Yutafol D 96 Silver: properties and applications

The waterproofing diffusion membrane Yutafol D 96 Silver (not to be confused with Yutafol N 96) is a successful product of Utah, which has existed on the market for over 15 years. This material provides reliable protection of the space from excessive moisture, dust, dirt and other adverse effects. The membrane is made of polyethylene filaments, which are covered with a protective film on top. Transmission capacity for hydro- and vapor barrier due to the presence of small holes. Due to this, steam ventilation is possible.

This material is of high quality and durability. Its main distinguishing feature is the possibility of using only in well-ventilated structures. Due to the fact that the film has a perforated structure, it is able to provide indoor ventilation. If such a material is properly installed and operated, it will be possible to achieve with its help a long-term and first-class protection of the thermal insulation layer from the penetration of excess moisture. At the same time the design after installation of the membrane becomes completely airtight. So, it will be reliably protected from wind and heat loss.

The membrane "Yutafol D 96 Silver" fully complies with Russian and foreign quality standards. Its effectiveness is tested, and the quality of materials undergoes strict control. This is confirmed by the relevant certificates attached to the product.

The membrane "Yutafol D 96 Silver" is sold in rolls. Physical and mechanical characteristics of the material are as follows:

• weight is 7.7 kg;
• density is 96 kg per 1 square. m;
• the width of the membrane is 1500 mm, length - 50,000 mm, thickness - 0.17 mm;
• diffusion thickness is 4 mm;
• the outer surface of the film has a silver color;
• flammability class - OT;
• water resistance - W2.

This material is able to withstand a tensile force when piercing at 170 / 160N / 20 cm. At the same time, general indicators of tensile strength are 250N / 5 cm in the longitudinal direction and 240N / 5 cm in the transverse direction. The vapor permeability of the membrane is more than 35 g per 1 m2 per day. All these indicators are stored with intense ultraviolet radiation for 3 months.

This material is designed to be used as a barrier. It prevents the penetration of steam in roofing, floor and wall structures. Waterproofing film "Yutafol D 96 Silver" is suitable for creating a protective layer:

• spaces under the roof of two- or three-fold structures;
• unheated roofs;
• inclined and flat designs.

We list a few nuances that are worth knowing when using waterproofing of this type.

• It is better to use the membrane "Yutafol D 96 Silver" for isolation from inside the premises.
• If the climate in the region is rather humid, it is better to use another type of membrane to isolate (for example, “Silver AL”).
• When work is done in the northern regions, in which it is necessary to apply complex two-layer insulation, it is important to know: the inner layer of insulation should be about 5 times thinner than the outer one.
• The membrane has the same protective coating on both sides, so it can be laid on either side. Unless we are talking about a membrane with foil (here it is necessary to lay the film with foil inside the building).

The quality of waterproofing with Yutafol D 96 Silver film directly depends on how well it is installed. If you have no experience in carrying out such work, it is better to entrust it to professionals. Specialists will carry out high-quality installation in a short time.

When buying a material, be sure to ask the seller for a certificate that confirms the quality of products. Beware of fakes, because there are so many in today's market. You need to buy material in a trusted store. You can preview the information on the manufacturer’s website and find out which suppliers it works with.

After mounting the membrane in the roof structures between it and the insulation must be left space. To fix the joints, you must use a tape from the same manufacturer as the membrane itself. Then it will be possible to achieve the highest possible quality of work, because the manufacturer has created a tape specifically for Yutafol D 96 Silver. Never use adhesive-based sealants.

Depending on what size and slope of the roof, the horizontal overlap will vary from 10 to 20 cm, and vertical - up to 10 cm. A gap of about 5 cm should be left near the ridge of the roof.This is required for air blowing. The edge of the membrane should be lowered right up to the border. If you need to fix the film near the chimney, cut it and attach it to the nearest crate.

If you have an extra membrane, you only need to store it in clean rooms. In no case should the membrane be exposed to ultraviolet radiation. When you need to transport the film to another place, carefully pack it to prevent mechanical damage. They can subsequently lead to a deterioration in the quality of the material.

Most consumers speak positively about the quality of the membrane "Yutafol D 96 Silver". It provides reliable waterproofing. She is not afraid of snow, as well as rain, hail and dirt. In addition, such material is easy to find on sale, its cost is quite affordable.

Buyers also note the ease of film mounting. It does not require special skills, you can not even call the experts to do the installation by hand. The loyalty of customers is also caused by the fact that the material of the Czech brand is fireproof. So, do not worry that the sparks from the chimney, which fall on the roof,provoke a fire.

For how to mount all kinds of JUTA film, see the video below.