Lining "Calm" larch: the pros and cons

Lining - demanded coverage, popular due to the fact that its basis is natural wood. It is used for interior and exterior wall cladding, used in the construction of baths, gazebos, balconies and verandas. Material "Calm", created from larch, has special properties: the wood of this breed is not affected by temperature drops and humidity, such products have many obvious advantages, although they are not without drawbacks.

Lining "Calm" can be made of wood such as alder, oak, linden, as well as from conifers - pine, spruce and cedar.The difference in larch lumber is its flawless geometry, smooth, smooth surface without relief and beautiful patterns formed by stripes and growth rings.

Products are boards treated with the latest technology from all sides. This causes a more expensive cost, which is fully justified due to the undoubted quality and numerous advantages.

• The material has a dense, solid structure, has high strength.
• Products calmly tolerate any atmospheric conditions and temperature drops.
• Larch lining is resistant to chemical compounds and ultraviolet.
• When assembling the joints between the boards are invisible, so the result is a monolithic canvas.
• The covering can be combined with other facing products.
• The material has a low flammability;
• Lining has a high temperature resistance - it does not allow the resin, even at very high temperatures, so it is successfully used for covering saunas and baths.

Such wood has beautiful golden-brown, deep yellow, reddish tones, differs in variety of shades, a specific natural pattern.

The materials from the larch "Calm" are made with longitudinal grooves on the inside - this allows natural ventilation as well as moisture evaporating. The simplicity of the coating assembly is also different, and due to the lack of bevels along the edges of the wooden panels and the presence of deep joining locks, the surface looks organic and complete. In addition, eurolining is characterized by a long service life.

Wooden profiles of larch are produced with a standard thickness of 13-14 mm, although for individual orders it is possible to manufacture boards with sizes up to 20 mm. Width of products can vary from 85 to 140 mm.

Larch lining differs from ordinary lining by the high quality of the wood used, it has a deeper tongue-and-groove joint and internal samples. For this reason, the lifetime, and without that considerable, increases significantly (up to 100 years).

Panels "Calm" differ in their grade: This material is "Prima", "Extra", "AV". The variety depends on the number of such defects present on the panels, such as cracks, roughness, unevenness, knots, sernitsa with resin. Based on the percentage, is determined by the class of the product, and hence its cost. Consider in more detail each of the varieties.

• Material class "Extra" - flawless premium products, free from defects. Accordingly, it has the highest cost.
• Class "A" - with the general high quality, knots are allowed (one and a half meters of the board), however it is difficult to call it a product defect, since such inclusions even decorate panels.
• Category "B" suggests the presence of four knots and one spot that is different in color - this board looks beautiful, but not for a classic interior.
• Class "C", in fact, is a marriage, as it has many shortcomings, therefore, it is not in demand and is considered as an option only for such premises as a basement or hozblok.

Products of this class of larch are not inferior in their technical and operational characteristics even to oak, but their cost is much more affordable.Partly for this reason, many choose it for decoration of their country houses, and sometimes apartments. In such rooms it is easy to breathe, it is warm, they look aesthetically pleasing, the coating tolerates moisture and does not rot.

In addition to the original and original appearance, lumber has other useful properties.

• It is not susceptible to the reproduction of fungi, mold and other microorganisms.
• Larch is a pure natural material, safe in its composition.
• Products are resistant to cracking and deformation at large ranges of critical temperatures.
• The strength of this material is close to that of the hardest woods.
• Creates a healthy microenvironment in the room due to the content of plant volatile and antioxidants.
• It has sound-proof qualities and durability.
• The material is moisture resistant, so it can be used for finishing rooms with high humidity.

For different purposes, a certain thickness of the boards and the method of their processing are selected. Some varieties of larch can be painted, applied on them oil-wax, to give any texture.

Due to the great popularity of "retro", "country" and vintage style in the home interior, decorating the noble antiquity of facing materials is becoming more and more popular. High-quality brushed Euro lining, which occupies ever higher positions in the construction market, enjoys special love.

Brushing, that is, artificial aging of wood material can make it unique. The technology provides for the drying of panels, the removal of soft layers of wood with the help of special equipment, due to which beautiful scuffs appear, giving the boards an elegant and aristocratic look. Then the boards are coated with special mastic with wax content, in this way the texture of the material is emphasized.

Since hardwoods often fade, brushing is appropriate for coniferous varieties of wood, and larch is an ideal material for this, which does not fade, and is not afraid of mechanical damage.

In general, the “Calm” wall paneling is durable, reliable and beautiful products.It is resistant to steam and moisture, is fire resistant, and is not susceptible to sunlight and heat. This is natural, natural wood, which is easy to lay and repair, in addition, it is non-toxic and heat resistant.

You can find out how to make your own hands lining up from the video below.