Model range of pumps company "Aquarius"

The basis of any system that provides high-quality water supply in a country house, is considered a pump. It is necessary for the delivery of water from the well, for this reason, his choice should be given special attention. Pumps "Aquarius" - the most reliable assistants in the country. This famous brand is firmly entrenched in the positions of a leader in the domestic market. First, it became possible thanks to an affordable price, and secondly, thanks to the excellent quality of the goods.

Manufacturer Promelektro-Kharkiv appeared on the market in 1995, offering its customers simple, reliable and affordable household electric pumps.

Today, the company produces about 50 types of household pumps, both submersible and surface,which are used both autonomously - to irrigate household plots, and as part of automatic systems of modern water supply.

The performance of such devices will allow you to quickly fill with water a pool of any size, water gardens and vegetable gardens, and also supply fluid to the uppermost floors of a residential building. All products are manufactured from environmentally friendly materials.

Among the positive features of the Aquarius device line are:

• energy savings;
• high performance;
• low noise effect during operation;
• high wear resistance of parts that are made of stainless steel with elements of brass and safe plastic, which will allow to use this equipment for the extraction of clean drinking water;

• the ability to carry out warranty or self-repair;
• small weight parameters and dimensions that will correspond to the diameter of the existing well;
• complete set that will allow to start installation of the device immediately;
• resistance to voltage drops;
• the pump will not need to be removed for the winter.

The brand "Aquarius" offers a fairly large range of devices for supplying water - these are products that will work smoothly with dirty water containing sand, and electrical products with a centrifugal type system.

All kinds of devices of this kind will differ in manufacturer's parameters:

• power consumption;
• height of water pressure;
• borehole diameter;
• the number of valves;
• maximum water supply.

By location distinguish submersible (deep) and surface pumps. By type - downhole, drainage, well and pumping stations. To destination - for water supply, for increase of pressure of water, garden type.

Borehole pumps are submersible and surface type. The submersible device is characterized in that it is installed directly in the well itself. In the same place the submersible device is located all the time while it is being exploited. If you need a repair, or you need to upgrade the pump, you will have to get it out of the well.

Surface models are much more convenient in terms of use. Their repair and maintenance are made quite easily, as they are always available for inspection.However, with a lot of positive characteristics, they have a number of disadvantages in technical terms. The convenience of well pumps is that they can be installed and operated in real time with your own hands.

The downhole devices include such models as:

• device "Aquarius" 1 "BTsPE";
• products "Aquarius" 3;
• devices "Aquarius" 16.

The borehole pump is the best option for a country house and a summer residence. But it is also suitable for industrial water supply and even for extinguishing fires. During the work is completely silent.

Characteristics of models:

• Device "Aquarius" BTsPE 0.32 It has a working capacity of 0.32 m3 per second, in 1 hour it is as much as 3.6 m3 of water. Water pressure is constant at a height of 40 m.
• Product "Aquarius" BTsE 032-32U will weigh only 10.5 kg, while incorporating a single-phase electric motor. In addition to supplying high-quality drinking water, it can easily cope with watering the suburban area. The height of the liquid head will reach 32 meters, and the working capacity per hour - 1.2 m3.
• Device "Aquarius" BTsPE 0.5 most often used in wells with a diameter of 12 cm. It has a fairly powerful engine that will provide water pressure to a given height.

• The most popular model is considered to be a product. "Aquarius" BTsPE U 05-32. It is selected for a well that has a diameter of less than 11 cm. A constant water pressure is up to 48 m. The operability is 3.6 liters per hour.
• Water pump "Aquarius" BTsPE 0.32-63. It has a fairly powerful engine that will provide water pressure up to 63 meters.
• Pump "Aquarius" 3 - the easiest to use. It has a system of automatic shutdown of the device in any possible emergency. Can only be used with clean water. It has a weight of 4 kg, a plastic housing and a rubber piston. It is processed by a compound - and it means that the equipment becomes completely waterproof. Suitable for not very deep wells or shallow reservoirs. To control the device manufacturer offers a remote.

Surface pumps are those that are used at a depth of only 10 m. Basically, such pumps are needed for watering a vegetable garden and front garden.

Convenient if there is a small pond nearby. This pump should not be immersed in water, because its internal systems are afraid of moisture, and if liquid gets inside the device, it will immediately fail.

Two main models that can often be found outside the city:

• Model "Aquarius" BTsPE 1.2 has a capacity of 1.2 m3 in 1 sec. The head of the water column is 80 m. It has several subspecies, the product weight will also depend on their choice: from 7 to 24 kg.
• Device "Aquarius" BTsPE 1.6 with a performance indicator of 1.6 m3 in 1 sec. Water pressure is stable at an altitude of 40 m. The weight of the device will also depend on the specific species.

Drainage - such devices are used for pumping water from a newly dug well or for draining basements.

Filters are built into the drainage to prevent solid particles from entering the devices. Such pumps are used upright.

Most of the dacha owners and villagers choose vibrating-type devices to draw water from wells, boreholes, tanks, surface water bodies. Before devices with a different principle of operation, they have two significant advantages - a low price and low electricity consumption.

The two-valve pump "Aquarius" BV-0,14-63-U5 with vibration has such technical characteristics as:

• submersible type device with a two-valve fluid intake system;
• the height of the water column reaches 63 m;
• used for operation in wells and wells at a depth of not more than 5 m;
• operated in a vertical state;
• borehole diameter should be from 9 cm.

Model "Poseidon" pump "Aquarius":

• the equipment itself weighs 3.8 kg and is quite compact in size;
• no need to initially fill with water;
• released from quality materials;
• unpretentious in the work.

