Features of pumping stations "Dzhileks"

In suburban areas, domestic pumping stations are used to provide premises or courtyards with water from various sources. They can be both artificial and natural (river, pond). Water fills special storage tanks, and then consumes. For example, it can be used for watering flower beds or garden trees, or sent directly to faucets, toilets, water heaters, etc.

The brand "Dzhileks" presented on the market for over 20 years. During this time, the manufacturer has won an excellent reputation, and its products have become a symbol of reliability and durability.Pumping stations are designed to transfer wastewater from residential, commercial, municipal and industrial buildings, as well as to deliver drinking water from wells to homes. As a rule, they are used in two main types of sewer systems: hermetic and gravity.

One of the features of the pump stations “Dzhileks” is the ease of installation, which can be carried out independently. Another feature of the stations is the ability to adjust the pressure. There are units with automated control, they are equipped with a pressure gauge and a pressure switch.

At the heart of the design of pumping stations is an electric motor. The function of emergency blocking takes thermoprotector. As soon as the winding overheats, the engine automatically turns off.

Body material may differ, and with it the characteristics of the model.

• Stainless steel looks beautiful. Water keeps the properties of the metal intact, but such products have a high level of noise. In addition, the cost of such devices is higher.
• Iron has less noise. Its only drawback is the appearance of rust over time.Therefore, when choosing a model, you should pay attention to the presence of a protective layer on the case.
• Plastic practically hides the noise of the engine running, there is no rust on it. All items manufactured from plastic are highly reliable and durable. Contact with water is completely excluded, since the internal parts have special protection. Graphiteceramic seals protect against leakage.

The equipment has both advantages and disadvantages. Among the main advantages of pumping stations "Dzhileks" there are several points:

• no idle;
• when turned on there is no hydraulic shock;
• small starting current;
• There is protection against the drop in electricity.

Among the disadvantages are the following nuances:

• complex installation;
• the need for repair to disassemble the unit completely;
• devices are loud;
• When the ambient temperature drops below + 10 degrees, malfunction may occur.

Stations "Dzhileks" can be classified according to various criteria, including performance. The parameters of the work, depending on the model, may vary significantly.It is worth taking into account at the time of purchase.

In the marking of the unit, the capital letters NA mean “pump station”. The first digit (60, 70, 50) is productivity, that is, how many liters per minute a pump can pump. The second digit is the distance that the water moves or the height that the station can raise it. The next big letter describes the body material (cast iron, plastic, etc.). The next figure is the capacity of the hydroaccumulator.

Most of the stations from the manufacturer are particularly popular with summer residents.

• For example, the model 60 / 35P-24 consumes 600 watts, so it is quite economical. It will be enough to provide water for a small family of two adults and two children. However, for watering the garden such power is not enough. The average cost of such a device is about 6 thousand rubles.
• More powerful installation can be called "Dzhileks" 70 / 50H. She is able to meet the needs of the owners of the house when working in the yard. The case of the model can be made not only of stainless steel, but also of fiberglass. The second option has less strength. Power model - 1100 W, the tank is designed for 50 liters.

Automatic station Jumbo 60/35 used in homes with constant pressure. The source can be immersed to nine meters, but the water temperature can not be less than +1 degrees or more + 50. Despite its advantages, such a unit does not give much pressure. It can provide a model 70/50.

A good option for supplying drinking water to the house - "Dzhileks" 50/28 H14 with a capacity of 500 W and a tank capacity of 14 liters. The depth of the dive can be 9 meters. In an hour the station pumps up to 3 m3 of water. Among the automatic models, it is one of the most simple and economical.

The package may be primary or secondary. Each model contains:

• hydropneumatic tank;
• surface type pump with electric motor;
• pressure switch;
• hose connecting pump and reservoir;
• electrical cable;
• water filter;
• pressure gauge;
• check valve.

Unlike many other manufacturers, "Dzhileks" can pump and muddy water. The self-priming pump has an integrated injector. There is a filter installed on the tip. The engine demonstrates automatic switching and control, has a reinforced design and can independently regulate pressure and fluid level. All parts have excellent hermetic protection.

The pipeline is lowered into the water at 300 mm, there is a check valve on the nozzle. As soon as the pressure becomes insufficient, the pump immediately shuts off. This parameter is factory set. Spare parts for all models are easy to find in specialized stores.

In relation to the tank, it can be said that it is membrane, two-chamber. The back pressure in the structure is created by means of air. Depending on the power of the pump can supply water to several points at once.

During the installation process, it is worth observing a few simple requirements for the unit to function normally. A check valve is sure to be installed because it prevents water from leaving the station in the off state. This creates a constant pressure, the water jet always flows in the same way. At the location of the pump in the well or open water reservoir valve should be located at the end of the pipe. If the water source is a well, then the placement method described is only available if there is a casing.

Condensation should not accumulate on the case, it may cause corrosion of unprotected elements. It is worth checking the tightness of joints and connections. The formation of cracks leads to air suction, respectively, the station loses the ability to supply water. Grounding is installed at the outlet, as an accident can cause electric shock.

Often you have to face the problem when the unit is working normally, but water does not flow. There may be several reasons, including a breach of sealing. If there is a mud blockage inside the well, the water goes down too low, so when connected, the pipe does not reach the surface of the liquid.

Often the membrane breaks, the flange fails, or the pump simply does not turn off when pressure drops. You can check the membrane damage yourself. To do this, you must remove the plastic cover from the back of the tank. Inside is nipple. If when you press it water flows, then there is a breakthrough. Replacing the part is easy.

Pump stations "Dzhileks" like users to self-troubleshooting. Experts do not advise making repairs yourself. On the other hand, many not very serious problems can be eliminated on our own, for example, adjusting the relay.

If the pressure has dropped, but it is impossible to determine this by eye, it is worth using a pressure gauge mounted on the tank of the pumping station. All indicators are removed when water is completely released. At 1.5 atm, everything is normal, but if the figure is lower, then use a simple pump from the machine to pump air. After that, it is important to find a leak.

Even good equipment requires repair over time, since wear can be avoided only by not using a station at all. If there are extraneous sounds, such as hum or squelch, you should pay attention to the engine or impeller.

A station assembled for a dacha or a private house will not work properly if the installation requirements are violated. This is evidenced by numerous reviews. Recommendations for connecting highlights in the instructions and the manufacturer.

Be sure to remember that:

• the fluid intake hose must not overlap with a sand pad, it must hang above it;
• you must have a grid that protects the tip with the injector from the sand;
• if you need to change the settings, it is better not to do it yourself;
• the delivery pipe is connected to the receiver.

When the pump starts to turn on and off frequently, jerking is the first sign that the membrane is torn or the pressure switch has failed. Sometimes the station simply does not turn off for the same reason.

The expansion tank performs several important functions, including helping to regulate the pressure in the water. When one or several drain points are turned on, the amount of fluid in the system decreases, the pressure drops, and when it reaches the bottom mark, the pump automatically turns on. The water will be collected until the level reaches 3 bar.

The volume of the pumping station for a private house depends on the amount of water consumed. The greater the flow, the greater the volume of the tank must be selected. The most popular models are 50 liters.

Overview of pumping stations "Dzhileks" see below.