Types of drainage systems "Metal Profile"

Precipitation and other environmental factors do not have the best effect on architectural structures. It affects not only the roof, but also the facade of the building, its foundation. In order to protect the structure from excessive waterlogging and erosion of its individual elements, drain systems are used.

Today, Metal Profile products are in great demand. Varieties of drainage systems brand allow you to choose the best option for each case.

The drainage system “Metal Profile” has all the elements necessary for a reliable covering of the building from moisture:

• gutters for collecting and receiving water from the roof;
• funnels;
• water pipes;
• drain tribe;
• corners;
• caps;
• nets for catching garbage;
• fixings for fixing pipes and gutters.

Thanks to the design of the above-mentioned products, thought out to the smallest detail, optimal conditions for the operation of the building are provided, the probability of over-wetting the facade and blurring of the foundation is excluded. In addition to the protection function, the “Metal Profile” drain also acts as a decorative element.

All elements of the system are thoroughly tested for compliance with standards, and modern technological equipment and production methods allow you to perform a full cycle of creating parts at the highest level. Drainage systems "Metal Profile" can be installed on low and high buildings, residential and industrial buildings. They can withstand huge loads: a large amount of snow, ice, precipitation, etc.

Metal Profile metal gutter systems are reliable, durable, aesthetically attractive, affordable, easy to install and maintain. Such characteristics were realized through the use of high-quality materials in the manufacture of products and quality control throughout all production cycles.

On the building materials market, systems from the Metal Profile brand are represented in the following range of series:

1. MP Prestige;
2. "MP Modern";
3. MP Grand System;
4. "MP Project".

Drain "Prestige" has a circular cross-section, diameter 125/100 mm. Available in white, brown, green, cherry and gray. The main production material is galvanized steel, treated on both sides with plastisol. Today it is the best coating that provides high resistance of metal products to corrosion processes and mechanical deformations.

The design is easy to install, does not require the use of sealant and fixing rivets.

Water drainage system "Modern" (rectangular section). Available in four colors: white, brown, dark green and cherry. The main raw material is galvanized steel coated with modern polymer plastisol. This is the thickest coating of all existing in the development of the company "Metal Profile".

The internal parts of all elements of the drain are treated with a protective varnish. A distinctive feature of this system is a deep drain for receiving water. In round gutters, it is much smaller. Thanks to this design feature, the likelihood of overflow is significantly reduced.

All details of the drain "Modern" meet European quality standards. The gutter brackets, which are the most vulnerable link in the construction of many drainage systems of other manufacturers, in this series are made of four-millimeter galvanized steel, and are powder coated on top. Due to such a feature, the products calmly withstand the loads of large volumes of snow, ice, and also do not become unusable after an avalanche-like descent of snow from the roof. The vodka system "Modern" is suitable for architectural structures of all types.

Drainage system Grand System. The material used is galvanized steel of the highest quality. Products consist of several layers. Dimensions and weight of the structure allow you to quickly and easily transport it to the installation site. Installation does not cause trouble.

In the care of the Grand System is simple and reliable. Details of a complete set can always be found in places of implementation of drainage systems. It is a reliable and durable system. Not afraid of sudden changes in temperature, sealed. Easy to repair, has a long warranty period.

Drainage system "Project" (circular section with a diameter of 185/150 mm). Available in three colors: white, brown and cherry. It is made of galvanized steel with polyester coating from leading domestic and foreign manufacturers.

It can be installed on the roof of any material. The drainage system “Project” is resistant to mechanical loads, prolonged exposure to ultraviolet radiation, corrosion and fading. Recommended for installation on multi-storey residential buildings and industrial type buildings.

Drainage systems “MP Prestige” and “Modern” are most often chosen by buyers, since they are universal in terms of use, installed on any buildings.

Proper installation of the drain at 90% ensures its durability and excellent performance.The system must be installed by an expert who has experience and knows all the subtleties of work. With self-installation, it is necessary to follow all the rules specified by the instructions.

Installation of a rectangular section is practically no different from the installation of a round drain. The difference lies only in the fact that a rectangular weir requires the use of rivets and sealant at the joints of the construction details. This nuance can be attributed to the category of minor defects of the system, since it will be slightly inferior in strength to a system with a round cross section.

Installation of gutters of circular cross section occurs without the use of adhesive and rivets. Each master knows that special attention during the sealing of the structure should be given to two zones - the node for the installation of the plug and the place where the gutter elements meet. Here it is necessary to use seals with which the systems are completed. They are produced from special rubber, which is able to withstand a large number of freezing and thawing cycles.

The gasket, which comes with the chute connector, has “grooves” to compensate for thermal expansion.In other places of the drain, tightness is ensured by careful fitting of parts and the highest possible density of joints.

For more information about the installation of drainage systems, see the following video.

Unforeseen complications during operation and at the time of installation of Metal Profile drains can be avoided if you install these products before laying roofing. As a rule, the gutters are fixed on rafters, frontal roof boards or crate. But in the case when the roof covering has already been laid, the rafters are closed, and there is no frontal board in the construction, a dilemma arises with the installation of the drainage system. Of course, any drain can be fixed on the finished roof, but then the process of fixing the gutter is much more complicated. therefore Experts advise to think in advance at what stage the drainage system will be installed.

Masters also recommend to buy metal-drainage systems, giving preference to them, rather than PVC systems. Metal structures are more reliable than PVC, at any time, as evidenced by user reviews, they can be repainted (if you plan to repair or update the facade). The only drawback is the noise from the flowing water.On metal systems, it is more expressive than on plastic systems.