the device.

The boilers of this manufacturer are created in accordance with the peculiarities of the domestic climate and are designed to generate the necessary amount of heat to warm the home even in the most severe frosts.

The reliability of these popular devices is guaranteed by the increased level of durability of instruments for heating, and their independence from electricity will allow them to function without any kind of failures or delays, especially in conditions when there is no electricity.

The low level of noise exposure during operation, compact size and stylish design will allow you to place the device in the kitchen or in any other room without harm to the design of this room.

A gas unit with 2 circuits from "Conord" can heat the room as quickly as possible, as well as provide the owners of the dwelling with heated water for personal use.

The safe operation of the products is guaranteed by arranging various components of the protection of the automation box, which will help to turn off the product when the traction is lost. In addition, the boiler will be turned off in the event of any failure or any other type of failure. You can automatically adjust the heating temperature of the device, and if the pressure of the fuel is too low, the device will provide a quick forced air injection to supportfunctionality of the device.

Disadvantages of products "Conord":

• not the highest build quality of some models;
• steel thickness will not exceed 3 mm;
• ban on the use of antifreeze.

Floor-mounted devices "Conord" are available with different power - from 8 to 30 kW. They come with one circuit: these are the KSts-G-8 and KSts-G-10, KSts-G-12 and KSts-G-16, KSts-G-20 and KSts-G-25, and KSts-G- models. thirty; and with two circuits: KSC-GV-10 and KSC-GV-12, KSC-GV-16 and KSC-GV-20, KSC-GV-25 and KSC-GV-30.

Each letter in this case will have its own value:

• “K” is the name of the device - “Boiler”.
• "C" is the type of material from which the boiler is made. In a particular case, it is steel.
• "C" - firebox released in the form of a cylinder.
• "G" - without other letters next to it will mean that before you is a gas unit.
• The letters "GW" will show you that in a particular case in front of you is a product with the function of GWS.
• The numbers in this title indicate the level of the maximum power indicator of the device.When selecting these parameters, it is necessary to take 1 kW for heating a room of 10 m2 with a wall height of not more than 2.5 m.

Thus, the KSts-GV-12 device is a boiler made of steel with a furnace from a cylinder, having a function of hot water and a maximum power of 12 kW. Products with one circuit are selected only for heating a dwelling with an area of ​​30 to 300 m2. Dual-circuit devices from "Conord" can be used for heating and for obtaining heated water.

In the line of this popular brand there are almost no variants of models for the walls, for this reason for the heating system of the dwelling ordinary people buy floor-type boilers, which sometimes have a number of additional features. Outdoor products are available in 4 popular series. The plant produces all units from high quality steel. To improve the resistance of the boiler, a special powder layer is applied to its body, which will protect the device from the effects of sufficiently high temperature effects and serious loads.

In this series, you can easily find an excellent device with a single circuit, which will also be equipped with a rather convenient regulator for fuel supply. Import automation, which is necessary to control the entire operation of the product, ensures its complete safety. Devices from this series can be adapted for heating buildings that have an area of ​​80 m2 to 300 m2, but the correct choice of boiler should be made.

The operating pressure level of the aggregates from the KSts-G-S modification can be from 0.2 to 2 bar, the lowest temperature when the coolant is heated is 60 degrees, and the highest is 90 degrees.

Multifunctional products under the designation KSC-MR have a special heat exchanger in the form of a cylinder that is made of good steel. This solution helped them to obtain the highest possible performance and guarantee the possibility of high-quality heating of the coolant that circulates in the circuit. In this modification, models with one circuit are mainly presented, they can be easily selected for rapid heating of dwellings with a vast area (100-300 m2).

Products KSts-MR can be used in rather difficult conditions - they can work in those systems that have a pressure of up to 4-5 Bar.In order to optimize the entire heating process, the products are equipped with excellent thermo- and hydraulic automatics.

The device "Conord" with two circuits can be found in a series of KSC-GV-S. Models have an outline in order to provide a dwelling house. Products operate under the careful control of automation from Italy by SIT and are able to heat buildings that have an area from 120 to 300 m2.

By purchasing this device, the average person will be able to solve 2 problems at once and will complement his home with a device with which he can warm all the rooms and give the required amount of heated water for various needs. These products are considered to be quite versatile - they can be used in different systems.

Among all types of products, which are assembled under the designation KSC-GV-N, you can choose a good two-circuit unit “Conord”, whose main characteristics will be represented by a special type of smoke collector and the integration of thermo-hydraulic type of automation. Products KSts-GV-N are distinguished by a special system of protection against accidents. These units are considered the safest and, most importantly, guaranteed to be reliable. They are complemented by special detectors that will immediately stop the transfer of fuel at the slightest threat of an accident.This product is capable of itself making its work stable in the presence of not very large reverse thrust. Power devices in this series will be from 12 to 30 kW.

The copper "Konord" from a series AOGV is a popular non-volatile unit. Gas unit "Conord" AKGV-17.4 kW modification-3, has a DHW circuit. The boiler ACGV 17.4-3 has two circuits, supplemented by Italian automatics from SIT. The use of a special fuel supply regulator “EuroSIT” allows stabilizing the required temperature and product operation even at the lowest pressure level of the fuel. The parameters of temperature control - from 40 to 90 degrees.

Installation of a coaxial chimney in the boiler will practically solve any problems that may be related to the efficiency of the removal of combustion products from the dwelling. Usually the autonomous heating system is qualitatively improved. Pay attention to a number of aspects that may well help you make a choice in favor of a coaxial pipe:

• increasing the efficiency of the device due to the heating of incoming oxygen;
• there is a significant reduction in gas consumption, in the end, you can save on its purchase or on paying bills for rent;
• the installation of the chimney can be made in the wall, and not as usual - in the ceiling;
• Oxygen is burned outside the room.

In order not to lose the warranty on the maintenance of your unit, you do not need to independently carry out work on the installation of the boiler and its repair. Connecting the product, its correct setting, the implementation of the first start should be carried out by service specialists. They will make a separate record of the work performed in the passport of the unit purchased by you. It is necessary once a year to make prevention of the work of the entire boiler - a mark is also made about it in the technical certificate of the device. If there are no such entries, your warranty may be void.

The Conord burner may sometimes not light up. This can happen because:

• There is a lot of dirt on the burner. Before you turn on the design, you need to clean the nozzles with a soft brush or just a vacuum cleaner.
• There may not be enough oxygen to quickly start the burner.Again, it is necessary to clean the nozzles that supply air, ventilate the room thoroughly, and again try to light the burner.
• Perhaps the contacts in the thermostat just oxidized. Here is the sweep.
• The automatics sensors broke down.
• It is necessary to flush the igniter or clean it of any dust or dirt.

If your coolant cools down very quickly, you just need to switch the thermostat to maximum parameters or make more fuel flow to the burner, if only the instrument manual allows for this kind of action.

For the summer period, it will be necessary to switch off the circuit altogether for heating. It will only be necessary to close the valve at the inlet of the coolant. If the burner works alone, the water will warm up to 60 degrees in 1 hour. If the heated liquid does not immediately get out, it will retain heat for about another 2 hours.

The domestic plant "Konord" has already earned an excellent reputation in the domestic market of heating devices due to the release of high-quality equipment. Among users, Conord units, reviews of which have mostly positive features, are always in fairly high demand.

For information on how Conord gas boilers are produced, see the following video.