Original ideas of interior design of the house from a bar

Wood is a material that is very popular for the construction of private houses. Although along with it, stone and brick are popular, many prefer it to a bar that creates a unique look of the home. But after the construction of the building it is important to take care of the interior of the house. For it to be successful, it is important to take into account all the features of a material such as a bar, and choose the most suitable type of finish. All possible options and nuances of the interior design of the house will be discussed further.

A house of timber has a number of characteristics that are not typical of houses made of other materials.Among them are both positive and negative qualities. The advantages of wood include:

• The material is environmentally friendly.
• The house, built of timber, has a very presentable appearance.
• The construction of the building of wood elements takes less time than working with other materials.
• There is no need to spend a lot of time on laying an expensive foundation, because the timber will not create large loads.
• In comparison with other materials, wood has a lower price.

The following points are considered as nuances of difficulties:

• Over time, shrinkage of wooden structures usually occurs. In its primary stage, it takes place during the first two years since the construction of the house. Under the weight of the roof decreases the distance between adjacent bars, resulting in the formation of cracks, as well as reducing the height of the ceiling a couple of centimeters. Also, the shrinkage process can be explained by changes in temperature and humidity, but in this case, the finish inside often remains intact.
• Wood is also a material in which parasites or rot can appear over time.Therefore, you need to carefully handle the bars and monitor the level of humidity.

When the building is erected, you need to carefully plan all the internal work to be done. The main procedures of internal arrangement and decoration include:

• Laying communication systems. These include heating, sewage, electricity, water supply.

• Covering walls with special formulations and antiseptics that protect against fire.

• On request, you can make insulation and waterproofing of the floor and walls.

• Next is laying the subfloor.

• To make the work more organized, it is recommended to prepare in advance a project for the arrangement and decoration of all rooms.

• The installation of partitions and other additional structures.

• Walls, ceilings and floors must be carefully prepared before decorating.
• After that, the finishing itself is carried out.

There are many materials that are used for the interior decoration of a private house of wooden bars. Each raw material has its own special characteristics and is mainly used for a specific type of coating. The most popular materials for finishing wooden houses are:

• lining from plastic and a tree;
• drywall;
• block house;
• decorative plaster;
• decorative rock;
• vinyl siding;
• paint;
• tinting compositions;
• varnishes;
• laminate;
• linoleum.

Wooden lining is laid on a special crate made of wood. Using nails, rails and grooves, the bars are interconnected and attached to the sheathing. Lining is made of various wood species, which include pine, spruce, linden, alder. The material significantly affects the appearance, strength and class to which the products belong. ATProvide the following classification:

• Extra class. Lining, which is not observed defects.
• Class A. It implies high quality, and even the presence of small knots does not spoil the overall look of the coating.
• Class B. The average quality, knots in the products come across more often.
• The lowest class is C. This implies the presence of not only knots and irregularities in the material, but also color differences.

Vinyl siding or plastic lining They are excellent for installation in rooms with various purposes, as these coatings are resistant to various influences. In addition, they create an additional layer of heat due to the voids present in the structure. Installation of plastic lining is carried out on a frame made of metal. Material with vinyl surface resistant to moisture and sunlight. In addition, it is presented in a variety of color options.

The special material is decorative artificial stonewhich is made from various raw materials. This material mainly plays an accent role in the finishing of profiled timber. The stone is placed on the crate, imitating various rocks. With the help of this coating, zones in large rooms are highlighted, and accents are placed in the interior.

It is also worth paying attention tofrom which timber the construction of the house itself is made. The bar can be made of various grades of wood. The most popular is pine. It has the following characteristics:

• Due to the soft structure of wood fibers, the material is excellent for processing.
• This wood is strong, forms quite reliable frame of the dwelling.
• Pine bars are environmentally friendly, they do not emit substances harmful to human health.
• The shade of pine bars, as a rule, uniform. Most often, the natural material is painted in warm colors.
• With all the positive characteristics of pine wood is sold at a very affordable price for most of the population.

Among other types of wood for the construction of log houses are popular cedar, larch, spruce, fir. In many ways, their characteristics are similar to pine. Also bars can be laid on various technologies that determine the choice of a suitable material for interior decoration.

Drywall It is a very flexible and flexible raw material for decorating a house from ordinary bars. Before laying it is necessary to carefully treat the surface of the walls.Material is fastened on a special frame structure. Most often, wooden lathing is used as it, a layer of insulation is laid in the space between the plasterboard and the wall. The fixing of GLA-sheets is carried out with the help of screws, and the seams between them are subsequently processed with plaster compositions and become less noticeable.

An alternative frame material is Rounded glued timber. Its difference from the standard is that the building in this case practically does not shrink. The walls of these bars are smooth and elegant, so their texture is often left in sight for interior decoration.

