Boilers "Teplodar": features and benefits of products

The Teplodar plant manufactures Cooper boilers. Units have a high efficiency, as they differ in a special design. The company also produces modifications such as the Cooper Pro, options for pellet and gas fuel. In order to rebuild the boiler under a different type of fuel, it is only necessary to install a suitable device.

Execution options

Model boilers "OK 15", "OK 20" and others began to be popular since their appearance on the market. However, before considering these models in more detail, it is worth knowing what modern products for heating the company produces.

    • The equipment is made of iron and steel. Cast iron boilers are brittle due to the nature of the material, but serve much longer than steel models.This is due to the fact that steel products of this type are made using seam welding, and loading into the furnace in this case takes place much more often than into cast iron devices, since the fuel burns faster.
    • Gas generating devices and models of standard type. The first option is long-burning equipment (boilers with a gas generator). Products of this type are more economical, but because of the higher cost, buyers often choose not theirs, but the standard versions of boiler equipment.
    • Devices can be dependent and independent of power supply. Units that do not include PETN are mainly used in systems in which natural air supply takes place. Such equipment is considered independent of electricity. But the units with tenami need to be connected to the mains. They are used only when necessary.

    Range

    Teplodar products, namely the Cooper boilers, are manufactured in several versions. These include models such as "UWC 10", "OVK 18", "OK 15", "OK 20", "OK 30", "OK 42", "Cooper PRO 25", "PRO 36" and "PRO 42 ".

    It is important to know that OK stands for "heating boilers."

    HVAC products are heating boilers with the presence of a hob. As for the numbers in the model names, they indicate the power of the equipment. The combination of the letters "PRO" indicates a separate series of models, in which the loading chamber is increased (due to it the number of downloads is reduced). Fuel is loaded into the boiler with a missile defense designation once every 8 hours. All these nuances should be considered when choosing a unit for each individual case.

    Consider the power and scope of use of some boilers brand.

    • Model OVK 10. This option has a minimum capacity. Because of this, the unit is only suitable for heating houses with an area of ​​no more than 100 square meters.
    • Heating boiler 15. It has a power of 15 kilowatts. This is enough to heat a 120-square-square building.
    • Boiler HVAC 18 and furnace-boiler 20. These models have higher productivity. The combined type is able to warm up the room with an area of ​​180 squares, It can also be used for cooking.
    • The unit is OK 36. If the size of the building is more than 200 squares, then experts recommend using just such a model.

    When considering the range it is necessary to rely on the fact that the power of heating equipment at 1 kilowatt is enough to heat 10 squares of the room. It is advisable to choose a model for several kilowatts more powerful. So you will have a power reserve, and the unit will work without overload.

    If you need to heat a small building, then you can pay attention to the boiler called "Cooper Cosiness".

    This model is able to effectively heat a room of 100 squares. Although this unit works on wood, it can be additionally equipped with appropriate equipment and rebuilt for another type of fuel (for example, pellets or gas).

    Advantages and disadvantages

    Judging by the reviews, the Cooper units have not only a high level of efficiency, but also many other advantages.

    The main advantages include several points.

    • High efficiency and the ability to choose the power of heating equipment.
    • Most models are independent of the gas line and power supply.
    • The beautiful appearance of the units allows you to choose an option for any style of interior.
    • For the normal functioning of the boiler is quite suitable coal, which is not difficult to find.
    • You can use different types of solid fuels (not only lignite and hard coal, but also firewood). Although it is believed that they emit less heat energy and are irrelevant, if there is nothing to replace them, they will adequately cope with their task.
    • The advantage of such units can be called a low rate of contamination, and when the device is still dirty, it is quite easy to clean.
    • Modern manufacturing techniques, the function of high-quality and reliable equipment protection.

    Like any products, Cooper boilers have drawbacks.

    • Due to the fact that the boilers of the company appeared on the market recently, many people do not want to acquire such plants, preferring proven companies.
    • If the boiler is made of steel, then in terms of reliability it is significantly inferior to iron products and this brand, and other firms.
    • The set of units does not include the control unit Teng. Therefore, buyers have to spend extra on the purchase of such an installation.
    • Units of this brand have only one circuit.
    • Manual mode of loading fuel is also considered a disadvantage by some.

    Principle of operation

    Boiler equipment "Cooper" has a certain principle of operation, which everyone should know about who is going to purchase one or more units in its use.

    • In order for the unit to start functioning, it is necessary to open the door and put fuel in the furnace. Briquettes, firewood or coal can be used as fuel.
    • Then you should open the lower part of the body and start lighting the fire.
    • After burning begins, the unit will gradually produce heat, which, in turn, will warm up the water jacket with heat carrier.
    • When the coolant starts to heat up, the process of circulation through the heating system will start. This process can be both forced and natural.
    • Gases, which are formed during the combustion of fuel, enter the exhaust pipe and are displayed on the street. It should be noted that the chimney, suitable for boiler equipment "Teplodar", must be at least 12 cm in diameter.

    The heating efficiency of the coolant is caused by a multi-row system and pipes, which are staggered in the housing.

    Due to this, the liquid does not stagnate in the heat exchanger.If the owner wants to increase the efficiency, then you need to use basalt insulation.

    Fuel

    As already mentioned, heating boilers "Cooper" can work on different types of fuel. Many people think that if the equipment runs on coal and wood, then this is a solid-fuel device, and gas has nothing to do with electricity. But actually it is not. Boilers "Teplodar" are equipped with heating elements, which is a feature of the units.

    Brand boilers with heating elements of modest capacity cannot heat a room of more than 100 squares.However, such units perfectly cope with maintaining the required temperature in small rooms. For a large building, you can purchase a more powerful installation or several weaker options. In order to control the work of a group of tenes, it is necessary to purchase a control unit with air and water temperature sensors. Using the panel, you can either turn on all devices or leave several in working condition or even one unit.

    Also, the company's devices are able to work on pellets and gas.

    To reconfigure the unit, it is necessary to additionally equip it with a special burner. The installation of such a burner is carried out in a special hole, which is located on the furnace door. However, it should be borne in mind that gas consumption in this case will be higher than when the gas boiler is operating. If you buy a conventional solid fuel boiler, then lose the advantages enjoyed by the unique products "Cooper", because the usual equipment is not able to work on different types of fuel. It is worth considering when choosing.

    Reviews

    Often buyers are attracted not only by the quality of the products, but also by the affordable price. In this case, both of these factors are combined, which makes the company's units suitable for everyone. In reviews, equipment efficiency with its compact dimensions is often noted. Dimensions of devices allow you to install them in rooms with an area of ​​5 squares.

    The owners also say that the boilers are perfectly tuned to the required power and duration of combustion.

    If it is necessary to set the temperature of the coolant to 70 degrees and load the full combustion chamber with fuel, the unit will maintain this temperature level for 4 hours. Such indicators lead buyers using firewood.But if coal is taken as a fuel, the duration of burning increases. It is worth noting the fact that after the end of the service life of the Teplodar boilers, most consumers again purchase equipment of the same brand.

    Video review of one of the models of boilers "Teplodar" see in the video below.

    Comments
     Author
    Information provided for reference purposes. For construction issues, always consult a specialist.

    Entrance hall

    Living room

    Bedroom