The Aquarius Poseidon vibration device (BV-0.16-63-U5) with a water intake system of four valves is suitable for wells and various types of wells, if their diameter starts at 12 cm and the depth reaches 100 meters.

Specifications:

• This model is considered the best for the supply of water for drinking and for watering the garden;
• refers to centrifugal downhole products, the use of which will not lead to erosion of the well;
• equipped with a cooling system with water itself;
• the size is small, which is extremely important for a surface type pump;
• does not depend on air temperature;
• The pump has an automatic shutdown system in case of an accident.

The submersible device looks like an oblong-looking capsule with a small diameter - only 10-16 cm. Other models from the Aquarius 0.32 line may be smaller in diameter.

The submersible pump will operate by rotating or pumping water inside the housing. After the water flows up through the pipe and into the system. Produce a product from stainless steel, thermoplastic and other alloys.

Submersible models are divided into a number of subspecies. By the principle of operation they are divided into centrifugal and vortex models, screw and vibrating products. The first 3 species are very similar to each other. They differ only in the way of raising the liquid:

• Centrifugal devices "Aquarius" apply centrifugal forces of rotation at once of a number of small rotors. The rotors inject water, then run it into the pipes in the form of a spiral and actively inject it into the hose. This is the most popular type of this product.
• Swirl Submersible forms the usual turbulence in the chamber, which helps to raise the fluid to a certain level. By force of pressure, they are often equal or slightly inferior to centrifugal devices, but in terms of pressure they are far ahead.
• Screw devices use powerful, but primitive type of screws that inject the liquid and serves it up.

The vibration device is already a model of a completely different type. Even a vibratory product looks different than other designs. Its body is larger and not elongated. It works due to the rotation inside the device engine of a special tool - this causes multi-frequency vibration. The effect of vibration in the chamber will be transmitted to the water and stimulates its flow. So it is possible to raise the water to all the necessary levels, without using screws, impellers, screws or something similar.

The vibration product is inferior to the first three varieties in terms of efficiency of use, but it is much cheaper, unpretentious in work and will not break upon contact with dirty liquid.

By immersion type devices are divided into:

• standard;
• deep.

Conventional models are immersed to a level of up to 50 m. Well, the depth versions of Aquarius can operate at elevations from 60-80 m depth or slightly below.

Surface models do not have many subspecies and are used only for servicing small wells. The problem is that with a pressure of 25-30 m they can pump fluid from a depth of up to 10 m. But not every well can have such a high level. Customer reviews suggest that the surface type pump is as reliable and convenient in operation as possible, but its technical characteristics and serious operating noise are negative qualities.

The submersible device is installed directly into the well. There it is located in a suspended form.

Centrifugal, as well as vortex and screw products can be installed as close as possible to the walls of the well.

It is better to mount the vibrating product only in wells that have good casing or a large distance from the pump itself. Otherwise, the vibration will raise sludge, sand and dirt from the bottom or will remove them from the walls of the well. This will not only make the quality of the fluid at the outlet worse, but will also render the well condition inoperable.

Installation steps:

• assemble the pump, connect all the contacts, make sure in good condition;
• bring the power and control cable to the device;
• connect the hose, cable insurance and float;
• lower the pump gently into the well;
• mounting it on a special mark and checking for performance;
• test the system.

Surface models are mounted on the ground. For these purposes, select any back room or any dry and moderately warm room. Under difficult operating conditions, such a model quickly breaks down. Only a hose with a check valve is lowered inside the well.

Installation steps:

• preparing a place for installation;
• the product is mounted and fastened to the floor or wall;
• cable is connected and output directly to the well;
• electricity is supplied;
• automatic operation is configured;
• before starting the whole system is tested.

If you have correctly installed the equipment used and serviced it in a timely manner, then the repair will be needed infrequently, if there is a need for it. In submersible models, it is often work items that break down, and sometimes consumables.The first will need repair, and it can be done only in the workshop. Many faults can be repaired with your own hands, but this can directly depend on the diameter of the pump.

So, you can gently align the impeller, if you have the right tool at hand. All kinds of seals, seal rings and other parts are easier to replace. This is especially true of parts such as bearings. If the pump suddenly begins to rattle or vibrate strongly, then the problem lies in them, and then the parts need to be replaced as soon as possible. If the device does not turn on or cannot respond to your commands, then there are problems with the cables or the engine.

It is quite possible that the supply cable was frayed, and the contacts inside the capsule could also be seriously damp. But with the engine can also be significant problems. In this case, it is better to give the device to an experienced master, who without problems will be able to disassemble the pump and replace the damaged parts. Surface products have similar damage, they also often "burn" the engine due to the rotation on the dry.

Using the product "Aquarius" will allow you to organize a system of high-quality water supply that can easily meet the water needs of your family. The only important condition is the correct selection of the model so that all its parameters fit the characteristics of the well. Device "Aquarius" will serve as long as possible, and the continuity of their work is well known to many consumers. Compliance with the rules of operation and careful inspection from time to time - a guarantee that the device will work for decades.

If you do not know how deep your well is, then it can easily be measured. To do this, pick up the rope with a load, gradually lower it to the source to the bottom. The length of the wet part of the rope will fully correspond to the depth of the existing well, and the dry will show the distance to the level of the aquifer. Once every 2 years, the submersible pump must be taken out of the mine and carefully inspected.

As for consumer reviews, they are mostly positive. Buyers note the affordable cost of the unit, the lack of frequent breakdowns during operation, the ability to repair their own hands, if the fault is minor. When comparing with pumps from other manufacturers, consumers have noted that the "Aquarius" pumps do a much better job with their main task. Based on these data, we can conclude that the devices of this manufacturer are considered to be the ideal choice for country buildings.

Next, see the review of the pump "Aquarius".