Some owners of private houses decorate their interior using imitation of a bar-shaped relief. To create it use block house - a kind of wall paneling, which is a planed board, one side of which ideally imitates timber. The block house is installed on the crate, but it does not have to be placed in all cases. It will be required for laying insulation layer or masking communications. The crate is made of small bars or galvanized profile.

The difference between a house block and an ordinary lining is that the latter can be laid both horizontally and vertically. Imitation timber is placed only in the horizontal direction.

To get a solid and organic interior, it is recommended to pre-design the design of each room and choose the most appropriate style directions. In the design of a country house, the actual option will be chalet or hunting style. It looks very brutal and involves a combination of materials such as wood and stone in the design of the walls. Most often, rooms are decorated with clapboard, the walls are decorated with various hunting attributes, for example, with animal heads or hunting gear.

Russian style looks good in the design of the interior of a private house. It suggests the structure of the bars on the walls. Floors are allowed to issue a laminate, imitating large boards. In the center of the room must be a massive stove.

This type of house can also be arranged in European, Scandinavian or Provencal style. In these cases, the special feature will be the decoration of the wall paneling or siding of light shades. Sometimes a small number of bright accents is welcomed. Windows are made using light screens or curtains.

In style minimalismAs a rule, large features dominate. This concerns not only the texture of the surface, which can be in the form of bars, but also other details, such as windows and furniture. Having decided on the features of the styles, you can choose the most suitable option for decorating your home.

No less important than the choice of material and style, the process of covering the various surfaces of a wooden house with their own hands. Features of this procedure depends on the selected area. The main surfaces for decoration are walls, floor, ceiling.

It is better to begin the process of decorating surfaces from the ceiling, especially if you prefer to paint the ceiling and walls, or to varnish them. The ceiling can also be sheathed with plasterboard, create tension structures.

In case of painting the ceiling, its surface must be thoroughly cleaned and coated with a primer. After 24 hours, when it dries, you can begin the process of staining. For its implementation using a roller with a long nap. The process itself must be carried out quite quickly, because the paint quickly hardens on the ceiling surface. In this case, it is desirable that there is an assistant who could indicate color irregularities during dyeing (they can only be seen from below).

The walls of the room can be decorated with various materials.But regardless of the selected raw materials, it is important to remember that the first stage of work involves cleaning and degreasing the surface. The process of preparing the walls also includes laying insulation and a waterproofing layer, processing putty. Some prefer to just plaster the house from the inside. But in this case it is worth remembering that the plaster is not recommended to be applied soon after the house is built.

A roller can be used to apply the coloring compositions, but it is better to carry out the work with a brush for processing corners and hard-to-reach areas. When choosing a varnish, pay attention to the content of harmful things in it, as well as the texture itself, which can be glossy, semi-gloss and matte. Often, evens are even stuck on fabric wallpapers.

Arrangement of the floor is also a very important point in the interior trim of the house of uneven bars. In a private house there are two types of floor - rough and fair.

The draft design is the foundation. It consists of a log, between which is placed a layer of waterproofing and insulation.Next, on top of these layers are covered with boards. For private construction double construction is recommendedbecause it is more capable of retaining heat. The finish coating is applied directly to the boards.

Finishing coverage is carried out in several stages.

1. Laying a layer of waterproofing on the boards of the subfloor. As a material, a polymer membrane of a film or roofing material can be used.
2. Installation of a bar mounted on an edge of a rectangular section of 5 x 10 cm. Features of the device of this layer depend on the specific finishing coating.
3. Reliable fastening of a power set to a floor. To carry out this type of work, it is recommended to use screws of suitable size.
4. Laying insulation in free space. As a heat insulator can be used mineral fiber, glass wool, or even foam.
5. Flooring finishing layer - the final stage.

So that the process of finishing the interior of a wooden house was carried out without complications, better to listen to the recommendations of experts:

• When laying the floor of wood, you can apply wedge technology to achieve the best joint between the floorboards.

• In order to avoid condensation on the wooden surface in a suspended ceiling, a waterproofing layer made of a polymer membrane should be embedded in the suspended ceiling.

• Pay attention to the furniture for the house from a bar was made of natural raw materials, otherwise the design concept may be violated.

• You can use special sealants between the joints of the logs. Such sealing means have a special structure and can even act not only as a functional, but also as a decorative element.

• If you do not have much experience in the implementation of finishing works, then invite specialists to finish the wooden house, since some works really require professional skills.

There are many ready-made solutions about how best to decorate the rooms of a wooden house. The most successful and interesting are the following options:

• Decorative stone is often present on individual elements of a wooden house, emphasizing their importance in a particular room. Such coatings often emit walls near the fireplace or dining areas.

• The surface of the floor can be lined with artificially aged boards. This detail will successfully complement some interior styles.

• Unusual in the interior of the log house looks wicker furniture. It looks original, but it does not overload the situation.

• Often in the houses of the timber used wooden beams for ceiling decoration.

Using all the above recommendations and nuances, you can make the perfect interior in every room of a wooden house.

And a few more ideas will be found in the video below.